journal article·2023-03Open access

Mechanical Strength and Electrical Conductivity of Cu–In Solid Solution Alloy Wires

Yasunori Abe, Satoshi Semboshi, Naoya Masahashi, Sung Hwan Lim, Eun-Ae Choi, Seung Zeon Han

Abstract

Conductive spring wires for application in electrical components require high strength, high electrical conductivity, and convenient manufacturability. Copper–indium (Cu–In) solid solution alloys are suitable candidates for such wires because they exhibit effective solid solution strengthening without significantly decreasing the conductivity. Herein, we systematically investigate the microstructure of Cu–In alloy wires fabricated by severe drawing, along with their mechanical and electrical properties. During the initial drawing stages, high-density deformation twins are generated in the Cu–In alloy because the In solute efficiently reduces the stacking fault energy (SFE) of the Cu matrix. These deformation twins promote grain refinement during subsequent drawing. The Cu–5.0 at. pct In alloy wire, drawn severely to an equivalent strain of 4.61, possesses ultrafine grains measuring 60 to 80 nm with a high density of dislocations, resulting in excellent yield strength, tensile strength, and conductivity of 1280 MPa, 1340 MPa, and 24 pct relative to the International Annealing Cu Standard, respectively. These properties were comparable to those of age-hardenable Cu–Be and Cu–Ti alloys; thus, our results demonstrate that tuning the In content of the Cu matrix to reduce the SFE and optimizing the deformation strain to refine the grain size significantly improves the performance of alloy wires.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. X. Guoliang, W. Qiangsong, M. Xujun, X. Baiqing, and P. Lijun: Mater. Sci. Eng. A, 2012, vol. 558, pp. 326–30.10.1016/j.msea.2012.08.007 ↗
2. Q. Lei, Z. Li, T. Xiao, Y. Pang, Z.Q. Xiang, W.T. Qiu, and Z. Xiao: Intermetallics, 2013, vol. 42, pp. 77–84.10.1016/j.intermet.2013.05.013 ↗
3. S. Semboshi, Y. Kaneno, T. Takasugi, and N. Masahashi: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4956–65.10.1007/s11661-018-4816-8 ↗
4. S.Z. Han, E.-A. Choi, S.H. Lim, S. Kim, and J. Lee: Prog. Mater. Sci., 2021, vol. 117, p. 100720.10.1016/j.pmatsci.2020.100720 ↗
5. S. Semboshi, R. Hariki, T. Shuto, H. Hyodo, Y. Kaneno, and N. Masahsshi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4934–45.10.1007/s11661-021-06435-x ↗
6. K. Maki, Y. Ito, H. Matsunaga, and H. Mori: Scripta Mater., 2013, vol. 68, pp. 777–80.10.1016/j.scriptamat.2012.12.027 ↗
7. Y. Li, Z. Xiao, Z. Li, Z. Zhou, Z. Yang, and Q. Lei: J. Alloys Compd., 2017, vol. 723, pp. 1162–70.10.1016/j.jallcom.2017.06.155 ↗
8. N. Tsuji, T. Toyoda, Y. Minamino, Y. Koizumi, T. Yamane, M. Komatsu, and M. Kiritani: Mater. Sci. Eng. A, 2003, vol. 350, pp. 108–16.10.1016/S0921-5093(02)00709-8 ↗
9. Y. Koizumi, M. Ueyama, N. Tsuji, Y. Minamino, and K. Ota: J. Alloys Compd., 2003, vol. 30, pp. 47–51.10.1016/S0925-8388(03)00265-2 ↗
10. S. Riedel, J. Röber, and T. Geßner: Microelectron. Eng., 1997, vol. 33, pp. 165–72.10.1016/S0167-9317(96)00042-1 ↗
11. H. Yoshinaga: Phys. Status Solidi, 1966, vol. 18, pp. 625–36.10.1002/pssb.19660180215 ↗
12. J.W. Rutter and J. Reekie: Phys. Rev., 1950, vol. 78, pp. 70–71.10.1103/PhysRev.78.70 ↗
13. Y.H. Zhau, X.Z. Liao, Y.T. Zhu, Z. Horita, and T.G. Langdon: Mater Sci. Eng. A, 2005, vol. 410–411, pp. 188–93.10.1016/j.msea.2005.08.074 ↗
14. L. Balogh, T. Ungar, Y. Zhao, Y.T. Zhu, Z. Horita, C. Xu, and T.G. Langdon: Acta Mater., 2008, vol. 56, pp. 809–20.10.1016/j.actamat.2007.10.053 ↗
15. Y.H. Zhao, X.Z. Liao, Z. Horita, T.G. Langdon, and Y.T. Zhu: Mater. Sci. Eng. A, 2008, vol. 15, pp. 123–29.10.1016/j.msea.2007.11.074 ↗
