Strengthening Effects at Dissimilar Metal Interfaces Created by Ultrasonic Additive Manufacturing
Source abstract
Abstract
Ultrasonic additive manufacturing (UAM) technology can produce structural materials with complex geometries and embedded sensors. Under UAM-processing conditions, complex interfaces are created between these materials due to high-strain rate (> 105 s−1) plastic deformation. Fundamental understanding of strengthening mechanisms at these interfaces are needed for engineering deployment. In this research, we correlated the interface microstructure to their strengthening mechanisms using nanoindentation and electron microscopy techniques. Strengthening at interface regions is correlated to microstructural features at different length scales including refined grains (200 nm), increase in vacancy clusters (1016 cm−3), and dislocation networks (1010 cm−2). This conclusion was arrived through superposition principles to describe the combination of many strengthening mechanisms and their respective microstructure feature sensitivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. D.E. Schick: Ohio State University, MS Thesis, 2009.
2. D.E. Schick, R.M. Hahnlen, R.R. Dehoff, P. Collins, S.S. Babu, M.J. Dapino, and J.C. Lippold: Weld. J., 2010, vol. 89, pp. 105–15.
3. D. Schick, S.S. Babu, D.R. Foster, M. Dapino, M. Short, and J.C. Lippold: Rapid Prototyp. J., 2011, vol. 17, pp. 369–79.10.1108/13552541111156496 ↗
4. V.K. Patel, S.D. Bhole, and D.L. Chen: Scripta Mater., 2011, vol. 65, pp. 911–14.10.1016/j.scriptamat.2011.08.009 ↗
5. H.T. Fujii, Y. Goto, Y.S. Sato, and H. Kokawa: Scripta Mater., 2016, vol. 116, pp. 135–38.10.1016/j.scriptamat.2016.02.004 ↗
6. S. Mostafavi, D.F. Hesser, and B. Markert: J. Manuf. Process., 2018, vol. 36, pp. 104–14.10.1016/j.jmapro.2018.09.020 ↗
7. Fabrasonic: Ultrasonic additive manufacturing, https://www.youtube.com/watch?v=5s0J-7W4i6s, (accessed 1 October 2019).
8. P.J. Wolcott and M.J. Dapino: Addit. Manuf. Handb. Prod. Dev. Def. Ind., 2017, pp. 275–313.10.1201/9781315119106-17 ↗
9. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315–60.10.1080/09506608.2015.1116649 ↗
10. A. Hehr and M. Norfolk: Rapid Prototyp. J., 2019, https://doi.org/10.1108/RPJ-03-2019-0056.10.1108/RPJ-03-2019-0056 ↗
11. N. Sridharan and C.M. Petrie: ASM Handb., 2020, vol. 24, pp. 247–60.
12. C.P. Massey, C.J. Havrilak, M.N. Gussev, K.A. Terrani, and A.T. Nelson: Mater. Lett., 2021, vol. 302, p. 130330.10.1016/j.matlet.2021.130330 ↗
13. C.D. Hopkins, M.J. Dapino, and S.A. Fernandez: J. Eng. Mater. Technol. Trans. ASME, 2010, vol. 132, pp. 1–9.10.1115/1.4002073 ↗
14. J.O. Obielodan, B.E. Stucker, E. Martinez, J.L. Martinez, D.H. Hernandez, D.A. Ramirez, and L.E. Murr: J. Mater. Process. Technol., 2011, vol. 211, pp. 988–95.10.1016/j.jmatprotec.2010.12.017 ↗
15. J.M. Sietins, J.W. Gillespie, and S.G. Advani: J. Mater. Res., 2014, vol. 29, pp. 1970–77.10.1557/jmr.2014.176 ↗
16. R.J. Friel and R.A. Harris: Procedia CIRP, 2013, vol. 6, pp. 35–40.10.1016/j.procir.2013.03.004 ↗
17. S. Masurtschak, R.J. Friel, A. Gillner, J. Ryll, and R.A. Harris: J. Mater. Process. Technol., 2013, vol. 213, pp. 1792–1800.10.1016/j.jmatprotec.2013.04.008 ↗
18. G.D.J. Ram, C. Robinson, Y. Yang, and B.E. Stucker: Rapid Prototyp. J., 2007, vol. 13, pp. 226–35.10.1108/13552540710776179 ↗
19. M.R. Sriraman, S.S. Babu, and M. Short: Scripta Mater., 2010, vol. 62, pp. 560–63.10.1016/j.scriptamat.2009.12.040 ↗
20. N. Sridharan, M. Norfolk, and S.S. Babu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2517–28.10.1007/s11661-016-3354-5 ↗
