journal article·2023-01

Effect of Austenite Grain Size on the Hot Ductility of Nb-Bearing Peritectic Steel

Zhaozhen Cai, Jiazhi An, Biao Cheng, Miaoyong Zhu

Publisher page

Abstract

Austenitic grain size is an important factor affecting the hot ductility of steel slabs during continuous casting. In the present study, the effects of austenite grain sizes of approximately 250, 550, and 1000 μm on the hot ductility of peritectic and Nb-bearing peritectic steels were measured with a Gleeble-3500 thermomechanical simulator. The morphology of the proeutectoid ferrite and the distribution of Nb(C, N) precipitates were detected by metallurgical microscopy and transmission electron microscopy, respectively. Based on these results, a mechanism was proposed for the effects of the austenite grain size on the hot ductility of peritectic and Nb-bearing peritectic steels. The results showed that the volume fraction of film-like proeutectoid ferrite decreased from 17.2 to 12.6 pct, and the minimum value of the reduction in area (RA) decreased from 42.32 to 35 pct, at 750 °C as the austenite grain size increased from 250 to 1000 μm. The decrease in the proeutectoid ferrite fraction facilitated strain concentration for a long time, which caused hot ductility to decrease. The average diameter of Nb(C, N) decreased from 17.3 to 7.2 nm, and the minimum RA value decreased from 41.5 to 25.4 pct, at 800 °C, as the austenite grain size increased from 250 to 1000 μm in peritectic steel with 0.048 wt pct Nb addition. The decreases in the average diameter of Nb(C, N) precipitates and the volume fraction of film-like proeutectoid ferrite caused strain concentration at the austenite grain boundaries, which decreased hot ductility. Moreover, the decrease in the RA of Nb-bearing peritectic steel increased significantly with increasing austenite grain size.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Y.D. Wang, Q. Ren, L.F. Zhang, X.G. Yang, W. Yang, Y. Ren, and H.J. Zhang: Steel Res. Int., 2021, vol. 92, p. 2000649.10.1002/srin.202000649 ↗
2. Y.S. Lee, S. Kim, D.W. Jang, and S.B. Lee: Mech. Mater., 2022, vol. 166, p. 104240.10.1016/j.mechmat.2022.104240 ↗
3. S.M. Banks, A.S. Tuling, and B. Mintz: Int. J. Metal. Eng., 2013, vol. 2, pp. 188–97.
4. S. Harada, S. Tanaka, H. Misumi, S. Mizoguchi, and H. Horiguchi: ISIJ Int., 1990, vol. 30, pp. 310–16.10.2355/isijinternational.30.310 ↗
5. J.K. Brimacombe and K. Sorimachi: Metall. Trans. B, 1997, vol. 8, pp. 489–505.10.1007/BF02696937 ↗
6. H.G. Suzuki, S. Nishimura, and S. Yamaguchi: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 48–56.10.2355/isijinternational1966.22.48 ↗
7. B.G. Thomas, J.K. Brimacombe, and I.V. Samarasekera: ISS Tech., 1986, vol. 7, pp. 7–20.
8. B. Mintz and J.M. Arrowsmith: Met. Technol., 1979, vol. 6, pp. 24–32.10.1179/030716979803276471 ↗
9. K.C. Cho, D.J. Mun, Y.M. Koo, and J.S. Lee: Mat. Sci. Eng. A, 2011, vol. 528, pp. 3556–61.10.1016/j.msea.2011.01.097 ↗
10. B. Mintz and D.N. Crowther: Int. Mat. Rev., 2010, vol. 55, pp. 168–96.10.1179/095066009X12572530170624 ↗
11. M. Gontijo, C. Hoflehner, P. Estermann, S. Llie, J. Six, and C. Sommitsch: Steel Res. Int., 2020, vol. 91, p. 2000222.10.1002/srin.202000222 ↗
12. J. Moon, J.H. Jang, S.D. Kim, T.H. Lee, H.Y. Ha, C.H. Lee, and H.U. Hong: Mater. Charact., 2020, vol. 164, p. 110319.10.1016/j.matchar.2020.110319 ↗
