Effect of Tungsten Content and Compression on Microstructure and Texture Evolution in Liquid Phase Sintered Heavy Alloy
Source abstract
Abstract
The crystallographic texture development in uniaxial compression tests of tungsten heavy alloys was systematically investigated by varying the tungsten content of the alloys. It was observed that the b.c.c. tungsten particles had a characteristic double fiber texture consisting of <111> and <100> fibers, which was irrespective of the alloy composition under consideration. The effect of the composition was shown mainly in relation to the relative proportion of <100> and <111> fiber. It was observed that the <100> fiber strengthens with increasing tungsten content, although the <111> fiber remained as the strongest fiber in all the five compositions considered in the present work. The strengthening of <100> fibers with an increased tungsten content was understood by performing self-consistent texture simulations in combination with a lattice corotation scheme to account for the role of neighboring grain orientations in texture evolution. A physical justification of the role of the neighbors is given by the shift of the orientations around the [110]-[411] divergent line. The random fluctuations that originate from the neighbors displace the orientation from the above of divergent downwards, which in turn leads to the displaced grains rotating in the direction of the <100> corner. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Y. Li, K. Hu, X. Li, X. Ai, and S. Qu: Mater. Sci. Eng. A., 2013, vol. 573, pp. 245–52.10.1016/j.msea.2013.02.069 ↗
2. A. Upadhyaya: Mater. Chem. Phys., 2001, vol. 67, pp. 101–10.10.1016/S0254-0584(00)00426-0 ↗
3. R. Luo, D. Huang, M. Yang, E. Tang, M. Wang, and L. He: Mater. Sci. Eng., A., 2016, vol. 675, pp. 262–70.10.1016/j.msea.2016.08.060 ↗
4. A. Bose, R. Sadangi, and R.M. German: Suppl. Proc., 2012, vol. 1, pp. 453–65.10.1002/9781118356074.ch59 ↗
5. U.R. Kiran, A. Panchal, M. Sankaranarayana, G.V.S.N. Rao, and T.K. Nandy: Mater. Sci. Eng. A., 2015, vol. 640, pp. 82–90.10.1016/j.msea.2015.05.046 ↗
6. U.R. Kiran, A.S. Rao, M. Sankaranarayana, and T.K. Nandy: Int. J. Refract Metal Hard Mater., 2012, vol. 33, pp. 113–21.10.1016/j.ijrmhm.2012.03.003 ↗
7. W.E. Gurwell: Mater. Manuf. Process., 1994, vol. 9, pp. 1115–26.10.1080/10426919408934979 ↗
8. U.R. Kiran, A. Panchal, M. Sankaranarayana, and T.K. Nandy: Int. J. Refract Metal Hard Mater., 2013, vol. 37, pp. 1–11.10.1016/j.ijrmhm.2012.10.002 ↗
9. L. Ding, D.P. Xiang, Y.Y. Li, C. Li, and J.B. Li: Int. J. Refract Metal Hard Mater., 2012, vol. 33, pp. 65–9.10.1016/j.ijrmhm.2012.02.017 ↗
10. A. Mondal, A. Upadhyaya, and D. Agrawal: Int. J. Refract Metal Hard Mater., 2010, vol. 28, pp. 597–600.10.1016/j.ijrmhm.2010.05.002 ↗
11. F. He, J. Yang, T. Lei, and C. Gu: Appl. Surf. Sci., 2007, vol. 253, pp. 7591–8.10.1016/j.apsusc.2007.03.068 ↗
12. C. Li, S. Ma, X. Liu, J. Li, and G. Le: Int. J. Refract Metal Hard Mater., 2018, vol. 77, pp. 113–9.10.1016/j.ijrmhm.2018.08.005 ↗
13. A. Iveković, M.L. Montero-Sistiaga, K. Vanmeensel, J.-P. Kruth, and J. Vleugels: Int. J. Refract Metal Hard Mater., 2019, vol. 82, pp. 23–30.10.1016/j.ijrmhm.2019.03.020 ↗
14. A. Upadhyaya and R.M. German: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 2631–8.10.1007/s11661-998-0235-6 ↗
15. D.-K. Kim, S. Lee, and H. Song: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 1057–69.10.1007/s11661-998-1015-z ↗
16. Z. Wei, J. Yu, S. Hu, and Y. Li: Int. J. Impact Eng., 2000, vol. 24, pp. 747–58.10.1016/S0734-743X(00)00011-7 ↗
17. N.K. Çalişkan, N. Durlu, and Ş Bor: Int. J. Refract Metal Hard Mater., 2013, vol. 36, pp. 260–4.10.1016/j.ijrmhm.2012.10.001 ↗
18. N. Senthilnathan, A.R. Annamalai, and G. Venkatachalam: Mater. Sci. Eng. A., 2018, vol. 710, pp. 66–73.10.1016/j.msea.2017.10.080 ↗
19. S. Yadav and K.T. Ramesh: Mater. Sci. Eng. A., 1995, vol. 203, pp. 140–53.10.1016/0921-5093(95)09865-8 ↗
20. F. Jinglian, G. Xing, Q. Meigui, L. Tao, L. Shukui, and T. Jiamin: Rare Metal Mater. Eng., 2009, vol. 38, pp. 2069–74.10.1016/S1875-5372(10)60061-6 ↗
21. J. Das, G.A. Rao, S.K. Pabi, M. Sankaranarayana, and B. Sarma: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6235–47.10.1016/j.msea.2011.04.067 ↗
22. W.-S. Lee, C.-F. Lin, and S.-T. Chang: J. Mater. Process. Technol., 2000, vol. 100, pp. 123–30.10.1016/S0924-0136(99)00466-5 ↗
23. W.-S. Lee, G.-L. Xiea, and C.-F. Lin: Mater. Sci. Eng. A., 1998, vol. 257, pp. 256–67.10.1016/S0921-5093(98)00852-1 ↗
24. Q. Wei, T. Jiao, K.T. Ramesh, E. Ma, L.J. Kecskes, L. Magness, R. Dowding, V.U. Kazykhanov, and R.Z. Valiev: Acta Mater., 2006, vol. 54, pp. 77–87.
