journal article·2023-03Open access

Texture Development During Annealing in a Low-Carbon Formable Steel Containing Impurities from Increased Scrap Use

Jiaqi Duan, Didier Farrugia, Claire Davis, Zushu Li

Abstract

Abstract Impurities (Cu, Sn, Cr, and Ni) have been added to a low-carbon formable strip steel to simulate the scenario of increased use of scrap during steel production. Texture evolution during annealing of the cold-rolled base steel and impurity-added steel have been investigated. The impurities were shown to suppress the development of the γ-fiber texture. Meanwhile, a higher fraction of random orientations was developed in the impurity-added steel. However, the adverse effect of impurities on the γ-fiber was mitigated during annealing at higher temperatures (650 °C to 750 °C). The correlation between texture development and microstructure heterogeneity, and the effect of impurity additions on texture development are discussed. This work provides guidelines on recycling scrap for the production of low-carbon formable steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. S. Spooner, C. Davis, and Z. Li: Ironmak. Steelmak., 2020, vol. 47, pp. 1100–113.10.1080/03019233.2020.1805276 ↗
2. C. Wang, M. Brämming, and M. Larsson: Steel Res. Int., 2013, vol. 84, pp. 387–94.10.1002/srin.201200185 ↗
3. EU-27 Steel Scrap Specification European Ferrous Recovery and Recycling Federation, (Brussels, Belgium 2007).
4. J. Duan, D. Farrugia, C. Davis and Z. Li, Ironmak. Steelmak. 2021, pp. 1–7.
5. U.F. Kocks, C.N. Tomé and H.-R. Wenk: Texture and anisotropy: preferred orientations in polycrystals and their effect on materials properties (Cambridge University Press, 1998).
6. R.K. Ray: JJ Jonas and RE Hook. Int. Mater. Rev., 1994, vol. 39, pp. 129–72.10.1179/imr.1994.39.4.129 ↗
7. M.Y. Huh and O. Engler: Mater. Sci. Eng. A, 2001, vol. 308, pp. 74–87.10.1016/S0921-5093(00)01995-X ↗
8. D. Raabe, Y. Wang, and F. Roters: Comput. Mater. Sci., 2005, vol. 34, pp. 221–34.10.1016/j.commatsci.2004.12.072 ↗
9. P. Ghosh, C. Ghosh, R.K. Ray, and D. Bhattacharjee: Scripta Mater., 2008, vol. 59, pp. 276–78.10.1016/j.scriptamat.2008.03.044 ↗
10. J.-I. Hamada, N. Ono, and H. Inoue: ISIJ Int., 2011, vol. 51, pp. 1740–748.10.2355/isijinternational.51.1740 ↗
11. Y. Z. Li, S. L. Zhao, S. H. He, C. P. Huang and M. X. Huang, Int. J. Plast. 2022, vol. 155.
12. H. Inagaki: ISIJ Int., 1994, vol. 34, pp. 313–21.10.2355/isijinternational.34.313 ↗
13. P.S. Bate, J. Quinta, and da Fonseca: Mater. Sci. Eng. A, 2004, vol. 380, pp. 365–77.10.1016/j.msea.2004.04.007 ↗
14. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plast, 2005, vol. 21, pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
15. A. Molinari, G.R. Canova, and S. Ahzi: Acta Metall., 1987, vol. 35, pp. 2983–94.10.1016/0001-6160(87)90297-5 ↗
16. A. Després, M. Zecevic, R.A. Lebensohn, J.D. Mithieux, F. Chassagne, and C.W. Sinclair: Acta Mater., 2020, vol. 182, pp. 184–96.10.1016/j.actamat.2019.10.023 ↗
17. B. Hutchinson: Philos. Trans. R. Soc. Lond. Ser. A, 1999, vol. 357, pp. 1471–85.10.1098/rsta.1999.0385 ↗
