journal article·2021-07

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

Xin Li, Xiao-Guang Zhou, Guang-Ming Cao, Shao-Hua Xu, Yong Wang, Zhen-Yu Liu

Publisher page

Abstract

In the present paper, a novel method was developed to predict the dynamic recrystallization (DRX) behavior during hot rolling based on machine learning in combination with physical models of niobium (Nb) micro-alloyed steels. It has been demonstrated that the comprehensive modeling could accurately predict the DRX behavior under different compositional and processing conditions, which not only exhibited higher precisions but also was in better agreement with physical metallurgical principles than traditional methods.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. M.S. Mohebbi, M. Rezayat, M.H. Parsa, S. Nagy, and M. Nosko: Mater. Sci. Eng. A, 2018, vol. 723, pp. 194-203.10.1016/j.msea.2018.03.054 ↗
2. C.A. Hernandez, S.F. Medina, and J. Ruiz: Acta Mater., 1996, vol. 44, pp. 155-163.10.1016/1359-6454(95)00153-4 ↗
3. A. Yoshie, T. Fujita, M. Fujioka, K. Okamo and H. Morikaw: ISIJ Int., 1996, vol. 36, pp. 467-473.10.2355/isijinternational.36.467 ↗
4. Z.Y. Liu, G.D. Wang and W. Gao: J. Mater. Process. Tech., 1996, vol. 57, pp. 332-336.10.1016/0924-0136(95)02089-6 ↗
5. Y.T. Zhou, Y.F. Xia, L. Jiang, S. Long, and D. Yang: High Temp. Mater. Proc. 2018, vol. 37, pp. 551-562.10.1515/htmp-2016-0251 ↗
6. S. F. Medina and C. A. Hernandez: Acta Mater., 1996, vol. 44, pp. 165-171.10.1016/1359-6454(95)00154-6 ↗
7. L. Chen, W. Y. Sun, J. Lin, G. Q. Zhao, and G. C. Wang: Results in Phys., 2019, vol. 12, pp. 784-792.10.1016/j.rinp.2018.12.046 ↗
8. Y. W. Xu, D. Tang, Y. Song, and X. G. Pan: Mater. Design, 2012, vol. 39, pp. 168-174.10.1016/j.matdes.2012.02.034 ↗
9. Y. G. Liu, M. Q. Li, and J. Luo: Mater. Sci. Eng. A, 2013, vol. 574, pp. 1-8.10.1016/j.msea.2013.03.011 ↗
10. S.W. Wu, X.G. Zhou, G.M. Cao, Z.Y. Liu, and G.D. Wang: Mater. Design, 2017, vol. 116, pp. 676-685.10.1016/j.matdes.2016.12.058 ↗
11. C. Shen, C. Wang, X. Wei, Y. Li, S. van der Zwaag, and W. Xu: Acta Mater., 2019, vol. 179, pp. 201-214.10.1016/j.actamat.2019.08.033 ↗
12. Z. Wang, L. Zhang, W. Li, Z. Qin, Z. Wang, Z. Li, L. Tan, L. Zhu, F. Liu, H. Han, and L. Jiang: Scripta Mater., 2020, vol. 178, pp. 134-138.10.1016/j.scriptamat.2019.11.019 ↗
13. E. Menou, F. Tancret, I. Toda-Caraballo, G. Ramstein, P. Castany, E. Bertrand, N. Gautier, and P.E.J. Rivera Díaz-Del-Castillo: Scripta Mater., 2018, vol. 156, pp. 120–23.10.1016/j.scriptamat.2018.07.024 ↗
14. C. Wang, H. Fu, L. Jiang, D. Xue, and J. Xie: npj Compu. Mater., 2019, vol. 5, pp. 1-8.
15. T. Bhattacharyya, S.B. Singh, S. Sikdar (Dey), S. Bhattacharyya, W. Bleck, and D. Bhattacharjee: Mater. Sci. Eng. A, 2013, vol. 565, pp. 148–57.10.1016/j.msea.2012.11.110 ↗
