Quantitative Nanostructure and Hardness Evolution in Duplex Stainless Steels: Under Real Low-Temperature Service Conditions
Source abstract
Abstract
Abstract Duplex stainless steels are a group of widely used stainless steels, because of their attractive combination of strength and corrosion resistance. However, these steels embrittle because of a phase separation phenomenon in the ferrite phase when exposed to temperatures within the miscibility gap. This manuscript investigates the phase separation in two commercial stainless steels, the duplex stainless steel (DSS) 22Cr-5Ni (2205 or UNS S32205), and the super-duplex stainless steel (SDSS) 25Cr-7Ni (2507 or UNS S32750), and its subsequent effect on mechanical property evolution. Long-term isothermal aging heat treatments were carried out at industrially relevant temperatures between 250 °C and 350 °C for up to 48,000 hours, and quantitative measurements of the amplitude and wavelength of the phase separated nanostructure were obtained using Small-Angle Neutron Scattering (SANS). These quantifications were used as input parameters in hardness models to predict the hardness evolution. It is concluded that the quantitative information from SANS combined with these hardness models enables the prediction of hardness evolution in DSS at low temperatures, which in turn correlates with the embrittlement of the DSS.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. J. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
2. J. Charles and P. Chemelle.: 8th Duplex Stainl. Steels Conf., 2010, pp. 13–5.
3. G. Chai and P. Stenvall: 8th Eur. Stainl. Steel Duplex Stainl. Steel Conf.
4. J.K. Sahu, U. Krupp, R.N. Ghosh, and H.J. Christ: Mater. Sci. Eng. A., 2009, vol. 508, pp. 1–14.10.1016/j.msea.2009.01.039 ↗
5. S. Kawaguchi, N. Sakamoto, G. Takano, F. Matsuda, Y. Kikuchi, and L. Mráz: Nucl. Eng. Des., 1997, vol. 174, pp. 273–85.10.1016/S0029-5493(97)00126-X ↗
6. A. Weidner, R. Kolmorgen, I.V.O. Kubena, D. Kulawinski, T. Kruml, and H. Biermann: Metall. Mater. Trans. A., 2016, vol. 47, pp. 2112–24.10.1007/s11661-016-3392-z ↗
7. F. Danoix, P. Auger, and D. Blavette: Surf. Sci., 1992, vol. 266, pp. 364–9.10.1016/0039-6028(92)91047-F ↗
8. A. Mateo, L. Llanes, M. Anglada, A. Redjaimia, and G. Metauer: J. Mater. Sci., 1997, vol. 32, pp. 4533–40.10.1023/A:1018669217124 ↗
9. Guttmann M.: Conf. Duplex Stainl. Steels, 1991, pp. 79–92.
10. V. Nordiac: Super Duplex Stainless Steel EN 1.4410 - UNS S32750, .
11. P.A. Korzhavyi, A. V. Ruban, J. Odqvist, J.O. Nilsson, and B. Johansson: Phys. Rev. B Condens. Matter Mater. Phys., 2009, vol. 79, pp. 1–16.10.1103/PhysRevB.79.054202 ↗
12. H.D. Solomon and L.M. Levinson: Acta Metall., 1978, vol. 26, pp. 429–42.10.1016/0001-6160(78)90169-4 ↗
13. W. Xiong, M. Selleby, Q. Chen, J. Odqvist, and Y. Du: Crit. Rev. Solid State Mater. Sci., 2010, vol. 35, pp. 125–52.10.1080/10408431003788472 ↗
14. H.M. Chung and T.R. Leax: Mater. Sci. Technol. (United Kingdom)., 1990, vol. 6, pp. 249–62.10.1179/mst.1990.6.3.249 ↗
15. F. Danoix and P. Auger: Mater. Charact., 2000, vol. 44, pp. 177–201.10.1016/S1044-5803(99)00048-0 ↗
