journal article·2021-12

Investigating the Structure, Microstructure, and Texture in Selective Laser-Melted Sterling Silver 925

R. J. Vikram, L. Kollo, K. G. Prashanth, Satyam Suwas

Publisher page

Abstract

The evolution of microstructure and texture during selective laser melting (SLM) of silver alloy—sterling silver 925 (AM Ag925) has been investigated and analyzed vis-a-vis cast sterling silver (AC Ag925). The microstructure of AM Ag925 was characterized by a single-phase silver-rich face-centered cubic solid solution with dendritic morphology, along with some locally distributed micro-segregated copper–germanium (Cu–Ge)-rich regions. Each adjacent dendritic feature consists of Ag–Cu-rich and Ag–Ge-rich regions and appears as alternate dark and bright regions. On the other hand, the as-cast AC Ag925 microstructure comprises Ag and Cu phases. Specific heat treatment was employed, which led to an equiaxed microstructure in AM Ag925 with Cu distributing along grain boundaries while the microstructure of AC Ag925 had Cu precipitates inside the matrix. Bulk texture studies revealed that the solidified textures were very weak for AM Ag925, and a random texture is observed. On the other hand, for the AC Ag925 specimens, a typical fiber texture is observed. Both AC Ag925 and AM Ag925 showed significant deviation from $$\left\langle {100} \right\rangle$$ solidification texture and influences the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. E. Nisaratanaporn, S. Wongsriruksa, S. Pongsukitwat, and G. Lothongkum: Mater. Sci. Eng. A., 2007, vol. 445–446, pp. 663–8.10.1016/j.msea.2006.09.106 ↗
2. T. Chairuangsri and E. Nisaratanaporn: Chiang Mai J. Sci., 2010, vol. 37, pp. 260–8.
3. S. Sakultanchareonchai, T. Chairuangsri, and E. Nisaratanaporn: Chiang Mai J. Sci., 2016, vol. 43, pp. 206–14.
4. H. Ruan, F. Huang, M. Zhong, B. Wu, H. Tang, and W. Luo: Key Eng. Mater., 2018, vol. 775, pp. 506–13.10.4028/www.scientific.net/KEM.775.506 ↗
5. S. Greil, C. Edtmaier, R. Haubner, and L. Lauter: Mater. Sci. Forum., 2017, vol. 891, pp. 89–94.10.4028/www.scientific.net/MSF.891.89 ↗
6. N. Chomsaeng and N. Poolthong: Chiang Mai Univ. J Nat. Sci., 2017, vol. 16, pp. 255–62.
7. S.P. Gupta: Can. Metall. Q., 1998, vol. 37, pp. 141–59.10.1179/cmq.1998.37.2.141 ↗
8. H.J. Seol, Y.G. Park, H.K. Yong, Y. Takada, and H. IlKim: J. Mater. Sci. Mater. Med., 2005, vol. 16, pp. 977–83.10.1007/s10856-005-4752-1 ↗
9. F.W. Jones, C.M. Lee, and C. Skyes: Proc. R. Soc. Lond. Ser. A., 1942, vol. 181, pp. 154–68.10.1098/rspa.1942.0068 ↗
10. S.B. Youssef: Physica B., 1996, vol. 228, pp. 337–41.10.1016/S0921-4526(96)00497-8 ↗
11. A. Norbury: J. Inst. Met., 1928, vol. 39, pp. 145–72.
12. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
13. K. Prashanth, L. Löber, H.-J. Klauss, U. Kühn, and J. Eckert: Technologies., 2016, vol. 4, p. 34.10.3390/technologies4040034 ↗
14. K.G. Prashanth, S. Kolla, and J. Eckert: Materials., 2017, vol. 10, pp. 1–12.
15. F. Cooper: Prog. Addit. Manuf., 2016, vol. 1, pp. 29–43.10.1007/s40964-015-0003-2 ↗
16. K.G. Prashanth, S. Scudino, H.J. Klauss, K.B. Surreddi, L. Löber, Z. Wang, A.K. Chaubey, U. Kühn, and J. Eckert: Mater. Sci. Eng. A., 2014, vol. 590, pp. 153–60.10.1016/j.msea.2013.10.023 ↗
17. S. Scudino, C. Unterdörfer, K.G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, and J. Eckert: Mater. Lett., 2015, vol. 156, pp. 202–4.10.1016/j.matlet.2015.05.076 ↗
18. Z. Wang, M. Xie, Y. Li, W. Zhang, C. Yang, L. Kollo, J. Eckert, and K.G. Prashanth: NPG Asia Mater., 2020, vol. 12, pp. 1–10.10.1038/s41427-019-0187-x ↗
