journal article·2023-06

Mechanical Properties and Microstructure Evolution of Cryorolled AlCoCrFeNi-Reinforced Aluminum Matrix Composites Tensile Tested at Room and Cryogenic Temperatures

Kaiguang Luo, Gang Lei, Shilei Liu, Charlie Kong, Hailiang Yu

Publisher page

Abstract

The AlCoCrFeNi high-entropy alloy particles (HEAp)-reinforced aluminum matrix composites (AMCs) were fabricated by stir casting and subsequent cryorolling. The tensile mechanical properties of the HEAp/AMCs were investigated at room temperature (298 K) and cryogenic temperature (173 K). The microstructures of the HEAp/AMCs were studied using scanning electron microscopy (SEM), electron backscatter diffraction, and transmission electron microscopy (TEM). The tensile tested results show that both the ultimate tensile strength and elongation of HEAp/AMCs sheets at cryogenic temperature are higher than those at room temperature. The ultimate tensile strength of 3 wt pct HEAp/AMCs is increased from 204 MPa (room temperature) to 251 MPa (cryogenic temperature). The improvement in strengths of the HEAp/AMCs at cryogenic temperature is due to the coefficient of thermal expansion mismatch reinforcement and the dislocation reinforcement. The HEAp/AMCs have a higher elongation in the cryogenic environment, in which the particles have a higher length–diameter ratio along the tensile direction. The molecular dynamics simulation of void nucleation in aluminum alloy deformed at 298 K and 173 K shows that the void nucleation threshold is higher and the nucleation rate is slower at cryogenic temperature, which contribute to the higher elongation of the HEAp/AMCs. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. C. Tan, J. Su, Y. Liu, Z. Feng, X. Song, X. Wang, B. Chen, and H. Xia: Composites B, 2022, vol. 239, p. 109966.10.1016/j.compositesb.2022.109966 ↗
2. G. Huang, J. Wu, W. Hou, L.H. Ahmad Shah, A.R.H. Midawi, F. Cao, A. Gerlich, Y. Shen, and F. Meng: Mater. Sci. Eng. A, 2021, vol. 823, p. 141764.10.1016/j.msea.2021.141764 ↗
3. H. Cao, Y. Su, D. Zhang, and Q. Ouyang: Composites B, 2021, vol. 223, p. 109080.10.1016/j.compositesb.2021.109080 ↗
4. X. Rong, D. Zhao, C. He, C. Shi, E. Liu, and N. Zhao: Acta Mater., 2021, vol. 204, p. 116524.10.1016/j.actamat.2020.116524 ↗
5. S. Lakra, T.K. Bandyopadhyay, S. Das, and K. Das: J. Alloyd Compd., 2020, vol. 842, p. 155745.10.1016/j.jallcom.2020.155745 ↗
6. M. Zhang, C. Wang, G. Mi, and Q. Ouyang: Composites B, 2022, vol. 238, p. 109882.10.1016/j.compositesb.2022.109882 ↗
7. Z.L. Chao, L.T. Jiang, G.Q. Chen, J. Qiao, Q. Z, Z.H. Yu, Y.F. Cao, and G.H. Wu: Composites B, 2019, vol. 161, pp. 627–38.10.1016/j.compositesb.2018.12.147 ↗
8. W.J. Wang, V. Gauthier-Brunet, G.P. Bei, G. Laplanche, J. Bonneville, A. Joulain, and S. Dubois: Mater. Sci. Eng. A, 2011, vol. 530, pp. 168–73.10.1016/j.msea.2011.09.068 ↗
