journal article·2022-07Open access

On the Rate Dependence of Precipitate Formation and Dissolution in a Nickel-Base Superalloy

Neil D’Souza, Mark C. Hardy, Bryan Roebuck, Wei Li, Geoff D. West, David M. Collins

Abstract

Abstract The temporal dependence of$$\gamma '$$dissolution in the polycrystalline Ni-base superalloy RR1000 has been studied with implications to thermo-mechanical processing. A resistivity-based method using an electro-thermal mechanical testing (ETMT), which overcomes the drawbacks associated with other approaches, such as calorimetry, dilatometry, and diffraction, has been used to explore the effect of transient and isothermal thermal cycles. This is supplemented by DICTRA numerical models that simulate the diffusion within the$$\gamma $$phase up to the$$\gamma /\gamma '$$interface. It is demonstrated that dissolution is affected by heating rate as well as the precipitate size. Below a threshold heating rate of$$\sim $$0.1$${^\circ }$$C s$$-1$$, the dissolution kinetics are marginally affected, however, is sensitive to microstructure. The role of precipitate size during dissolution is governed by diffusion flux in the$$\gamma $$phase at the$$\gamma /\gamma '$$interface, which is inversely proportional to size. It is argued that numerical simulations that predict constitutional liquation during rapid heating by altering the width of the computation domain to match the average precipitate size of the$$\gamma '$$population will yield inaccurate predictions. The influence of the heating rate on the nucleation undercooling, during subsequent cooling, has also been addressed. With increasing heating rates, the local$$\gamma '$$solvus temperature is shifted to progressively higher temperatures. Unless complete dissolution of$$\gamma '$$occurs prior to subsequent cooling, erroneous interpretations of nucleation undercooling can arise.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. M. Durrand-Charre: The Microstructure of Superalloys (CRC Press, Amsterdam, 1997).
2. N. Warnken, H. Larsson, and R. Reed: Mater. Sci. Tech., 2009, vol. 25, pp. 179–85.10.1179/174328408X369320 ↗
3. R. Mitchell, J. Lemsky, R. Ramanathan, H. Li, K. Perkins, and L. Connor, in Superalloys 2008. ed. by R. Reed, K. Green, P. Caron, T. Gabb, M. Fahrmann, E. Huron, S. Woodard (The Minerals, Metals and Materials Society, Warrendale, PA, 2008), pp. 347–56.10.7449/2008/Superalloys_2008_347_356 ↗
4. R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Polt, and E. Kozechnik: Acta Mater., 2009, vol. 57, pp. 5739–47.10.1016/j.actamat.2009.08.002 ↗
5. D.B.T.P. Gabb, D. Wei, D. Mourer, D. Furrer, A. Garg, D. Ellis, in Superalloys 2000. ed. by T. Pollock, R. Kissinger, R. Bowman, K. Green, M. McLean, S. Olson, J. Schirra (The Minerals, Metals and Materials Society, Warrendale, PA, 2000), pp. 405–1410.7449/2000/Superalloys_2000_405_414 ↗
6. S.L. Semiatin, N. Levikulich, and J. Tiley: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5281–96.10.1007/s11661-019-05422-7 ↗
7. F. Masoumi, D. Shariari, M. Jahazi, J. Cormier, and A. Devaux: Sci. Rep. , 2016, vol. 6, p. 28650.10.1038/srep28650 ↗
8. A. Singh, S. Nag, S. Chattopadhyay, Y. Ren, J. Tiley, G. Vishwanathan, H. Fraser, and R. Banerjee: Acta Mater., 2013, vol. 61, pp. 280–93.10.1016/j.actamat.2012.09.058 ↗