16. J.D. Tucker, G.A. Young Jr., and D.R. Eno: Solid State Phenom., 2011, vol. 172–174, pp. 331–7.10.4028/www.scientific.net/SSP.172-174.331 ↗
17. J.D. Tucker, M.K. Miller, and G.A. Young: Acta Mater., 2015, vol. 87, pp. 15–24.10.1016/j.actamat.2014.12.012 ↗
18. F. Danoix, P. Auger, and D. Blavette: Microsc. Microanal., 2004, vol. 10, pp. 349–54.10.1017/S1431927604040516 ↗
19. K.L. Weng, H.R. Chen, and J.R. Yang: Mater. Sci. Eng. A., 2004, vol. 379, pp. 119–32.10.1016/j.msea.2003.12.051 ↗
20. C. Pareige, S. Novy, S. Saillet, and P. Pareige: J. Nucl. Mater., 2011, vol. 411, pp. 90–6.10.1016/j.jnucmat.2011.01.036 ↗
21. W. Liu, Y. Li, X. Wu, Z. Hou, and K. Hu: J. Mater. Eng. Perform., 2016, vol. 25, pp. 1924–30.10.1007/s11665-016-2022-7 ↗
22. N. Pettersson, S. Wessman, M. Thuvander, P. Hedström, J. Odqvist, R.F.A. Pettersson, and S. Hertzman: Mater. Sci. Eng. A., 2015, vol. 647, pp. 241–8.10.1016/j.msea.2015.09.009 ↗
23. M. Hörnqvist, M. Thuvander, A. Steuwer, S. King, J. Odqvist, and P. Hedström: Appl. Phys. Lett., 2015, vol. 106, pp. 1–5.10.1063/1.4908250 ↗
24. J. Zhou, J. Odqvist, M. Thuvander, and P. Hedström: Microsc. Microanal., 2013, vol. 19, pp. 665–75.10.1017/S1431927613000470 ↗
25. J.E. Westraadt, E.J. Olivier, J.H. Neethling, P. Hedström, J. Odqvist, X. Xu, and A. Steuwer: Mater. Charact., 2015, vol. 109, pp. 216–21.10.1016/j.matchar.2015.10.001 ↗
26. X. Xu, J. Odqvist, M. Colliander, M. Thuvander, A. Steuwer, J.E. Westraadt, S. King, and P. Hedström: Metall. Mater. Trans. A., 2016, vol. 47, pp. 5942–52.10.1007/s11661-016-3800-4 ↗
27. X. Xu, J.E. Westraadt, J. Odqvist, T.G.A. Youngs, S.M. King, and P. Hedström: Acta Mater., 2018, vol. 145, pp. 347–58.10.1016/j.actamat.2017.12.008 ↗
28. J.M. Hyde, M.K. Miller, M.G. Hetherington, A. Cerezo, G.D.W. Smith, and C.M. Elliott: Acta Metall. Mater., 1995, vol. 43, pp. 3415–26.10.1016/0956-7151(95)00042-T ↗
29. M. Furusaka, Y. Ishikawa, S. Yamaguchi, and Y. Funjino: J. Phys. Soc. Jpn., 1986, vol. 55, pp. 2253–69.10.1143/JPSJ.55.2253 ↗
30. H.K. Yuichi Ishikawa, Toshihiko Yoshimura, Atsushi Moriai: Mater. Trans. JIM, 1995, vol. 36, pp. 16–22.10.2320/matertrans1989.36.16 ↗
31. T. Ujihara and K. Osamura: Acta Mater., 2000, vol. 48, pp. 1629–37.10.1016/S1359-6454(99)00441-3 ↗
32. P.J. Grobner: Metall. Trans., 1973, vol. 4, pp. 251–60.10.1007/BF02649625 ↗
33. X. Xu: KTH Royal Institute of Technology, 2017.
34. S. Mburu, R.P. Kolli, D.E. Perea, S.C. Schwarm, A. Eaton, J. Liu, S. Patel, J. Bartrand, and S. Ankem: Mater. Sci. Eng. A., 2017, vol. 690, pp. 365–77.10.1016/j.msea.2017.03.011 ↗
35. Y. Zhao, N. Chawla, T. Jing, A.S.S. Singaravelu, and Q. Zhang: Mater. Sci. Eng. A., 2018, vol. 743, pp. 520–8.
36. Y. Das, J. Liu, S. Wessman, X. Xu, J. Odqvist, S. King, and P. Hedström: Materialia, 2020, vol. 12, p. 100771.10.1016/j.mtla.2020.100771 ↗
37. T.G. Lach, W.E. Frazier, J. Wang, A. Devaraj, and T.S. Byun: Acta Mater., 2020, vol. 196, pp. 456–69.10.1016/j.actamat.2020.05.017 ↗
38. SVENSK STANDARD: Metallic Materials – Charpy Pendulum Impact Test – Part 3: Preparation and Characterization of Charpy V-Notch Test Pieces for Indirect Verification of Pendulum Impact Machines (SS-EN ISO 148-3:2008), Sweden, 2008.