9. Y. Sun, C. Zhou, Z. Zhao, and G. Wu: Mater. Charact., 2021, vol. 177, p. 111204.10.1016/j.matchar.2021.111204 ↗
10. L.F. Ali, N. Kuppuswamy, R. Soundararajan, K.R. Ramkumar, and S. Sivasankaran: Mater. Charact., 2021, vol. 172, p. 110903.10.1016/j.matchar.2021.110903 ↗
11. J. Nie, Y. Liu, F. Wang, H. Zhou, Y. Cao, X. Liu, X. An, X. Liao, Y. Zhu, and Y. Zhao: Mater. Sci. Eng. A, 2021, vol. 801, p. 140414.10.1016/j.msea.2020.140414 ↗
12. S. Liu, K. Luo, H. Gu, H. Gao, C. Kong, and H. Yu: Scr. Mater., 2023, vol. 222, p. 115004.10.1016/j.scriptamat.2022.115004 ↗
13. R.K. Nutor, Q. Cao, R. Wei, Q. Su, G. Du, X. Wang, F. Li, D. Zhang, and J. Jiang: Sci. Adv., 2021, vol. 7, p. eabi4404.10.1126/sciadv.abi4404 ↗
14. B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie: Science, 2014, vol. 345, pp. 1153–8.10.1126/science.1254581 ↗
15. J. Li, Y. Li, F. Wang, X. Meng, L. Wan, Z. Dong, and Y. Huang: Mater. Sci. Eng. A, 2020, vol. 792, p. 139755.10.1016/j.msea.2020.139755 ↗
16. G. Li, H. Wen, H. Wang, W. Ren, Y. Yan, J. Chen, C. Wang, and Y. Zhao: J. Alloys Compd., 2021, vol. 861, p. 158439.10.1016/j.jallcom.2020.158439 ↗
17. T. Lu, S. Scudino, W. Chen, P. Wang, D. Li, M. Mao, L. Kang, Y. Liu, and Z. Fu: Mater. Sci. Eng. A, 2018, vol. 726, pp. 126–36.10.1016/j.msea.2018.04.080 ↗
18. G.M. Karthik, S. Panikar, G.D.J. Ram, and R.S. Kottada: Mater. Sci. Eng. A, 2017, vol. 679, pp. 193–203.10.1016/j.msea.2016.10.038 ↗
19. W. Chen, Z. Li, T. Lu, T. He, R. Li, B. Li, B. Wan, Z. Fu, and S. Scudino: Mater. Sci. Eng. A, 2019, vol. 762, p. 138116.10.1016/j.msea.2019.138116 ↗
20. J. Wang, Z. Kou, S. Fu, S. Wu, S. Liu, M. Yan, Z. Ren, D. Wang, Z. You, S. Lan, H. Hahn, X. Wang, and T. Feng: J. Mater. Sci. Technol., 2022, vol. 115, pp. 29–39.10.1016/j.jmst.2021.11.025 ↗
21. A. Arab, Y. Guo, Z.D.I. Sktani, and P. Chen: Intermetallics, 2022, vol. 147, p. 107601.10.1016/j.intermet.2022.107601 ↗
22. K. Luo, H. Xiong, Y. Zhang, H. Gu, Z. Li, C. Kong, and H. Yu: J. Alloys Compd., 2022, vol. 893, p. 107601.10.1016/j.jallcom.2021.162370 ↗
23. P. Manikandan, T.A. Prabhu, S.K. Manwatkar, G.S. Rao, S.V.S.N. Murty, D. Sivakumar, B. Pant, and M. Mohan: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 3759–76.10.1007/s11661-021-06337-y ↗
24. Y. Liu, X. Zhao, J. Li, L. Bhatta, K. Luo, C. Kong, and H. Yu: J. Alloys Compd., 2021, vol. 860, p. 158449.10.1016/j.jallcom.2020.158449 ↗
25. X. Zhong, Q. Zhang, M. Ma, J. Xie, M. Wu, S. Ren, and Y. Yan: Mater. Des., 2022, vol. 219, p. 110724.10.1016/j.matdes.2022.110724 ↗
26. M. Naeem, H. He, S. Harjo, T. Kawasaki, F. Zhang, B. Wang, S. Lan, Z. Wu, Y. Wu, Z. Lu, C.T. Liu, and X. Wang: Scr. Mater., 2020, vol. 188, pp. 21–5.10.1016/j.scriptamat.2020.07.004 ↗
27. K. Luo, S. Liu, H. Xiong, Y. Zhang, C. Kong, and H. Yu: Met. Mater. Int., 2022, vol. 28, pp. 2811–21.10.1007/s12540-021-01159-4 ↗