25. Y. Yu, C. Ren, and W. Zhang: Int. J. Refract Metal Hard Mater., 2018, vol. 76, pp. 149–57.10.1016/j.ijrmhm.2018.06.006 ↗
26. Z.-H. Zhang, F.-C. Wang, S.-K. Li, and L. Wang: Mater. Sci. Eng. A., 2006, vol. 435–436, pp. 632–7.10.1016/j.msea.2006.07.134 ↗
27. S. Suwas and R.K. Ray: Crystallographic Texture of Materials, Springer, New York, 2014.10.1007/978-1-4471-6314-5 ↗
28. S. Li and I.J. Beyerlein: Modell. Simul. Mater. Sci. Eng., 2005, vol. 13, p. 509.10.1088/0965-0393/13/4/003 ↗
29. C. Deng, S.F. Liu, J.L. Ji, X.B. Hao, Z.Q. Zhang, and Q. Liu: J. Mater. Process. Technol., 2014, vol. 214, pp. 462–9.10.1016/j.jmatprotec.2013.09.026 ↗
30. E. ASTM: West Conshohocken, PA: ASTM International, 2000, pp. 98–105.
31. F. Bachmann and R. Hielscher: H. Schaeben. Solid State Phenom., 2010, vol. 160, pp. 63–8.10.4028/www.scientific.net/SSP.160.63 ↗
32. C.N. Tomé and R.A. Lebensohn: Los Alamos National Laboratory (USA) and Universidad Nacional de Rosario (Argentina).
33. C.N. Tomé: Modell. Simul. Mater. Sci. Eng., 1999, vol. 7, p. 723.10.1088/0965-0393/7/5/305 ↗
34. J.W. Hutchinson: Proc. R. Soc. Lond. A., 1976, vol. 348, pp. 101–27.10.1098/rspa.1976.0027 ↗
35. R.A. Lebensohn and G.R. Canova: Acta Mater., 1997, vol. 45, pp. 3687–94.10.1016/S1359-6454(97)00067-0 ↗
36. H. Li, F. Larsson, M.H. Colliander, and M. Ekh: Mater. Sci. Eng. A., 2021, vol. 799, p. 140325.10.1016/j.msea.2020.140325 ↗
37. R.A. Lebensohn, P.A. Turner, and G.R. Canova: Comput. Mater. Sci., 1997, vol. 9, pp. 229–36.10.1016/S0927-0256(97)00078-5 ↗
38. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
39. N.P. Gurao and S. Suwas: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 809–27.10.1007/s11661-016-3856-1 ↗
40. C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay: Mater. Sci. Eng. A., 2013, vol. 577, pp. 87–100.10.1016/j.msea.2013.03.079 ↗
41. J.-H. Cho, A.D. Rollett, and K.H. Oh: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 1075–86.10.1007/s11661-004-1010-y ↗
42. P. Gilormini, B. Bacroix, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 231–56.10.1016/0001-6160(88)90001-6 ↗
43. R. Becker: Acta Metall. Mater., 1991, vol. 39, pp. 1211–30.10.1016/0956-7151(91)90209-J ↗
44. C.N. Tomé, C.T. Necker, and R.A. Lebensohn: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 2635–48.10.1007/s11661-002-0385-x ↗
45. R.M. German, P. Suri, and S.J. Park: J. Mater. Sci., 2009, vol. 44, pp. 1–39.10.1007/s10853-008-3008-0 ↗
46. J.M. Rosenberg and H.R. Piehler: Metall. Trans., 1971, vol. 2, pp. 257–9.10.1007/BF02662666 ↗
47. I.L. Dillamore, H. Katoh, and K. Haslam: in Texture, vol. 1, 1970.
48. T.B. Britton and J.L.R. Hickey: in IOP Conference Series: Materials Science and Engineering, vol. 304, 2018, p. 12003.10.1088/1757-899X/304/1/012003 ↗
49. A.M. Korsunsky, K.E. Wells, and P.J. Withers: Scripta Mater., 1998, vol. 39, pp. 1705–12.10.1016/S1359-6462(98)00385-6 ↗
50. E.A. Calnan and C.J.B. Clews: Lond. Edinb. Dublin Philos. Mag. J. Sci., 1951, vol. 42, pp. 616–35.10.1080/14786445108561277 ↗
51. S.-W. Jung, S.-J.L. Kang, D.-K. Kim, S. Lee, and J.-W. Noh: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 2027–35.10.1007/s11661-999-0013-0 ↗