16. S. Qu, X.H. An, H.J. Yang, C.X. Huang, G. Yang, Q.S. Zang, Z.G. Wang, S.D. Wu, and Z.F. Zhang: Acta Mater., 2009, vol. 57, pp. 1586–1601.10.1016/j.actamat.2008.12.002 ↗
17. R. Kumar, S.M. Dasharath, P.C. Kang, C.C. Koch, and S. Mula: Mater. Des., 2015, vol. 67, pp. 637–43.10.1016/j.matdes.2014.11.014 ↗
18. B.B. Straumal, A.R. Kilmametov, G.A. Lopez, I. Lopez-Ferreno, M.L. No, J. San Juan, H. Hahn, and B. Baretzky: Acta Mater., 2017, vol. 125, pp. 274–85.10.1016/j.actamat.2016.12.003 ↗
19. J.O. Linde: Helv. Phys. Acta, 1968, vol. 41, pp. 1007–15.
20. H.W. King: J. Mater. Sci., 1966, vol. 1, pp. 79–90.10.1007/BF00549722 ↗
21. P.C.J. Gallagher: Metall. Trans., 1970, vol. 1, pp. 2429–61.10.1007/BF03038370 ↗
22. Z.J. Zhang, Q.Q. Duan, X.H. An, S.D. Wu, G. Yang, and Z.F. Zhang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4259–67.10.1016/j.msea.2010.12.080 ↗
23. H. Bahmanpour, A. Kauffmann, M.S. Khoshkhoo, K.M. Youssef, S. Mula, J. Freudenberger, J. Eckert, R.O. Scattergood, and C.C. Koch: Mater. Sci. Eng. A, 2011, vol. 529, pp. 230–36.10.1016/j.msea.2011.09.022 ↗
24. A. Rohatgi, K.S. Vecchio, and G.T. Gray III.: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 135–45.10.1007/s11661-001-0109-7 ↗
25. N.M. Chavan, P.S. Phani, M. Ramakrishna, L. Venkatesh, P. Pant, and G. Sundararajan: Mater. Sci. Eng. A, 2021, vol. 814, p. 141242.10.1016/j.msea.2021.141242 ↗
26. Z. Bahari, E. Dichi, B. Legendre, and J. Dugué: Thermochim. Acta, 2003, vol. 401, pp. 131–38.10.1016/S0040-6031(02)00500-2 ↗
27. S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–77.10.1557/JMR.2008.0050 ↗
28. The Japanese Institute of Metals and Materials (ed): Metals Data book, 4th ed. Maruzen Corporation, Tokyo, 2017, p. 43. (Japanese).
29. T.H. Davis and J.A. Rayne: Phys. Rev. B, 1972, vol. 6, pp. 2931–42.10.1103/PhysRevB.6.2931 ↗
30. J. Miyake and M.E. Fine: Acta Metall. Mater., 1992, vol. 40, pp. 733–41.10.1016/0956-7151(92)90015-7 ↗
31. K. Nakanishi and H. Suzuki: Trans. JIM, 1974, vol. 15, pp. 435–40.10.2320/matertrans1960.15.435 ↗
32. L. Cizek, P. Kratochochvil, and B. Smola: J. Mater. Sci., 1974, vol. 9, pp. 1517–20.10.1007/BF00552938 ↗
33. A. Studies, P.O. Box, and P.H. Uk: J. Mater. Sci., 1993, vol. 28, pp. 2557–76.10.1007/BF00356192 ↗
34. K.A. Weidenmann, R. Tavangar, and L. Weber: Mater. Sci. Eng. A, 2009, vol. 523, pp. 226–34.10.1016/j.msea.2009.05.069 ↗
35. N. Khobragade, K. Sikdar, B. Kumar, S. Bera, and D. Roy: J. Alloys Compd., 2019, vol. 776, pp. 123–32.10.1016/j.jallcom.2018.10.139 ↗
36. Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, Z. Horita, T.G. Langdone, and Y.T. Zhu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4959–66.10.1016/j.msea.2010.04.036 ↗
37. C.J. Barr and K. Xia: J. Mater. Sci. Technol., 2021, vol. 82, pp. 57–68.10.1016/j.jmst.2020.12.016 ↗
38. C.X. Huang, W. Hu, G. Yang, Z.F. Zhang, S.D. Wu, Q.Y. Wang, and G.G. Gottstein: Mater. Sci. Eng. A, 2012, vol. 556, pp. 638–47.10.1016/j.msea.2012.07.041 ↗
39. S. Semboshi, Y. Kaneno, T. Takasugi, S.Z. Han, and N. Masahashi: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1389–96.10.1007/s11661-018-5088-z ↗
40. L. Lu, Y.F. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304, pp. 422–26.10.1126/science.1092905 ↗
41. Y. Miyajima, S. Okubo, H. Abe, H. Okumura, T. Fujii, S. Onaka, and M. Kato: Mater. Charact., 2015, vol. 104, pp. 101–06.10.1016/j.matchar.2015.04.009 ↗
42. C. Wang, F. Li, L. Wei, Y. Yang, and J. Dong: Mater. Sci. Eng. A, 2013, vol. 571, pp. 95–102.10.1016/j.msea.2013.01.057 ↗
43. Y.Z. Tian, Y.P. Ren, S. Gao, R.X. Zheng, J.H. Wang, H.C. Pan, Z.F. Zhang, N. Tsuji, and G.W. Qin: J. Mater. Sci. Technol., 2020, vol. 48, pp. 31–35.10.1016/j.jmst.2019.12.023 ↗