28. S. Plimpton: J. Comput. Phys., 1995, vol. 117, pp. 1–9.10.1006/jcph.1995.1039 ↗
29. L. Niu, Q. Zhang, Y. Ma, Y. Chen, B. Han, and K. Huang: Int. J. Plast., 2022, vol. 149, p. 103185.10.1016/j.ijplas.2021.103185 ↗
30. J.M. Winey, A. Kubota, and Y.M. Gupta: Model. Simul. Mater. Sci., 2009, vol. 17, p. 55004.10.1088/0965-0393/17/5/055004 ↗
31. A. Stukowski: Model. Simul. Mater. Sci., 2010, vol. 18, p. 15012.10.1088/0965-0393/18/1/015012 ↗
32. X. Yang, X. Zeng, J. Wang, J. Wang, F. Wang, and J. Ding: Mech. Mater., 2019, vol. 135, pp. 98–113.10.1016/j.mechmat.2019.05.005 ↗
33. R. Chen, G. Qin, H. Zheng, L. Wang, Y. Su, Y. Chiu, H. Ding, J. Guo, and H. Fu: Acta Mater., 2018, vol. 144, pp. 129–37.10.1016/j.actamat.2017.10.058 ↗
34. Y. Guo, L. Liu, W. Zhang, K. Yao, Z. Zhao, J. Shang, J. Qi, M. Chen, R. Zhao, and F. Wu: J. Alloys Compd., 2021, vol. 889, p. 161676.10.1016/j.jallcom.2021.161676 ↗
35. T. Wang, H. Zhang, C. Liu, X. Gong, Y. Pei, Y. Zou, Y. Liu, and Q. Wang: J. Alloys Compd., 2022, vol. 912, p. 165175.10.1016/j.jallcom.2022.165175 ↗
36. M.C. Zang, H.Z. Niu, H.R. Zhang, H. Tan, and D.L. Zhang: Mater. Sci. Eng. A, 2021, vol. 817, p. 141344.10.1016/j.msea.2021.141344 ↗
37. C.A. Smith, S. Biswas, B.D. Miller, B. Kombaiah, D. Frazer, D.D. Keiser, and A. Aitkaliyeva: J. Nucl. Mater., 2022, vol. 563, p. 153617.10.1016/j.jnucmat.2022.153617 ↗
38. N. Lu, S. Moniri, M.R. Wiltse, J. Spielman, N. Senabulya, and A.J. Shahani: Acta Mater., 2021, vol. 217, p. 117145.10.1016/j.actamat.2021.117145 ↗
39. F. Dong, Y. Yi, S. Huang, B. Wang, H. He, K. Huang, and C. Wang: Mater. Sci. Eng. A, 2021, vol. 823, p. 141722.10.1016/j.msea.2021.141722 ↗
40. K. Huang, S. Huang, Y. Yi, F. Dong, and H. He: J. Alloys Compd., 2022, vol. 902, p. 163821.10.1016/j.jallcom.2022.163821 ↗
41. V. Khademi, T.R. Bieler, and C.J. Boehlert: Int. J. Plast., 2021, vol. 146, p. 103084.10.1016/j.ijplas.2021.103084 ↗
42. W. Liu, W. Cheng, and S. Yuan: Int. J. Mech. Sci., 2021, vol. 195, p. 106266.10.1016/j.ijmecsci.2021.106266 ↗
43. S. Yuan, W. Cheng, W. Liu, and Y. Xu: J. Mater. Process. Technol., 2020, vol. 284, p. 116743.10.1016/j.jmatprotec.2020.116743 ↗
44. S. Jayalakshmi, S. Gupta, S. Sankaranarayanan, S. Sahu, and M. Gupta: Mater. Sci. Eng. A, 2013, vol. 581, pp. 119–27.10.1016/j.msea.2013.05.072 ↗
45. H. Chou, Y. Chang, S. Chen, and J. Yeh: Mater. Sci. Eng. B, 2009, vol. 163, pp. 184–89.10.1016/j.mseb.2009.05.024 ↗
46. Z. Zhang and D. Chen: Scr. Mater., 2006, vol. 54, pp. 1321–26.10.1016/j.scriptamat.2005.12.017 ↗
47. J. Li, J. Zhou, S. Xu, J. Sheng, S. Huang, Y. Sun, Q. Sun, and E.A. Boateng: Mater. Sci. Eng. A, 2017, vol. 707, pp. 612–19.10.1016/j.msea.2017.09.049 ↗
48. G.R. Li, T. Qin, A.G. Fei, H.M. Wang, Y.T. Zhao, G. Chen, and X.Z. Kai: J. Alloys Compd., 2019, vol. 802, pp. 50–69.10.1016/j.jallcom.2019.06.007 ↗
