journal article·2021-07

Austenite Grain Refinement and Subsequent Martensite Transformation of Ternary Cu–Al–Ni Alloy Solidified Within Ultrasonic Field

Y. J. Hu, X. Wang, J. Y. Wang, W. Zhai, B. Wei

Publisher page

Abstract

A power ultrasound with different amplitudes was applied during the solidification of ternary Cu-14wt pct Al-4.5 wt pct Ni alloy, which was then quenched to obtain martensite phases. It effectively promoted the nucleation of primary austenite β (AlCu3) phase, thereby reducing its grain size by almost one order of magnitude. This refined austenite structure induced by ultrasound also had influence on the martensite transformation during subsequent quenching. In the coarse β grain formed without ultrasound, only very little amount of β 1 ′ martensite phase with 18R structure existed and part of it consisted in the coarse γ 1 ′ martensite phase with 2H structure. As ultrasound amplitude rose up, the martensite phases were both refined and the relative content of β 1 ′ phase increased. This microstructure modification led to the enhancement of mechanical properties of Cu-14 pct Al-4.5 pct Ni alloy as well. The yield strength of the quenched alloy solidified at the maximal ultrasonic amplitude was 1.5 times higher than that without ultrasound. The microhardness and the storage modulus were also enhanced with the increase of ultrasound amplitude.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. [1] J. M. Jani, M. Leary, A. Subic and M. A. Gibson: Mater. Des. 2014, vol. 56, pp. 1078-1113.10.1016/j.matdes.2013.11.084 ↗
2. V. E. A. Araujo, R. Gastien, E. Zelaya, J. I. Beiroa, I. Corro, M. Sade and F. C. Lovey: J. Alloys Compd., 2015, vol. 641, pp. 155-161.10.1016/j.jallcom.2015.04.065 ↗
3. [3] K. Akash, A. K. Jain, G. Karmarkar, A. Jadhav, D. C. Narayane, N. Patra and I. A. Palani: Mater. Des., 2018, vol. 144, pp. 64-71.10.1016/j.matdes.2018.02.013 ↗
4. R. D. Dar, H. Yan and Y. Chen: Scr. Mater., 2016, vol. 115, pp. 113-117.10.1016/j.scriptamat.2016.01.014 ↗
5. K. Akash, A. K. Shukla, S. M. Prabu, D. C. Narayane, S. Kanmanisubbu and I. A. Palani: J. Alloys Compd., 2017, vol. 720, pp. 264-271.10.1016/j.jallcom.2017.05.255 ↗
6. F. D. O. Braga, A. N. Matlakhov, L. A. Matlakhova, S. N. Monteiro and C. J. D. Araújo: Mater. Res., 2017, vol. 20(6), pp. 1579-1592.10.1590/1980-5373-mr-2016-0476 ↗
7. M. K. Abbass, M. M. Radhi and R. S. A. Adnan: Mater. Today Proc., 2017, vol. 4(2), pp. 224-233.
8. S. K. Vajpai, R. K. Dube and S. Sangal: Mater. Sci. Eng. A, 2013, vol. 570, pp. 32-42.10.1016/j.msea.2013.01.063 ↗
9. M. R. da Silva, P. Gargarella, T. Gustmann, W. J. BottaFilho, C. S. Kiminami, J. Eckert and C. Bolfarini: Mater. Sci. Eng. A, 2016, vol. 661, pp. 61-67.10.1016/j.msea.2016.03.021 ↗
10. P. LaRoca, L. Isola, P. Vermaut and J. Malarría: Scr. Mater., 2017, vol. 135, pp. 5-9.10.1016/j.scriptamat.2017.03.016 ↗
11. J. M. Liu, W. Zhai, B. J. Wang, X. Ma, P. X. Yan and B. Wei: J. Alloys Compd., 2020, vol. 827, p. 154297.10.1016/j.jallcom.2020.154297 ↗