21. M.J. Dapino: ASME 2014 Conf. Smart Mater. Adapt. Struct. Intell. Syst. SMASIS 2014, 2014, vol. 2, pp. 1–8.
22. R.J. Friel: in Power Ultrasonics, Loughborough University, 2013, pp. 313–35.
23. J.R. Burns, B. Petrovic, D. Chandler, and K.A. Terrani: Ann. Nucl. Energy, 2018, vol. 115, pp. 403–14.10.1016/j.anucene.2018.02.003 ↗
24. A. Hehr, J. Wenning, K. Terrani, S.S. Babu, and M. Norfolk: JOM, 2017, vol. 69, pp. 485–90.10.1007/s11837-016-2205-6 ↗
25. C.M. Petrie, N. Sridharan, A. Hehr, M. Norfolk, and J. Sheridan: in Advanced Manufacturing and Material Science: General, vol. 120, 2019, pp. 438–41.
26. C. Petrie, N. Sridharan, C. Frederick, T. McFalls, S. Suresh Babu, A. Hehr, M. Norfolk, and J. Sheridan: 11th Nucl. Plant Instrumentation, Control. Human-Machine Interface Technol. NPIC HMIT 2019, 2019, pp. 459–68.
27. C.M. Petrie, N. Sridharan, A. Hehr, M. Norfolk, and J. Sheridan: Smart Mater. Struct., 2019, vol. 28, p. 085041.10.1088/1361-665X/ab2a27 ↗
28. C.M. Petrie, N. Sridharan, M. Subramanian, A. Hehr, M. Norfolk, and J. Sheridan: Smart Mater. Struct., 2019, vol. 28, p. 055012.10.1088/1361-665X/ab0b4e ↗
29. A. Hehr, M. Norfolk, J. Wenning, J. Sheridan, P. Leser, P. Leser, and J.A. Newman: JOM, 2018, vol. 70, pp. 315–20.10.1007/s11837-017-2709-8 ↗
30. C.Y. Kong and R. Soar: Appl. Opt., 2005, vol. 44, p. 6325.10.1364/AO.44.006325 ↗
31. M. Pagan, C. Petrie, D. Leonard, N. Sridharan, S. Zinkle, and S.S. Babu: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 1142–57.10.1007/s11661-020-06131-2 ↗
32. R.F. Tylecote: The Solid Phase Welding of Metals, Edwards Arnold, 1968.
33. M.R. Sriraman, M. Gonser, H.T. Fujii, S.S. Babu, and M. Bloss: J. Mater. Process. Technol., 2011, vol. 211, pp. 1650–57.10.1016/j.jmatprotec.2011.05.003 ↗
34. K. Sojiphan: Ohio State University, PhD Dissertation, 2015.
35. A.G. Truog: Ohio State University, MS Thesis, 2012.
36. H.T. Fujii, M.R. Sriraman, and S.S. Babu: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 4045–55.10.1007/s11661-011-0805-x ↗
37. T. Han, C.-H. Kuo, N. Sridharan, L.M. Headings, S.S. Babu, and M.J. Dapino: Mater. Sci. Eng. A, 2020, vol. 769, p. 138457.10.1016/j.msea.2019.138457 ↗
38. P.J. Wolcott, N. Sridharan, S.S. Babu, A. Miriyev, N. Frage, and M.J. Dapino: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 114–23.10.1179/1362171815Y.0000000072 ↗
39. N. Sridharan, M. Gussev, R. Seibert, C.M. Parish, M. Norfolk, K. Terrani, and S.S. Babu: Acta Mater., 2016, vol. 117, pp. 228–37.10.1016/j.actamat.2016.06.048 ↗
40. M.R. Sriraman, H.T. Fujii, M. Gonser, S.S. Babu, and M. Short: 21st Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF 2010, 2010, pp. 372–82.
41. R.R. Dehoff and S.S. Babu: Acta Mater., 2010, vol. 58, pp. 4305–15.10.1016/j.actamat.2010.03.006 ↗
42. G.M. Pharr, J.H. Strader, and W.C. Oliver: J. Mater. Res., 2009, vol. 24, pp. 653–66.10.1557/jmr.2009.0096 ↗
43. D. Li and R.C. Soar: Mater. Sci. Eng. A, 2008, vol. 498, pp. 421–29.10.1016/j.msea.2008.08.037 ↗
44. P.S. Phani and W.C. Oliver: Mater. Des., 2019, vol. 164, p. 107563.10.1016/j.matdes.2018.107563 ↗
45. G.F. Vander Voort: in Practical Applications of Quantitative Metallography, J.L. McCall and J.H. Steele, eds., American Society for Testing and Materials, 1984, pp. 85–131.