16. H. Abarghooei, H. Arabi, S.H. Seyedein, and B. Mirzakhani: Appl. Soft Comput., 2017, vol. 52, pp. 471-477.10.1016/j.asoc.2016.10.021 ↗
17. S. Kumar, S. Kumar, Prakash, R. Shankar, M. K. Tiwari, and S. B. Kumar: Expert. Syst. Appl., 2007, vol. 32, pp. 777–88.10.1016/j.eswa.2006.01.041 ↗
18. G. Z. Quan, J. T. Liang, W. Q. Lv, D. S. Wu, Y. Y. Liu, G. C. Luo, and J. Zhou: Mater. Res., 2014, vol. 17, pp. 1102-1114.10.1590/1516-1439.211713 ↗
19. G. Z. Quan, W. Q. Lv, Y. P. Mao, Y. W. Zhang, and J. Zhou: Mater. Design, 2013, vol. 50, pp. 51-61.10.1016/j.matdes.2013.02.033 ↗
20. G. Z. Quan, S. A. Pu, Z. Y. Zhan, Z. Y. Zou, Y. Y. Liu, and Y. F. Xia: Int. J. Precis. Eng. Man., 2015, vol. 16, pp. 2129-2137.10.1007/s12541-015-0275-y ↗
21. H. Mirzadeh: Mech. Mater., 2015, vol. 85, pp. 66-79.10.1016/j.mechmat.2015.02.014 ↗
22. Y. Liu, Y. K. Zhu, C. Geng, and J. R. Xu: Int. J. Mater. Res., 2016, vol. 107, pp. 659-667.10.3139/146.111388 ↗
23. A. Cingara: J. Mater. Process. Tech., 1992, vol. 36, pp. 31-42.10.1016/0924-0136(92)90236-L ↗
24. R. Ebrahimi, S.H. Zahiri, and A. Najafizadeh: J. Mater. Process. Tech., 2006, vol. 171, pp. 301-305.10.1016/j.jmatprotec.2005.06.072 ↗
25. M. Shaban and B. Eghbali: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4320-4325.10.1016/j.msea.2010.03.086 ↗
26. J. H. Holland: Adaptation in natural and artificial systems, Cambridge, MIT Press, 1992, vol. 6, pp.126-137.
27. M.J. Faizabadi, G. Khalaj, H. Pouraliakbar, and M.R. Jandaghi: Neural Comput. Appl., 2014, vol. 25, pp. 1993-1999.10.1007/s00521-014-1687-9 ↗
28. G. Khalaj, A. Nazari, H. Yoozbashizadeh, A. Khodabandeh, and M. Jahazi: Neural Comput. Appl., 2012, vol. 24, pp. 301-308.10.1007/s00521-012-1233-6 ↗
29. P. Fabregue: New York, unpublished research, 1994.
30. R.C. Wan and M. Yu: Hot Working Tech., 2015, vol. 44, pp. 115-118.
31. A.I. Fernández, P. Uranga, B. López and J.M. Rodriguez-Ibabe: Mater. Sci. Eng. A, 2003, vol. 361, pp. 367-376.10.1016/S0921-5093(03)00562-8 ↗
32. S.H. Xu: Effect of ultra fast cooling on Microstructure and properties of 315MPa ship plate steel, Northeastern University, Shenyang, 2013, pp. 15-27.
33. H. Mirzadeh and A. Najafizadeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1160-1164.10.1016/j.msea.2009.09.060 ↗
34. S. I. Kim, Y. Lee and S. M. Byon: J. Mater. Process. Tech., 2003, vol. 140, pp. 84-89.10.1016/S0924-0136(03)00742-8 ↗
35. Z. S. Motlagh, B. Tolaminejad and A. Momeni: Met. Mater. Int., 2020, pp. 1–18.
36. J. Yang, G. Xu, B. Han, C.H. Bu and H. Zou: Journal of Wuhan University of Science and Technology, 2012, vol. 35, pp. 85–89.