18. D.P. Field, C.C. Merriman, N. Allain-Bonasso, and F. Wagner: Modell. Simul. Mater. Sci. Eng., 2012, vol. 20, 024007.10.1088/0965-0393/20/2/024007 ↗
19. L.A.I. Kestens and H. Pirgazi: Mater. Sci. Technol., 2016, vol. 32, pp. 1303–15.10.1080/02670836.2016.1231746 ↗
20. N. Rajmohan, Y. Hayakawa, J.A. Szpunar, and J.H. Root: Acta Mater., 1997, vol. 45, pp. 2485–94.10.1016/S1359-6454(96)00371-0 ↗
21. D. Hawezy and S. Birosca: Acta Mater., 2021, vol. 216, 117141.10.1016/j.actamat.2021.117141 ↗
22. M.Z. Quadir and B.J. Duggan: Acta Mater., 2004, vol. 52, pp. 4011–21.10.1016/j.actamat.2004.05.017 ↗
23. A. Ayad, M. Ramoul, A.D. Rollett, and F. Wagner: Mater. Charact., 2021, vol. 171, 110773.10.1016/j.matchar.2020.110773 ↗
24. M.Z. Quadir and B.J. Duggan: Acta Mater., 2006, vol. 54, pp. 4337–50.10.1016/j.actamat.2006.05.026 ↗
25. A.A. Gazder: M. Sánchez-Araiza, J.J. Jonas and E.V. Pereloma. Acta Mater., 2011, vol. 59, pp. 4847–65.10.1016/j.actamat.2011.04.027 ↗
26. I. Kapoor, Y. Lan, A. Rijkenberg, Z. Li, and V. Janik: Mater. Charact., 2018, vol. 145, pp. 686–96.10.1016/j.matchar.2018.09.032 ↗
27. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
28. K. Verbeken, L. Kestens, and J.J. Jonas: Scripta Mater., 2003, vol. 48, pp. 1457–62.10.1016/S1359-6462(03)00078-2 ↗
29. K. Ushioda, N. Yoshinaga, and O. Akisue: ISIJ Int., 1994, vol. 34, pp. 85–91.10.2355/isijinternational.34.85 ↗
30. F. Emren, U. von Schlippenbach, and K. Lücke: Acta Metall., 1986, vol. 34, pp. 2105–17.10.1016/0001-6160(86)90156-2 ↗
31. R. Barbosa, F. Boratto, S. Yue and J.J. Jonas, Process. Microstruct. Proper. HSLA Steels 1987, pp. 51–61.
32. B.L. Li, A. Godfrey, Q.C. Meng, Q. Liu, and N. Hansen: Acta Mater., 2004, vol. 52, pp. 1069–81.10.1016/j.actamat.2003.10.040 ↗
33. H. Homma, S. Nakamura, and N. Yoshinaga: Mater. Sci. Forum, 2004, vol. 467–470, pp. 269–74.10.4028/www.scientific.net/MSF.467-470.269 ↗
34. H. Jin, I. Elfimov, and M. Militzer: J. Appl. Phys., 2014, vol. 115, 093506.10.1063/1.4867400 ↗
35. S. Suzuki, K. Kuroki, H. Kobayashi, and N. Takahashi: Mater. Trans. JIM, 1992, vol. 33, pp. 1068–76.10.2320/matertrans1989.33.1068 ↗
36. H.J. Grabke: ISIJ Int., 1989, vol. 29, pp. 529–38.10.2355/isijinternational.29.529 ↗
37. J. Humphreys, G.S. Rohrer and A. Rollett, In Recrystallisation and related annealing phenomena (Third Edition), ed. J. Humphreys, G.S. Rohrer, and R. Anthony (Elsevier: Oxford, 2017), pp 245–304.10.1016/B978-0-08-098235-9.00007-0 ↗
38. J. Duan, H. Wen, C. Zhou, X. He, R. Islamgaliev and R. Valiev, Mater. Charact. 2020, vol. 159.10.1016/j.matchar.2019.110004 ↗
39. D.G. Cram, X.Y. Fang, H.S. Zurob, Y.J.M. Bréchet, and C.R. Hutchinson: Acta Mater., 2012, vol. 60, pp. 6390–6404.10.1016/j.actamat.2012.08.021 ↗
40. M. Winning, A.D. Rollett, G. Gottstein, D.J. Srolovitz, A. Lim, and L.S. Shvindlerman: Phil. Mag., 2010, vol. 90, pp. 3107–128.10.1080/14786435.2010.481272 ↗
41. R.G. Faulkner, S.H. Song, and P.E.J. Flewitt: Mater. Sci. Technol., 1996, vol. 12, pp. 904–10.10.1179/mst.1996.12.11.904 ↗
42. N. Louat: Philos. Mag. A, 1981, vol. 44, pp. 223–28.10.1080/01418618108244503 ↗
43. Alan Howard Cottrell: Am. J. Phys., 1954, vol. 22, pp. 242–43.10.1119/1.1933704 ↗