9. S. Babu, M. Miller, J. Vitek, and S. David: Acta Mater., 2001, vol. 49, pp. 4149–60.10.1016/S1359-6454(01)00314-7 ↗
10. Y. Chen, T. Slater, E. Lewis, E. Francis, M. Bruke, M. Preuss, and S. Haigh: Ultramicroscopy , 2014, vol. 144, pp. 1–8.10.1016/j.ultramic.2014.04.001 ↗
11. P. Bagot, O. Silk, J. Douglas, S. Pedrazzini, D. Crudden, T. Martin, M. Hardy, M. Moody, and R. Reed: Acta Mater., 2017, vol. 125, pp. 156–65.10.1016/j.actamat.2016.11.053 ↗
12. C. Booth-Morrison, J. Weninger, C. Sudbrack, Z. Ma o, R. Noebe, and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 3422–38.10.1016/j.actamat.2008.03.016 ↗
13. C. Booth-Morrison, R. Noebe, and D. Seidman: Acta Mater., 2009, vol. 57, pp. 909–20.10.1016/j.actamat.2008.10.029 ↗
14. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 981–95.10.1016/j.jallcom.2015.11.002 ↗
15. S. Semiatin, N. Levkulich, A. Saurber, D. Mahaffey, E. Payton, and O. Senkov: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5567–78.10.1007/s11661-017-4322-4 ↗
16. M. Jahazi, and A. Mashreghi: Mater. Sci. Technol., 2002, vol. 18, pp. 4558–4622.10.1179/026708302225001606 ↗
17. E. Payton, T. Wynn, and M. Mills: J. Mater. Sci., 2012, vol. 47, pp. 7305–11.10.1007/s10853-012-6684-8 ↗
18. H. Huang, G. Liu, H. Wang, A. Ullah, and B. Hu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1075–84.10.1007/s11661-019-05581-7 ↗
19. A. Goodfellow, E. Galindo-Nava, K. Christofidou, N. Jones, T. Martin, P. Bagot, C. Boyer, M. Hardy, and H. Stone: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 718–28.10.1007/s11661-017-4336-y ↗
20. T. Grosdidier, A. Hazotte, and A. Simon: Scr. Metall. Mater., 1994, vol. 30, pp. 1257–62.10.1016/0956-716X(94)90255-0 ↗
21. N. D’Souza, W. Li, C. Argyrakis, G. West, and C. Slater: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 4205–22.10.1007/s11661-019-05330-w ↗
22. S. Semiatin, N. Levkulich, R. Larsen, J. Tiley, K. Wertz, F. Zhang, T. Smith, H. Dong, P. Gadaud, and J. Cormier: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 3706–26.10.1007/s11661-021-06362-x ↗
23. M. Jackson, M. Starink, and R. Reed: Mater. Sci. Eng. A, 1999, vol. 264, pp. 26–38.10.1016/S0921-5093(98)01120-4 ↗
24. W. Hermann, M. Fahrmann, and H.G. Sockel: in Superalloys 2004. ed. by K. Green, T. Pollock, H. Harada, T. Howson, R. Reed, J. Schirra, W. S, (The Minerals, Metals and Materials Society, Warrendale, PA, 2004), pp. 517–22.10.7449/2004/Superalloys_2004_517_522 ↗
25. I.E. Benrabh, G. Altinkurt, M. Fevre, M. Dehmas, B. Denand, F. Fossard, J.S. Merot, G. Geandier, D. Locq, M. Perrut, in J. Alloys Compd., 2020, vol. 825, p. 15410810.1016/j.jallcom.2020.154108 ↗
26. B. Roebuck, D. Cox, and R. Reed: Scr. Mater., 2001, vol. 44, pp. 917–21.10.1016/S1359-6462(00)00662-X ↗
27. B. Roebuck, D. Cox, and R. Reed: in Superalloys 2004. ed. by K. Green, T. Pollock, H. Harada, T. Howson, R. Reed, J. Schirra, W.S (The Minerals, Metals and Materials Society, Warrendale, PA, 2004), pp. 523–28.10.7449/2004/Superalloys_2004_523_528 ↗
28. G. Sutton, A. Greenhen, B. Roebuck, G. Machin, Meas. Sci. Technol. 30, 044002 (2019)10.1088/1361-6501/ab04ea ↗
29. B. Roebuck, M. Brooks, and A. Pearce: Good Practice Guide for Miniature ETMT Tests, NPL Good Practice Guide No. 137 (NPL, London, 2016).