37. L.Q. Ma, Z.Y. Liu, S.H. Jiao, X.Q. Yuan, and D. Wu: J. Iron Steel Res. Int., 2008, vol. 15, pp. 31-36.10.1016/S1006-706X(08)60121-1 ↗
38. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789-798.10.1016/0001-6160(62)90092-5 ↗
39. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033-1043.10.1016/0001-6160(69)90049-2 ↗
40. D. G. Cram, X. Y. Fang, H. S. Zurob, Y. J. M. Bréchet, and C. R. Hutchinson: Acta Mater., 2012, vol. 60, pp. 6390-6404.10.1016/j.actamat.2012.08.021 ↗
41. L.M. Fu, A.D. Shan and W. Wang: Acta Metall. Sin., 2010, vol. 46, pp. 832-837.10.3724/SP.J.1037.2010.00832 ↗
42. K. Minami, F. Siciliano Jr., T. M. Maccagno, and J. J. Jonas: ISIJ Int., 1996, vol. 36, pp. 1507-1515.10.2355/isijinternational.36.1507 ↗
43. Q.M. Wang, Z.G. Zhang and S.P. Tian: Mater. Heat Treat., 2009, vol. 38, pp. 52-55.
44. C.L. Miao, G.D. Zhang and C.J. Shang: Mater. Sci. Forum, 2010, vol. 654-656, pp. 62-65.10.4028/www.scientific.net/MSF.654-656.62 ↗
45. Z. Zheng, D. Zhao and W.T. Yu: Welded pipe, 2008, vol. 31, pp. 54-58.
46. X.G. Zhou: Research on Prediction of Microstructure and Mechanical Properties of Hot Rolled Nb Bearing Steels in FTSR, Northeastern University, Shenyang, 2007, pp. 40-45.
47. L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao, and L.X. Du: J. Iron Steel Res. Int., 2011, vol. 18, pp. 55-60.10.1016/S1006-706X(11)60011-3 ↗
48. M. Shaban and B. Eghbali: J. Mater. Sci. Technol., 2011, vol. 27, pp. 359-363.10.1016/S1005-0302(11)60074-1 ↗
49. C.M. Sellars: Physical metallurgy of hot working. In Hot Working and Forming Processes, Met Soc: Sheffield, 1980, pp. 3-15.
50. S.I. Kim and Y.C. Yoo: Mater. Sci. Eng. A, 2001, vol. 311, pp. 108–113.10.1016/S0921-5093(01)00917-0 ↗
51. Z.X. Li, C.X. Wang, X.M. Liu, and J.Z. Xiang: Mater. Heat Treat., 2012, vol. 41, pp. 111-115.
52. D.C. Wan, Q.W. Cai, W. Yu, C.Z. Dong and Z.M. Zhang: Heat Treat. Metals, 2013, vol. 38, pp. 12-15.
53. L.J. Cuddy and J.C. Raley: Metall. Trans. A., 1983, vol. 14A, pp. 1989-1995.10.1007/BF02662366 ↗
54. C.S. Xie, H.B. Pan, J.Yan, J. Zhang, T.R. Yu and Z. Guo: Heat Treat. Metals, 2016, vol. 41, pp. 63-68.
55. P. A. Manohar, D. P. Dunne, T. Chandar, and C.R. Killmore: ISIJ Int., 1996, vol. 36, pp. 194-200.10.2355/isijinternational.36.194 ↗
56. A. Karmakar, S. Kundu, S. Roy, S. Neogy, D. Srivastava and D. Chakrabarti: Mater Sci Tech., 2013, vol. 30, pp. 653-664.10.1179/1743284713Y.0000000386 ↗
57. W.Z. Li, L. Huang, P.R. Yan, H.X. Ma and Z.F. Pang: Heat Treat. Metals, 2013, vol. 38, pp. 19-22.
58. H.J. Cheng, F.M. Wang, C.R. Li, and G.Q. Xu: Heat Treat. Metal., 2009, vol. 34, pp. 5-10.
59. X.X. An, Y. Tian, H.J. Wang, Y.F. Shen and Z.D. Wang: Adv. Eng. Mater., 2019, vol. 21, pp. 1900132-1900142.10.1002/adem.201900132 ↗