39. R.K. Heenan, J. Penfold, and S.M. King: J. Appl. Crystallogr., 1997, vol. 30, pp. 1140–7.10.1107/S0021889897002173 ↗
40. X. Xu, J. Odqvist, S.M. King, D.A. Venero, and P. Hedström: Mater. Charact., 2020, vol. 164, p. 110347.10.1016/j.matchar.2020.110347 ↗
41. O. Arnold, J.C. Bilheux, J.M. Borreguero, A. Buts, S.I. Campbell, L. Chapon, M. Doucet, N. Draper, R. Ferraz Leal, M.A. Gigg, V.E. Lynch, A. Markvardsen, D.J. Mikkelson, R.L. Mikkelson, R. Miller, K. Palmen, P. Parker, G. Passos, T.G. Perring, P.F. Peterson, S. Ren, M.A. Reuter, A.T. Savici, J.W. Taylor, R.J. Taylor, R. Tolchenov, W. Zhou, and J. Zikovsky: Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip., 2014, vol. 764, pp. 156–66.10.1016/j.nima.2014.07.029 ↗
42. M. Project: Mantid Project Version 4.2, https://www.mantidproject.org/Main_Page, (accessed 13 January 2020).
43. G.D. Wignall and F.S. Bates: J. Appl. Crystallogr., 1987, vol. 20, pp. 28–40.10.1107/S0021889887087181 ↗
44. X. Xu, S. Wessman, J. Odqvist, S.M. King, and P. Hedström: Mater. Sci. Eng. A., 2019, vol. 754, pp. 512–20.10.1016/j.msea.2019.03.046 ↗
45. X. Xu, J. Odqvist, S.M. King, D. Alba Venero, and P. Hedström: Mater. Charact., 2020, vol. 164, p. 110347.10.1016/j.matchar.2020.110347 ↗
46. http://www.sasview.org.
47. B. Hammouda: Probing Nanoscale Structures - The SANS Toolbox, 2016.
48. H. Furukawa: Phys. A Stat. Mech. Appl., 1984, vol. 123, pp. 497–515.10.1016/0378-4371(84)90168-7 ↗
49. X. Xu, J. Odqvist, M.H. Colliander, S. King, M. Thuvander, A. Steuwer, and P. Hedström: Acta Mater., 2017, vol. 134, pp. 221–9.10.1016/j.actamat.2017.06.001 ↗
50. D.L. Price and F. Fernandez-Alonso: in Experimental Methods in the Physical Sciences, vol. 44, 1st edn., Elsevier Inc., 2013, pp. 1–136.10.1016/B978-0-12-398374-9.00001-2 ↗
51. T. Hashimoto, M. Takenaka, and H. Jinnai: J. Appl. Crystallogr., 1991, vol. 24, pp. 457–66.10.1107/S0021889891000444 ↗