30. N. D’Souza, B. Roebuck, D. Collins, G. West, and C. Panwisawas: Mater. Sci. Eng. A, 2020, vol. 773, p. 138862.10.1016/j.msea.2019.138862 ↗
31. A. Borgenstam, A. Engstrom, A. Hoglund, and J. Agren: J. Phase Equilibria, 2002, vol. 21, pp. 269–80.10.1361/105497100770340057 ↗
32. H.-J. Jou, P. Voorhees, and G.B. Olson: in Superalloys 2004. ed. by K. Green, T. Pollock, H. Harada, T. Howson, R. Reed, J. Schirra, W. S, (The Minerals, Metals and Materials Society, Warrendale, PA, 2004), pp. 877–86.10.7449/2004/Superalloys_2004_877_886 ↗
33. D. Collins, and H. Stone: Int. J. Plast., 2014, vol. 54, pp. 96–112.10.1016/j.ijplas.2013.08.009 ↗
34. D. Collins, B. Conduit, H. Stone, M. Hardy, G. Conduit, and R. Mitchell: Acta. Mater., 2013, vol. 61, pp. 3378–91.10.1016/j.actamat.2013.02.028 ↗
35. C. Campbell, W. Boettinger, and U. Kattner: Acta. Mater., 2002, vol. 50, pp. 775–92.10.1016/S1359-6454(01)00383-4 ↗
36. N. D’Souza, H. Dong, M. Ardakani, and B. Shollock: Scr. Mater., 2005, vol. 53, pp. 729–33.10.1016/j.scriptamat.2005.05.012 ↗
37. JMatProTM, Ni Module (v 2.20).
38. O. Ojo, N. Richards, and M. Chaturvedi: Scr. Mater., 2004, vol. 50, pp. 641–46.10.1016/j.scriptamat.2003.11.025 ↗
39. O. Ojo, and M. Chaturvedi: Mater. Sci. Eng. A, 2005, vol. 403, pp. 77–86.10.1016/j.msea.2005.04.034 ↗
40. F. Tancret: Comput. Mater. Sci., 2007, vol. 41, pp. 13–19.10.1016/j.commatsci.2007.02.008 ↗
41. M.J. Whelan: Metal. Sci. J. , 1969, vol. 3, pp. 95–97.10.1179/msc.1969.3.1.95 ↗
42. I. Gaal, L. Uray, and T. Vicsek: Phys. Stat. Sol. A, 1975, vol. 31, pp. 755–64.10.1002/pssa.2210310249 ↗
43. V. Divya, R. Munzoz-Moreno, O. Messe, J. Barnard, S. Baker, T. Illston, and H. Stone: Mater. Charact., 2016, vol. 114, pp. 62–74.10.1016/j.matchar.2016.02.004 ↗
44. N. D’Souza: Rolls-Royce Internal Report, 2022.
45. S. Semiatin, M. Obstalecki, E. Payton, A. Pilchak, P. Shade, N. Levkulich, H. Shank, D. Pagan, F. Zhang, and J. Tiley: Metall. Mater. Trans. A , 2019, vol. 50A, pp. 2356–70.10.1007/s11661-019-05164-6 ↗
46. D. Collins, L. Yan, E. Marquis, L. Connor, J. Ciardiello, A. Evans, and H. Stone: Acta Mater. 2013, vol. 61, pp. 7791–7804.10.1016/j.actamat.2013.09.018 ↗
47. C. Campbell: Acta Mater. 2008, vol. 56, pp. 4277–90.10.1016/j.actamat.2008.04.061 ↗
48. T. Ikeda, A. Almazouzi, H. Numakura, M. Koiwa, W. Sprengel, and H. Nakajima: Acta Mater., 1998, vol. 46, pp. 5369–76.10.1016/S1359-6454(98)00209-2 ↗
49. M. Soucail, and Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. 220, pp. 215–22.10.1016/S0921-5093(97)80011-1 ↗
50. M. Hillert, and M. Rettenmayr: Acta Mater., 2003, vol. 51, pp. 2803–09.10.1016/S1359-6454(03)00085-5 ↗
51. D. Collins, N. D’Souza, and C. Panwisawas: Scr. Mater., 2017, vol. 131, pp. 103–07.10.1016/j.scriptamat.2017.01.002 ↗