Analysis of Residual Stresses in Laser-Shock-Peened and Shot-Peened Marine Steel Welds
Source abstract
Abstract
Laser peening is now the preferred method of surface treatment in many applications. The magnitude and depth of the compressive residual stress induced by laser peening can be influenced strongly by the number of peen layers (the number of laser hits at each point) and by processing conditions including the use of a protective ablative layer. In this study, residual stresses have been characterized in laser and shot-peened marine butt welds with a particular focus at the fatigue crack initiation location at the weld toe. X-ray diffraction, synchrotron X-ray diffraction, incremental center-hole drilling, and the contour method were used for determination of residual stress. Results showed that the use of ablative tape increased the surface compressive stress, and the depth of compressive stress increased with an increase in number of peening layers. A key result is that variation of residual stress profile across laser peen spots was seen, and the residual stress magnitude varies between the center and edges of the spots.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Laser Material Processing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J.A. Fox: Appl. Phys. Lett. 1974, vol. 24, pp. 461–64.10.1063/1.1655012 ↗
2. M.R. Hill, A.T. DeWald, A.G. Demma, L.A. Hackel, H.-L. Chen, C. B. Dane, R. C. Specht and F. B. Harris, Adv. Mater. Process. 2003, vol. 161, p. 65.
3. Y. Cao and Y.C. Shin: J. Eng. Materi. Technol. 2010, vol. 132, pp. 041005.10.1115/1.4002048 ↗
4. A.T. DeWald, J.E. Rankin, M.R. Hill, M.J. Lee and H.-L. Chen: J. Eng. Mater. Technol. 2004, vol. 126, pp. 465–73.10.1115/1.1789957 ↗
5. N. Smyth, and P.E. Irving, Adv. Materi. Res. 2014, vol. 891–892, pp. 980–85.10.4028/www.scientific.net/AMR.891-892.980 ↗
6. H. Wohlfahrt, R. Kopp and O. Vöhringer, Shot Peening, Deutsche Gesellschaft für Metallkunde, 1987.
7. H. Polezhayeva, D. Howarth, M. Kumar, B. Ahmad and M.E. Fitzpatrick: Weld. World 2015, vol. 59, pp. 713–21.10.1007/s40194-015-0247-y ↗
8. C. Genzel, I.A. Denks, J. Gibmeier, M. Klaus and G. Wagener, Nucl. Instrum. Methods Phys. Res. Sect. A 2007, vol. 578, pp. 23–33.10.1016/j.nima.2007.05.209 ↗
9. Y. Zhang, S. Ganguly, L. Edwards and M.E. Fitzpatrick: Acta Materi 2004, vol. 52, pp. 5225–32.10.1016/j.actamat.2004.07.045 ↗
10. M.B. Prime: J. Eng. Mater. Technol. 2000, vol. 123, pp. 162–68.10.1115/1.1345526 ↗
11. B. Ahmad and M.E. Fitzpatrick: Metall. Mater. Trans. A 2016, vol. 47, pp. 301–13.10.1007/s11661-015-3231-7 ↗
12. G. Johnson, PhD Thesis (University of Manchester: 2008).
13. M.B. Prime, R.J. Sebring, J.M. Edwards, D.J. Hughes and P.J. Webster: Expe. Mech. 2004, vol. 44, pp. 176–84.10.1007/BF02428177 ↗
14. M.E. Fitzpatrick, A.T. Fry, P. Holdway, F.A. Kandil and J. Shackleton: Report No. ISSN 1473-2734, National Physical Laboratory, Teddington, 2002.
15. G.S. Schajer: J. Eng. Mater. Technol. 1988, vol. 110, pp. 338–49.10.1115/1.3226059 ↗
16. P.V. Grant, J.D. Lord and P.S. Whitehead: Report No. ISSN 1368-6550, National Physical Laboratory, Teddington, UK, 2002.
17. T. Pirling, G. Bruno and P.J. Withers, Materials Science and Engineering: A 2006, vol. 437, pp. 139–44.10.1016/j.msea.2006.04.083 ↗
18. J.E. Rankin, M.R. Hill and L.A. Hackel, Mater. Sci. Eng. A 2003, vol. 349, pp. 279–91.10.1016/S0921-5093(02)00811-0 ↗
19. M. Dorman, M. B. Toparli, N. Smyth, A. Cini, M.E. Fitzpatrick and P.E. Irving, Materials Science and Engineering: A 2012, vol. 548, pp. 142–51.10.1016/j.msea.2012.04.002 ↗
20. B. Ahmad and M.E. Fitzpatrick: J. Eng., 2015. http://digital-library.theiet.org/content/journals/10.1049/joe.2015.0084.
21. A.D. Evans, A. King, T. Pirling, G. Bruno, and P.J. Withers: in Ninth International Conference on Shot Peening, 2005. http://www.shotpeener.com/library/pdf/2005124.pdf.