19. P. Wang, C. Gammer, F. Brenne, K.G. Prashanth, R.G. Mendes, M.H. Rümmeli, T. Gemming, J. Eckert, and S. Scudino: Mater. Sci. Eng. A., 2018, vol. 711, pp. 562–70.10.1016/j.msea.2017.11.063 ↗
20. M. Shunmugavel, A. Polishetty, and G. Littlefair: Procedia Technol., 2015, vol. 20, pp. 231–6.10.1016/j.protcy.2015.07.037 ↗
21. K.G. Prashanth, B. Debalina, Z. Wang, P.F. Gostin, A. Gebert, M. Calin, U. Kühn, M. Kamaraj, S. Scudino, and J. Eckert: J. Mater. Res., 2014, vol. 29, pp. 2044–54.10.1557/jmr.2014.133 ↗
22. N. Singh, P. Hameed, R. Ummethala, G. Manivasagam, K.G. Prashanth, and J. Eckert: Mater. Today Adv., 2020, vol. 8, p. 100097.10.1016/j.mtadv.2020.100097 ↗
23. Y.L. Yap and W.Y. Yeong: Virtual Phys. Prototyp., 2014, vol. 9, pp. 195–201.10.1080/17452759.2014.938993 ↗
24. M. Khan and P. Dickens: Rapid Prototyp. J., 2012, vol. 18, pp. 81–94.10.1108/13552541211193520 ↗
25. M. Khan and P. Dickens: Gold Bull., 2010, vol. 43, pp. 114–21.10.1007/BF03214976 ↗
26. K.G. Prashanth, H. ShakurShahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, and S. Scudino: Addit. Manuf., 2015, vol. 6, pp. 1–5.
27. K.G. Prashanth, S. Scudino, and J. Eckert: Acta Mater., 2017, vol. 126, pp. 25–35.10.1016/j.actamat.2016.12.044 ↗
28. Y. Wang, J. Ghanbaja, P. Boulet, D. Horwat, and J.F. Pierson: Acta Mater., 2019, vol. 164, pp. 648–53.10.1016/j.actamat.2018.11.018 ↗
29. M. Arzaghi, J.J. Fundenberger, L.S. Toth, R. Arruffat, L. Faure, B. Beausir and X. Sauvage: Acta Mater, 2012, vol. 60, pp. 4393–0810.1016/j.actamat.2012.04.035 ↗
30. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5, pp. 1–7.
31. K.G. Prashanth, S. Scudino, T. Maity, J. Das, and J. Eckert: Mater. Res. Lett., 2017, vol. 5, pp. 386–90.10.1080/21663831.2017.1299808 ↗
32. L. Thijs, F. Verhaeghe, T. Craeghs, J. Van Humbeeck, and J.P. Kruth: Acta Mater., 2010, vol. 58, pp. 3303–12.10.1016/j.actamat.2010.02.004 ↗
33. T. Maity, N. Chawake, J.T. Kim, J. Eckert, and K.G. Prashanth: Manuf. Lett., 2018, vol. 15, pp. 33–7.10.1016/j.mfglet.2018.02.012 ↗
34. W.H. Hall: Proc. Phys. Soc. A., 1949, vol. 62, pp. 741–3.10.1088/0370-1298/62/11/110 ↗
35. S. Sarkar and R. Das: Micro Nano Lett., 2018, vol. 13, pp. 312–5.10.1049/mnl.2017.0349 ↗
36. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–8.10.4028/www.scientific.net/SSP.160.63 ↗
37. S. Pauly, P. Wang, U. Kühn, and K. Kosiba: Addit. Manuf., 2018, vol. 22, pp. 753–7.
38. S. Pauly, L. Löber, R. Petters, M. Stoica, S. Scudino, U. Kühn, and J. Eckert: Mater. Today., 2013, vol. 16, pp. 37–41.10.1016/j.mattod.2013.01.018 ↗
39. R.J. Vikram, B.S. Murty, D. Fabijanic, and S. Suwas: J. Alloy. Compd., 2020, vol. 827, p. 154034.10.1016/j.jallcom.2020.154034 ↗
40. R. Mehrabian: Proc. Third Conf. Rapid Solidif. Process,1982, pp. 712.
41. W.J. Boettinger, J.W. Cahns, R. Cortell, R. Manning. Application of Solidification Theory to Rapid Solidification Processing, 1983 vol. 46.10.21236/ADA134132 ↗
42. W.J. Boettinger: Mater. Sci. Eng., 1988, vol. 98, pp. 123–30.10.1016/0025-5416(88)90140-1 ↗
43. M. AsleZaeem and A.J. Clarke: JOM., 2016, vol. 68, pp. 928–9.10.1007/s11837-016-1814-4 ↗
44. V. Manvatkar, A. De, and T. DebRoy: Mater. Sci. Technol., 2015, vol. 31, pp. 924–30.10.1179/1743284714Y.0000000701 ↗
45. S.M. Copley, J.A. Todd, M. Yankova, and E.Y. Yankov: Surf. Treat. Film Depos., 1996, vol. 307, pp. 93–119.
46. W.A. Elliott, F.P. Gagliano, and G. Krauss: Mach. Des., 1973, vol. 4, pp. 2031–7.
47. K.G. Prashanth and J. Eckert: J. Alloy. Compd., 2017, vol. 707, pp. 27–34.10.1016/j.jallcom.2016.12.209 ↗
48. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444–51.10.1063/1.1713333 ↗
49. N.P. Gurao: SAE International, 2014.
50. S. Suwas Ranjit Kumar Ray: Springer, London, 2016.