Hardenability Improvement Mechanisms and Hardenability-Controlling Factors in Steels With Combined Mo–B Addition
Source abstract
Abstract
To elucidate the hardenability improvement mechanisms and hardenability-controlling factors in low-carbon (C) steels with the combined addition of molybdenum (Mo) and boron (B), the relationship between the hardenability index (Vc−90) and the segregation states of Mo and B at prior austenite grain boundaries were quantitatively investigated using atom probe tomography. The logarithm of the hardenability index showed a negative linear relationship with the estimated values of the total interfacial excess of Mo and B at a cooling rate of Vc−90 in the steels without boride precipitation during cooling. This result suggests that the hardenability is governed by the total concentration of segregating atoms at austenite grain boundaries until boride precipitation occurs. The hardenability improvement mechanism was explained by the suppression of ferrite and bainite nucleation based on the reduction in the austenite grain boundary free energy due to grain boundary segregation. It was supported by the theoretical simple model in terms of the total number of nuclei during continuous cooling. The study also suggests that the boride precipitates themselves degrade the hardenability after boride precipitation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. C.R. Simcoe, A.E. Elsea, and G.K. Manning: Trans. Soc. AIME, 1955, vol. 203, pp. 193–200.
2. M. Ueno and T. Inoue: Trans. Iron Steel Inst. Jpn., 1973, vol. 13, pp. 210–17.10.2355/isijinternational1966.13.210 ↗
3. J.E. Morrral and T.B. Cameron: Boron in Steel, edited by S.K. Banerji and J.E. Morral, The Metallurgical Society of AIME., 1980, pp. 19–32.
4. J.E. Morral and T.B. Cameron: Metall. Trans. A, 1977, vol. 8A, pp. 1817–19.10.1007/BF02646888 ↗
5. M.E. Nicholson: Trans. AIME., 1956, vol. 206, pp. 551–53.
6. R.C. Shrama and G.R. Purdy: Metall. Trans., 1973, vol. 4, pp. 2303–11.10.1007/BF02669369 ↗
7. Ph. Maitrepierre, D. Thivellioer, and R. Tricot: Metall. Trans., 1975, vol. 6A, pp. 287–301.10.1007/BF02667283 ↗
8. P.J. Clemm and J.C. Fisher: Acta Metall., 1955, vol. 3, pp. 70–73.10.1016/0001-6160(55)90014-6 ↗
9. M. Ueno and K. Itoh: Tetsu-to-Hagané, 1988, vol. 74, pp. 1073–80. (in Japanese).10.2355/tetsutohagane1955.74.6_1073 ↗
10. H. Asahi: ISIJ Int., 2002, vol. 42, pp. 1150–55.10.2355/isijinternational.42.1150 ↗
11. K. Ishikawa, H. Nakamura, R. Homma, M. Fujioka, and M. Hoshino: ISIJ Int., 2018, vol. 58, pp. 551–56.10.2355/isijinternational.ISIJINT-2017-579 ↗
12. T. Hara, H. Asahi, R. Uemori, and H. Tamehiro: ISIJ Int., 2004, vol. 44, pp. 1431–40.10.2355/isijinternational.44.1431 ↗
13. F. Han, B. Hwang, D.-W. Suh, Z. Wang, D.L. Lee, and S.-J. Kim: Met. Mater. Int., 2008, vol. 14, pp. 667–72.10.3365/met.mat.2008.12.667 ↗
14. J. Takahashi, K. Ishikawa, K. Kawakami, M. Fujioka, and N. Kubota: Acta Mater., 2017, vol. 133, pp. 41–54.10.1016/j.actamat.2017.05.021 ↗
15. G. Miyamoto, A. Goto, N. Takayama, and T. Furuhara: Scripta Mater., 2018, vol. 154, pp. 168–71.10.1016/j.scriptamat.2018.05.046 ↗
16. K. Hata, K. Fujiwara, K. Kawano, M. Sugiyama, T. Fukuda, and T. Kakeshita: ISIJ inter., 2018, vol. 58, pp. 323–32.10.2355/isijinternational.ISIJINT-2017-441 ↗
17. B. Gault, M.P. Moody, J.M. Cairney, and S.P. Ringer: Springer Series in Materials Science, Atom Probe Microscopy, Springer, New York, 2012.10.1007/978-1-4614-3436-8 ↗
18. T. Fujishiro, T. Hara, and G. Shigesato: Tetsu-to-Hagané, 2015, vol. 101, pp. 300–07. (in Japanese).10.2355/tetsutohagane.101.300 ↗
19. K. Ohno, Y. Okamura, S. Matsuda, K. Yamamoto, and T. Mukai: Tetsu-to-Hagané, 1987, vol. 73, pp. 1010–17. (in Japanese).10.2355/tetsutohagane1955.73.8_1010 ↗
20. K. Ishikawa, H. Nakamura, M. Fujioka, M. Hoshino, J. Takahashi, and K. Kawakami: Tetsu-to-Hagané, 2020, vol. 106, pp. 321–30. (in Japanese).10.2355/tetsutohagane.TETSU-2019-099 ↗
21. M. Azuma, N. Fujita, M. Takahashi, T. Senuma, D. Quidort, and T. Lung: ISIJ Inter., 2005, vol. 45, pp. 221–28.10.2355/isijinternational.45.221 ↗
22. J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
23. T. Nishizawa: Micurososiki-no-Netsurikigaku, The Japanese Institute of Metals, Maruzen, Tokyo, 2005, pp. 111
24. S. Yoshida, K. Ushioda, and J. Ågren: ISIJ Inter., 2014, vol. 54, pp. 685–92.10.2355/isijinternational.54.685 ↗
25. L.H. Van Vlack: Trans. AIME, 1951, vol. 191, pp. 251–59.
26. Z. Yang and R.A. Johnson: Model. Simul. Mater. Sci. Eng., 1993, vol. 34, pp. 707–16.10.1088/0965-0393/1/5/010 ↗
27. W.F. Lange III., M. Enomoto, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 427–40.10.1007/BF02649256 ↗
28. M. Paju, H. Viefhaus, and H.J. Grabke: Steel. Res., 1988, vol. 59, pp. 336–43.10.1002/srin.198801524 ↗
29. L. Karlsson and H. Nordén: Acta Metall., 1988, vol. 36, pp. 13–24.10.1016/0001-6160(88)90024-7 ↗
30. S. He, D. Scheiber, T. Jechtl, F. Moitzi, O. Peil, L. Romaner, S. Zamberger, E.P. Karadenis, V. Razumovskiy, and A.V. Ruban: Phys. Rev. Mater., 2022, vol. 6, 023604.10.1103/PhysRevMaterials.6.023604 ↗
31. M. Enomoto, C.L. White, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 1807–18.10.1007/BF02645149 ↗
32. M. Enomoto, W.F. Lange III., and H.I. Aaronson: Metall. Trans. A, 1986, vol. 17A, pp. 1399–1407.10.1007/BF02650121 ↗