12. G. Wang, Q. Wang, N. Balasubramani, M. Qian, D. G. Eskin, M. S. Dargusch and D. H. StJohn: Metall. Mater. Trans. A, 2019, vol. 50(11), pp. 5253-5263.10.1007/s11661-019-05448-x ↗
13. S. D. Brass, K. R. Ravi, J. Nampoothiri, K. M. Saradesh, T. Rajasekaran and G. S. Vinodkumar: Metall. Mater. Trans. B, 2019, vol. 50(6), pp. 2557-2565.
14. X. Fang, S. Wu, S. Lü, J. Wang and X. Yang: Mater. Sci. Eng. A, 2017, vol. 679, pp. 372-378.10.1016/j.msea.2016.10.035 ↗
15. C. T. W. Proni, G. L. Brollo and E. J. Zoqui: Metall. Mater. Trans. B, 2019, vol. 51(1), pp. 306-317.10.1007/s11663-019-01741-7 ↗
16. [16] R. Chen, D. Zheng, T. Ma, H. Ding, Y. Su, J. Guo and H. Fu: Ultrason. Sonochem., 2017, vol. 38, pp. 120-133.10.1016/j.ultsonch.2017.03.006 ↗
17. [17] P Villars, A Prince, H Okamoto. Handbook of ternary alloy phase diagrams. Materials Park, OH: ASM international, 1995.
18. A. Agrawal and R. K. Dube. J. Alloys Compd., 2018, vol. 750, pp. 235-247.10.1016/j.jallcom.2018.03.390 ↗
19. [19] E.B. Flint and K.S. Suslick: Science, 1991, vol. 253, pp. 1397-1399.10.1126/science.253.5026.1397 ↗
20. [20] R. Hickling: Phys. Rev. Lett., 1994, vol. 73, pp. 2853-2856.10.1103/PhysRevLett.73.2853 ↗
21. W. Kurz and D.J. Fisher: Fundamentals of solidification, 1989.
22. W.F. Gale and T.C. Totemeir: Smithells Metals Reference Book, 2004.
23. A. Zhang, J. Du, X. Zhang, Z. Guo, Q. Wang, S. Xiong: Metall. Mater. Trans. A, 2020, vol. 51(A), pp. 1023-1037.10.1007/s11661-019-05593-3 ↗
24. U. Sari and I. Aksoy: J. Alloys Compd., 2006, vol. 417, pp. 138-142.10.1016/j.jallcom.2005.09.049 ↗
25. E. C. Pereira, L. A. Matlakhova, A. N. Matlakhov, C. J. de Araújo, C. Y. Shigue and S. N. Monteiro: J. Alloys Compd., 2016, vol. 688, pp. 436-446.10.1016/j.jallcom.2016.07.210 ↗
26. [26] M. Javanbakht and V. I. Levitas: J. Mech. Phys. Solids., 2015, vol. 82, pp. 164-185.10.1016/j.jmps.2015.05.006 ↗
27. T. H. Kim, G. Ouyang, J. D. Poplawsky, M. J. Kramer, V. I. Levitas, J. Cui and L. Zhou: J. Alloys Compd., 2019, vol. 808, p. 151743.10.1016/j.jallcom.2019.151743 ↗
28. V. Recarte, R.B. Perez-Saez, E.H. Bocanegra, M.L. Nó and J. SanJuan: Metall. Mater. Trans. A, 2002, vol. 33(8), pp. 2581-2591.10.1007/s11661-002-0379-8 ↗
29. [29] H. Sakamoto and K. Shimizu: ISIJ Int., 1989, vol. 29, pp. 395-404.10.2355/isijinternational.29.395 ↗
30. C. Chien, S. K. Wu and S. H. Chang: Mater. Trans., 2015, vol. 56(2), pp. 193-199.10.2320/matertrans.M2014304 ↗
31. [31] Z. Trojanová, P. Lukác, W. Riehemann and B. L. Mordike: Mater. Sci. Eng. A, 1997, vol. 226: pp. 867-870.10.1016/S0921-5093(97)80090-1 ↗
32. A. V. Granato, K. Lucke: J. Appl. Phys., 1956, vol. 27(7): pp. 789-805.10.1063/1.1722485 ↗
33. G. Fan and Y. Zhou: Mater. Sci. Eng. A, 2009, vol. 521, pp. 178.10.1016/j.msea.2008.09.086 ↗
34. M. Li, J. Liu, S. Yan and B. Shi: J. Alloys Compd., 2019, vol. 821, pp. 153213.10.1016/j.jallcom.2019.153213 ↗
35. [35] E. O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747-753.10.1088/0370-1301/64/9/303 ↗
36. [36] N. J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
37. [37] H. Yu, Y. Xin, M. Wang, and Q. Liu: J. Mater. Sci. Technol., 2018, vol. 34(2), pp. 248-256.10.1016/j.jmst.2017.07.022 ↗