journal article·2023-09Open access

Analysis of the As-Cast Microstructure and Properties of the Ni-Based Superalloy MAR-M247® Produced Via Directional Solidification

Łukasz Rakoczy, Małgorzata Grudzień-Rakoczy, Rafał Cygan, Tomasz Kargul, Łukasz Maj, Anna Zielińska-Lipiec

Abstract

Abstract The presented research investigates MAR-M247® Ni-based superalloy castings produced via directional solidification at various mold preheating temperatures (1510, 1566 °C) and withdrawal rates (3.4, 5.0 mm/min). Casting analyses were carried out via thermodynamic simulations, differential scanning calorimetry (DSC), X-ray diffraction (XRD), light microscopy (LM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM), and tensile testing. On DSC curve, four effects have been registered during cooling: liquidus (1337 °C), formation of eutectic γ − γ′ (1315 °C), precipitation of Ni7(Hf, Zr)2 (1244 °C), and M5B3 borides (1201 °C). The castings’ primary and secondary dendrite arm spacing decreases with increasing withdrawal rates for both shell mold temperatures. The dendritic regions of the castings are characterized by a relatively homogenous microstructure, consisting of γ′ precipitates surrounded by the matrix, with a mean size in the range of 0.437 to 0.481 μm, depending on the casting parameters. In the interdendritic spaces, γ − γ′ eutectic, MC carbides, M5B3, Ni7(Hf, Zr)2, and M3C2 phases were identified. The ultimate tensile strength of the produced castings was in the range of 970 to 1088 MPa.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. R. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. W. Xuan, C. Li, D. Zhao, B. Wang, C. Li, Z. Ren, Y. Zhong, X. Li, and G. Cao: Metall. Mater. Trans. B, 2017, vol. 48, pp. 394–405. https://doi.org/10.1007/s11663-016-0823-6.10.1007/s11663-016-0823-6 ↗
3. C. Sims, S. Stoloff, and W. Hagel: Superalloys II, Wiley-Interscience, New York, 1987.
4. D. Szeliga: Metall. Mater. Trans. A, 2022, vol. 53, pp. 3224–31. https://doi.org/10.1007/s11661-022-06752-9.10.1007/s11661-022-06752-9 ↗
5. X. Wang, T. Huang, W. Yang, Q. Yue, C. He, P. Qu, J. Zhang, and L. Liu: Vacuum, 2021, vol. 183, p. 109800. https://doi.org/10.1016/j.vacuum.2020.109800.10.1016/j.vacuum.2020.109800 ↗
6. Ł Rakoczy, M. Grudzień, and R. Cygan: J. Mater. Eng. Perform., 2019, vol. 28, pp. 3826–34. https://doi.org/10.1007/s11665-018-3853-1.10.1007/s11665-018-3853-1 ↗
7. P. Peng, L. Lu, Z. Liu, Y. Xu, X. Zhang, Z. Ma, H. Zhang, M. Guo, and L. Liu: J. Alloys Compd., 2022, vol. 927, p. 167009. https://doi.org/10.1016/j.jallcom.2022.167009.10.1016/j.jallcom.2022.167009 ↗
8. J. Nawrocki, M. Motyka, D. Szeliga, W. Ziaja, R. Cygan, and J. Sieniawski: J. Manuf. Process., 2020, vol. 49, pp. 153–61. https://doi.org/10.1016/j.jmapro.2019.11.028.10.1016/j.jmapro.2019.11.028 ↗
9. J. Xiao, W. Jian, D. Han, K. Li, Y. Lu, and L. Lou: J. Alloys Compd., 2022, vol. 898, p. 162782. https://doi.org/10.1016/j.jallcom.2021.162782.10.1016/j.jallcom.2021.162782 ↗
10. S. Gu, H. Gao, Z. Wen, H. Pei, Z. Li, Y. Zhao, and Z. Yue: J. Alloys Compd., 2021, vol. 884, p. 161055. https://doi.org/10.1016/j.jallcom.2021.161055.10.1016/j.jallcom.2021.161055 ↗
11. Q. Li, H. Zhang, Y. Cheng, M. Du, M. Gao, T. Hong, Y. Lin, and H. Zhang: J. Alloys Compd., 2022, vol. 923, p. 166930. https://doi.org/10.1016/j.jallcom.2022.166390.10.1016/j.jallcom.2022.166390 ↗
12. K. Liu, J. Wang, Y. Yang, and Y. Zhou: J. Alloys Compd., 2021, vol. 883, p. 160723. https://doi.org/10.1016/j.jallcom.2021.160723.10.1016/j.jallcom.2021.160723 ↗
13. Y. Zhao, M. Zhang, L. Yang, Y. Guo, J. Zhang, H. Lu, Y. Chen, and D. Tang: Progress Nat. Sci.: Mater. Int., 2021, vol. 31, pp. 493–500. https://doi.org/10.1016/j.pnsc.2021.04.010.10.1016/j.pnsc.2021.04.010 ↗