52. H. Meier and G.R. Strobl: Macromolecules., 1987, vol. 20, pp. 649–54.10.1021/ma00169a029 ↗
53. S.K. Sarkar, D. Shinde, A. Das, D. Ray, D. Sen, and A. Biswas: SSRN Electron. J., 2020, pp. 0–51.
54. Y.H. Yao, J.F. Wei, and Z.P. Wang: Mater. Sci. Eng. A., 2012, vol. 551, pp. 116–21.10.1016/j.msea.2012.04.105 ↗
55. J.E. Brown and G.D.W. Smith: Surf. Sci., 1991, vol. 246, pp. 285–91.10.1016/0039-6028(91)90428-U ↗
56. J.C. Lasalle and L.H. Schwartz: Acta Metall., 1986, vol. 34, pp. 989–1000.10.1016/0001-6160(86)90208-7 ↗
57. J. Zhou, J. Odqvist, L. Höglund, M. Thuvander, T. Barkar, and P. Hedström: Scr. Mater., 2014, vol. 75, pp. 62–5.10.1016/j.scriptamat.2013.11.020 ↗
58. E.L. Huston, J.W. Cahn, and J.E. Hilliard: Acta Metall., 1966, vol. 14, pp. 1053–62.10.1016/0001-6160(66)90193-3 ↗
59. C. Lemoine, A. Fnidiki, J. Teillet, M. He, and F. Danoix: Scr. Mater., 1998, vol. 39, pp. 61–6.10.1016/S1359-6462(98)00133-X ↗
60. I. Mirebeau and G. Parette: Phys. Rev. B, 2010, vol. 82, p. 104203.10.1103/PhysRevB.82.104203 ↗
61. I. Mirebeau, M. Hennion, and G. Parette: Phys. Rev. Lett., 1984, vol. 53, pp. 687–90.10.1103/PhysRevLett.53.687 ↗
62. J. Zhou, J. Odqvist, J. Ågren, A. Ruban, M. Thuvander, W. Xiong, G.B. Olson, and P. Hedström: Scr. Mater., 2015, vol. 98, pp. 13–5.10.1016/j.scriptamat.2014.10.035 ↗
63. J.W. Cahn: Acta Metall., 1963, vol. 11, pp. 1275–82.10.1016/0001-6160(63)90090-7 ↗
64. R. Wagner: Czechoslov. J. Phys. B., 1981, vol. 31, pp. 198–208.
65. M. Kato: Acta Metall., 1981, vol. 29, pp. 79–87.10.1016/0001-6160(81)90088-2 ↗
66. A.J. Ardell: Metall. Trans. A., 1985, vol. 16, pp. 2131–65.10.1007/BF02670416 ↗
67. M. Kato, T. Mori, and L.H. Schwartz: Acta Metall., 1980, vol. 28, pp. 285–90.10.1016/0001-6160(80)90163-7 ↗
68. E.J. Pavlina and C.J. Van Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888–93.10.1007/s11665-008-9225-5 ↗
69. J.M. Rosenberg and H.R. Piehler: Metall. Trans., 1971, vol. 2, pp. 257–9.10.1007/BF02662666 ↗
70. M. Hättestrand, P. Larsson, G. Chai, J.O. Nilsson, and J. Odqvist: Mater. Sci. Eng. A., 2009, vol. 499, pp. 489–92.10.1016/j.msea.2008.09.021 ↗
71. S. Mahajan, S. Jin, and D. Brasen: Acta Metall., 1980, vol. 28, pp. 971–7.10.1016/0001-6160(80)90115-7 ↗
72. Z. Zhang, Z. Zeng, S.X. Mao, J. Wang, C.R. Weinberger, and T. Zhu: Nat. Mater., 2015, vol. 14, pp. 594–600.10.1038/nmat4228 ↗
73. M.K. Miller and K.F. Russell: Appl. Surf. Sci., 1996, vol. 94–95, pp. 398–402.10.1016/0169-4332(95)00403-3 ↗
74. M.B. Cortie and H. Pollak: Mater. Sci. Eng. A., 1995, vol. 199, pp. 153–63.10.1016/0921-5093(94)09731-3 ↗
75. M.J. Marcinkowski, R.M. Fisher, and A. Szirmae: Trans. Metall. Soc. AIME., 1964, vol. 230, pp. 676–89.
76. J. Chaussidon, M. Fivel, and D. Rodney: Acta Mater., 2006, vol. 54, pp. 3407–16.10.1016/j.actamat.2006.03.044 ↗
77. S. Narayanan, D.L. McDowell, and T. Zhu: J. Mech. Phys. Solids., 2014, vol. 65, pp. 54–68.10.1016/j.jmps.2014.01.004 ↗
78. D.A. Terentyev, G. Bonny, and L. Malerba: Acta Mater., 2008, vol. 56, pp. 3229–35.10.1016/j.actamat.2008.03.004 ↗
79. N. Narita: Bull. Japan Inst. Met., 2011, vol. 24, pp. 984–92.10.2320/materia1962.24.984 ↗
80. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
81. G. Chai and P. Stenvall: 13th Int. Conf. Fract., 2013, pp. 1–10.
82. J. Pilhagen and R. Sandström: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 1327–37.10.1007/s11661-013-2055-6 ↗
83. J. Pilhagen and R. Sandström: Eng. Fract. Mech., 2013, vol. 99, pp. 239–50.10.1016/j.engfracmech.2013.01.002 ↗