13. M.H. Kwon, J.K. Kim, C. De, J. Bian, H. Mohrbacher, T. Song, and S.K. Kim: Metal. Mater. Trans. A, 2018, vol. 49A, pp. 5509–23.10.1007/s11661-018-4893-8 ↗
14. Y. Liu, Y. Sun, and H. Wu: Mater. Sci. Technol., 2020, vol. 36, pp. 868–76.10.1080/02670836.2020.1745426 ↗
15. G. Qian, G. Cheng, and Z. Hou: ISIJ Int., 2014, vol. 54, pp. 1611–620.10.2355/isijinternational.54.1611 ↗
16. H. Liu, J. Liu, B. Wu, Y. Shen, Y. He, H. Dong, and X. Su: Mater. Sci. Eng. A, 2017, vol. 708A, pp. 360–74.10.1016/j.msea.2017.10.001 ↗
17. Y. Liu, Y. Sun, and H. Wu: Int. J. Miner. Metal. Mater., 2021, vol. 28, pp. 1011–21.10.1007/s12613-020-2092-2 ↗
18. M.H. Kang, J.S. Lee, Y.M. Koo, S.J. Kim, and N.H. Heo: Metal. Mater. Trans. A, 2014, vol. 45A, pp. 4302–06.10.1007/s11661-014-2402-2 ↗
19. L. Borrmann, D. Senk, B. Steenken, and J.L. Luiz: Steel Res. Int., 2021, vol. 92, p. 2000346.10.1002/srin.202000346 ↗
20. K.M. Lekganyane, R.J. Mostert, C.W. Siyasiya, and K.M. Bank: Mater. Sci. Eng. A, 2021, vol. 810, p. 141007.10.1016/j.msea.2021.141007 ↗
21. D. Hong, S. Kwon, and C. Yim: Met. Mater. Int., 2021, vol. 27, pp. 298–305.10.1007/s12540-020-00713-w ↗
22. J. Yu, S. Zhang, H. Li, Z. Jiang, H. Feng, P. Xu, and P. Han: J. Mater. Sci. Technol., 2022, vol. 112, pp. 184–94.10.1016/j.jmst.2021.11.005 ↗
23. D.N. Crowther and B. Mintz: Mater. Sci. Technol., 1986, vol. 2, pp. 951–55.10.1179/mst.1986.2.9.951 ↗
24. T. Maki, T. Nagamichi, N. Abe, and I. Tamura: Tetsu-to-Hagané, 1985, vol. 71, pp. 1367–74.10.2355/tetsutohagane1955.71.10_1367 ↗
25. H.T. Tsai, H. Yin, and M. Lowry: Iron Steel Technol., 2006, vol. 3, pp. 23–31.
26. R.J. Dippenaar, S.C. Moon, and E.S. Szekeres: Iron Steel Technol., 2007, vol. 4, pp. 105–15.
27. C. Bernhard, J. Reiter, and H. Presslinger: Metal. Mater. Trans. B, 2008, vol. 39B, pp. 885–95.10.1007/s11663-008-9197-8 ↗
28. S. Tsuchiya, M. Ohno, K. Matsuura, and K. Isobe: Acta Mater., 2011, vol. 59, pp. 3334–42.10.1016/j.actamat.2011.02.007 ↗
29. J. An, Z. Cai, and M. Zhu: Metal. Mater. Trans. A, 2022, vol. 53A, pp. 1540–51.10.1007/s11661-022-06619-z ↗
30. M. Enomoto and H.I. Aaronson: Metal. Mater. Trans. A, 1986, vol. 17A, pp. 1385–97.10.1007/BF02650120 ↗
31. Z.Q. Liu, G. Miyamoto, Z.G. Yang, and T. Furuhara: Metal. Mater. Trans. A, 2013, vol. 44A, pp. 5456–67.10.1007/s11661-013-1885-6 ↗
32. R.A. Farrar, Z. Zhang, S.R. Bannister, and G.S. Barritte: J. Mater. Sci., 1993, vol. 28, pp. 1385–90.10.1007/BF01191982 ↗
33. H. Zhao and E.J. Palmiere: Mater. Charact., 2018, vol. 145, pp. 479–89.10.1016/j.matchar.2018.09.013 ↗
34. T. Maki T, T. Nagamichi, N. Abe and I. Tamura. Tetsu-to-Hagané, 1985, vol. 71, pp. 1367–74.10.2355/tetsutohagane1955.71.10_1367 ↗
35. Y. Maehara, K. Yasumoto, H. Tomono, T. Nagamichi, and Y. Ohmori: Mater. Sci. Technol., 1990, vol. 6, pp. 793–806.10.1179/mst.1990.6.9.793 ↗
36. G.K. Tirumalasetty, M.A. Van Huis, and C.M. Fang: Acta Mater., 2011, vol. 59, pp. 7406–15.10.1016/j.actamat.2011.08.012 ↗
37. Q. L. Yong. The Second Phase in iron & steel. 2nd ed., Metallurgical Industry Press, Beijing, China, 2006, pp. 30, 44, 96–105.
38. S.F. Medina, A. Quispe, and M. Gomez: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1524–39.10.1007/s11661-013-2068-1 ↗
39. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206.10.1179/mst.1987.3.3.197 ↗