14. E. Scheil: Z. Metallkd., 1942, vol. 34, pp. 70–72.
15. N. Saunders: in Proceedings of the Superalloys 1996. Warrendale, Pennsylvania, 1996.
16. C. Walter, B. Hallstedt, and N. Warnken: Mater. Sci. Eng. A, 2005, vol. 397(1–2), pp. 385–90. https://doi.org/10.1016/j.msea.2005.02.056.10.1016/j.msea.2005.02.056 ↗
17. Ł Rakoczy, M. Grudzień-Rakoczy, B. Rutkowski, R. Cygan, F. Hanning, G. Cios, S. Habisch, J. Andersson, P. Mayr, and A. Zielińska-Lipiec: Arch. Civ. Mech. Eng., 2023, vol. 23, p. 119. https://doi.org/10.1007/s43452-023-00659-x.10.1007/s43452-023-00659-x ↗
18. A. Mirak and M. Fathi: Mater. Charact, 2022, vol. 104, p. 112449. https://doi.org/10.1016/j.matchar.2022.112449.10.1016/j.matchar.2022.112449 ↗
19. T. Grosdidier, A. Hazotte, and A. Simon: Mater. Sci. Eng. A, 1998, vol. 256, pp. 183–96. https://doi.org/10.1016/S0921-5093(98)00795-3.10.1016/S0921-5093(98)00795-3 ↗
20. M. Doi, T. Miyazaki, and T. Wakatsuki: Mater. Sci. Eng., 1984, vol. 67, pp. 247–53. https://doi.org/10.1016/0025-5416(84)90056-9.10.1016/0025-5416(84)90056-9 ↗
21. A. Ardell: Interface Sci., 1995, vol. 3, pp. 119–25. https://doi.org/10.1007/BF00207013.10.1007/BF00207013 ↗
22. A. Bhambri, T. Kattamis, and J. Morral: Metall. Trans. B, 1975, vol. 6, pp. 523–37. https://doi.org/10.1007/BF02913844.10.1007/BF02913844 ↗
23. N. D’Souza, H. Dong, M. Ardakani, and B. Shollock: Scripta Mater., 2005, vol. 53, pp. 729–33. https://doi.org/10.1016/j.scriptamat.2005.05.012.10.1016/j.scriptamat.2005.05.012 ↗
24. D. Kim, G. Lee, D. Kim, and S. Jeong: J. Mater. Sci. Technol., 2013, vol. 29, pp. 1184–90. https://doi.org/10.1016/j.jmst.2013.09.022.10.1016/j.jmst.2013.09.022 ↗
25. Ł Rakoczy, B. Rutkowski, M. Grudzień-Rakoczy, R. Cygan, W. Ratuszek, and A. Zielińska-Lipiec: Materials, 2020, vol. 13, p. 4452. https://doi.org/10.3390/ma13194452.10.3390/ma13194452 ↗
26. Ł Rakoczy, M. Grudzień-Rakoczy, F. Hanning, G. Cempura, R. Cygan, J. Andersson, and A. Zielińska-Lipiec: Metall. Mater. Trans. A, 2021, vol. 52, pp. 4767–84. https://doi.org/10.1007/s11661-021-06420-4.10.1007/s11661-021-06420-4 ↗
27. A. Baldan: J. Mater. Sci., 1991, vol. 26, pp. 3879–90. https://doi.org/10.1007/BF01184986.10.1007/BF01184986 ↗
28. A. Jena and M. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39. https://doi.org/10.1007/BF00549796.10.1007/BF00549796 ↗
29. P. Nash and A. Nash: Bull. Alloy Phase Diagr., 1983, vol. 4, pp. 250–53. https://doi.org/10.1007/BF02868664.10.1007/BF02868664 ↗