49. L.P. Kubin and A. Mortensen: Scr. Mater., 2003, vol. 48, pp. 119–25.10.1016/S1359-6462(02)00335-4 ↗
50. S. Rui, Y. Shang, Y. Su, W. Qiu, L. Niu, H. Shi, S. Matsumoto, and Y. Chuman: Int. J. Fatigue, 2018, vol. 113, pp. 264–76.10.1016/j.ijfatigue.2018.04.016 ↗
51. D.D. Zhang, J.Y. Zhang, J. Kuang, G. Liu, and J. Sun: Acta Mater., 2021, vol. 220, p. 117288.10.1016/j.actamat.2021.117288 ↗
52. D.C. Yang, Y.H. Jo, Y. Ikeda, F. Körmann, and S.S. Sohn: J. Mater. Sci. Technol., 2021, vol. 90, pp. 159–67.10.1016/j.jmst.2021.02.034 ↗
53. Z. Wu, H. Bei, G.M. Pharr, and E.P. George: Acta Mater., 2014, vol. 81, pp. 428–41.10.1016/j.actamat.2014.08.026 ↗
54. L. Su, G. Deng, V. Luzin, H. Wang, Z. Wang, H. Yu, H. Li, and A.K. Tieu: Mater. Sci. Eng. A, 2020, vol. 780, p. 139190.10.1016/j.msea.2020.139190 ↗
55. F. Weng, Y. Chew, Z. Zhu, S. Sui, C. Tan, X. Yao, F.L. Ng, W.K. Ong, and G. Bi: Composites B, 2021, vol. 216, p. 108837.10.1016/j.compositesb.2021.108837 ↗
56. Y. Liu, Y. Cao, Q. Mao, H. Zhou, Y. Zhao, W. Jiang, Y. Liu, J.T. Wang, Z. You, and Y. Zhu: Acta Mater., 2020, vol. 189, pp. 129–44.10.1016/j.actamat.2020.03.001 ↗
57. Z. Xu, H.J. Roven, and Z. Jia: Mater. Sci. Eng. A, 2017, vol. 679, pp. 379–90.10.1016/j.msea.2016.10.049 ↗
58. S. Tian, W. Chen, S. Chen, Y. Gu, X. Gong, and X. Zhan: J. Manuf. Process., 2020, vol. 56, pp. 777–85.10.1016/j.jmapro.2020.05.020 ↗
59. Q. Gao, X. Jiang, H. Sun, Y. Zhang, Y. Fang, D. Mo, and X. Li: Mater. Lett., 2022, vol. 310, p. 131504.10.1016/j.matlet.2021.131504 ↗
60. D.D. Zhang, J.Y. Zhang, J. Kuang, G. Liu, and J. Sun: Acta Mater., 2022, vol. 233, p. 117981.10.1016/j.actamat.2022.117981 ↗
61. K.K. Alaneme, I.B. Akintunde, P.A. Olubambi, and T.M. Adewale: J. Mater. Res. Technol., 2013, vol. 2, pp. 60–7.10.1016/j.jmrt.2013.03.012 ↗
62. K.K. Alaneme, M.O. Bodunrin, and A.A. Awe: J. King Saud Univ. Sci., 2018, vol. 30, pp. 96–103.
63. P.D. Srivyas and M.S. Charoo: Mater. Today Proc., 2018, vol. 5, pp. 20041–53.10.1016/j.matpr.2018.06.371 ↗
64. S.M. Arab, S. Karimi, S.A.J. Jahromi, S. Javadpour, and S.M. Zebarjad: Mater. Sci. Eng. A, 2015, vol. 632, pp. 50–7.10.1016/j.msea.2015.02.032 ↗
65. Y. Pazhouhanfar and B. Eghbali: Mater. Sci. Eng. A, 2018, vol. 710, pp. 172–80.10.1016/j.msea.2017.10.087 ↗
66. V. Bharath, M. Nagaral, V. Auradi, and S.A. Kori: Proc. Mater. Sci., 2014, vol. 6, pp. 1658–67.10.1016/j.mspro.2014.07.151 ↗
67. B.P. Kumar and A.K. Birru: Trans. Nonferrous Metal. Soc. China, 2017, vol. 27, pp. 2555–72.10.1016/S1003-6326(17)60284-X ↗
68. M.S. Arab, N. El Mahallawy, F. Shehata, and M.A. Agwa: Mater. Des., 2014, vol. 64, pp. 280–86.10.1016/j.matdes.2014.07.045 ↗
69. H.K. Issa, A. Taherizadeh, A. Maleki, and A. Ghaei: Ceram. Int., 2017, vol. 43, pp. 14582–92.10.1016/j.ceramint.2017.06.057 ↗
70. K.K. Alaneme and A.O. Aluko: Sci. Iran., 2012, vol. 19, pp. 992–96.10.1016/j.scient.2012.06.001 ↗