30. H. Motejadded, M. Soltanieh, and S. Rastegari: J. Mater. Sci. Technol., 2011, vol. 27(10), pp. 885–92. https://doi.org/10.1016/S1005-0302(11)60160-6.10.1016/S1005-0302(11)60160-6 ↗
31. Z. Yunrong, W. Yuping, X. Jizhou, P. Caron, and T. Khan: in Superalloys 1988. Champion, Pennsylvania, 1988. https://doi.org/10.7449/1988/superalloys_1988_335_344.10.7449/1988/superalloys_1988_335_344 ↗
32. S. Babu, S. David, J. Vitek, and M. Miller: J. Phys. IV Proc., 1996, vol. 06(C5), pp. 253–58. https://doi.org/10.1051/jp4:1996541.10.1051/jp4:1996541 ↗
33. Y. Murata, R. Ninomiya, and N. Yukawa: Scripta Metall., 1988, vol. 22, pp. 21–6. https://doi.org/10.1016/S0036-9748(88)80299-0.10.1016/S0036-9748(88)80299-0 ↗
34. Allied-Signal Aerospace Company: Engine Materials Specification 55447. Castings, Investment, MAR-M247. Phoenix; Allied-Signal Aerospace Company: 1988
35. A.M.S. Costa, E.S.N. Lopes, R.J. Contieri, R. Caram, R. Baldan, G.E. Fuchs, and C.A. Nunes: J. Mater. Eng. Perform., 2019, vol. 28(4), pp. 2427–38. https://doi.org/10.1007/s11665-019-04014-1.10.1007/s11665-019-04014-1 ↗
36. H.-Y. Bor, C.-N. Wei, A.-C. Yeh, W.-B. He, H.-S. Wang, and C.-M. Kuo: Heat treatment effects on the high temperature mechanical behavior of directionally solidified MAR- M247 superalloy, in The 8th Pacific Rim International Congress on Advanced Materials and Processing. F. Marquis, ed., TMS (The Minerals, Metals & Materials Society), 2013, pp. 379–86. https://doi.org/10.1007/978-3-319-48764-9_4610.1007/978-3-319-48764-9_46 ↗
37. J. Rame, D. Eyidi, A. Joulain, M. Gauthe, and J. Cormier: Metall. Mater. Trans. A, 2023, vol. 54, pp. 1496–508. https://doi.org/10.1007/s11661-023-07022-y.10.1007/s11661-023-07022-y ↗
38. S. Hamadi, F. Hamon, J. Delautre, J. Cormier, P. Villechaise, S. Utada, P. Kontis, and N. Bozzolo: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4246–61. https://doi.org/10.1007/s11661-018-4748-3.10.1007/s11661-018-4748-3 ↗
39. J.-B. le Graderend, J. Cormier, F. Gallerneau, P. Villechaise, S. Kruch, and J. Mendez: Int. J. Plast., 2014, vol. 59, pp. 55–83. https://doi.org/10.1016/j.ijplas.2014.03.004.10.1016/j.ijplas.2014.03.004 ↗
40. J. Westbrook: J. Min. Met. Mater. Soc., 1957, vol. 9, pp. 898–904. https://doi.org/10.1007/BF03397938.10.1007/BF03397938 ↗
41. P. Beardmore, R. Davies, and T. Johnston: Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 1537–45.