46. R.K. Ham: Philos. Mag. A, 1961, vol. 6, pp. 1183–84.10.1080/14786436108239679 ↗
47. K. Johnson, H.C. Edmonds, R.L. Higginson, and R.A. Harris: Proc. Inst. Mech. Eng. L, 2011, vol. 225, pp. 277–87.
48. .D. Tabor: Microindentation Tech. Mater. Sci. Eng. ASTM STP 889, 1986, pp. 129–59.10.1520/STP32955S ↗
49. C. Zhang and L. Li: Metall. Mater. Trans. B, 2009, vol. 40, pp. 196–207.10.1007/s11663-008-9224-9 ↗
50. P. Zhu, Y. Zhao, S. Agarwal, J. Henry, and S.J. Zinkle: Mater. Des., 2022, vol. 213, p. 110317.10.1016/j.matdes.2021.110317 ↗
51. N.A. Stelmashenko, M.G. Walls, L.M. Brown, and Y.V. Milman: Acta Metall. Mater., 1993, vol. 41, pp. 2855–65.10.1016/0956-7151(93)90100-7 ↗
52. M.S. De Guzman, G. Neubauer, P. Flinn, and W.D. Nix: Mater. Res. Soc. Proc., 1993, vol. 308, p. 613.10.1557/PROC-308-613 ↗
53. M. Atkinson: J. Mater. Res., 1995, vol. 10, p. 2908.10.1557/JMR.1995.2908 ↗
54. Q. Ma and D.R. Clarke: J. Mater. Res., 1995, vol. 10, p. 853.10.1557/JMR.1995.0853 ↗
55. W.J. Poole, M.F. Ashby, and N.A. Fleck: Scripta Mater., 1996, vol. 34, pp. 559–64.10.1016/1359-6462(95)00524-2 ↗
56. K.W. McElhaney, J.J. Vlassak, and W.D. Nix: J. Mater. Res., 1998, vol. 13, pp. 1300–06.10.1557/JMR.1998.0185 ↗
57. S. Suresh, T.G. Nieh, and B.W. Choi: Scripta Mater., 1999, vol. 41, pp. 951–57.10.1016/S1359-6462(99)00245-6 ↗
58. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
59. Y. Huang, F. Zhang, K.C. Hwang, W.D. Nix, G.M. Pharr, and G. Feng: J. Mech. Phys. Solids, 2006, vol. 54, pp. 1668–86.10.1016/j.jmps.2006.02.002 ↗
60. Z. Wang, J. Zhang, A. Ma, A. Hartmaier, Y. Yan, and T. Sun: Mater. Today Commun., 2020, vol. 25, p. 101314.10.1016/j.mtcomm.2020.101314 ↗
61. G.M. Pharr, E.G. Herbert, and Y. Gao: Annu. Rev. Mater. Res., 2010, vol. 40, pp. 271–92.10.1146/annurev-matsci-070909-104456 ↗
62. J.G. Swadener, E.P. George, and G.M. Pharr: J. Mech. Phys. Solids, 2002, vol. 50, pp. 681–94.10.1016/S0022-5096(01)00103-X ↗
63. D. Tabor: Rev. Phys. Technol., 1970, vol. 1, pp. 145–79.10.1088/0034-6683/1/3/I01 ↗
64. D. Tabor: J. Lubr. Technol., 1981, vol. 103, pp. 169–79.10.1115/1.3251622 ↗
65. G.E. Dieter: Mechanical Metallurgy, 3rd ed. McGraw-Hill, New York, 2016.
66. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
67. W.P. Davey: Phys. Rev., 1925, vol. 25, pp. 753–61.10.1103/PhysRev.25.753 ↗
68. R. Reed-Hill: Physical Metallurgy Principles, 4th ed. Cengage, Boston, 1964.
69. E.O. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747–55.10.1088/0370-1301/64/9/303 ↗
70. N.J. Petch: J. Iron. Steel Inst, 1953, vol. 174, pp. 25–28.
71. Z.C. Cordero, B.E. Knight, and C.A. Schuh: Int. Mater. Rev., 2016, vol. 61, pp. 495–512.10.1080/09506608.2016.1191808 ↗
72. C.C. Lo, J.A. Augis, and M.R. Pinnel: J. Appl. Phys., 1979, vol. 50, pp. 6887–91.10.1063/1.325890 ↗
73. Y.H. Chew, C.C. Wong, F. Wulff, F.C. Lim, and H.M. Goh: Thin Solid Films, 2008, vol. 516, pp. 5376–80.10.1016/j.tsf.2007.07.090 ↗
74. S. Floreen and J.H. Westbrook: Acta Metall., 1969, vol. 17, pp. 1175–81.10.1016/0001-6160(69)90095-9 ↗
75. D.E. Sonon and G.V. Smith: Trans. Am. Inst. Met. Eng, 1968, vol. 242, pp. 1527–33.
76. Y. Nakada and A.S. Keh: Metall. Trans. A, 1971, vol. 2, pp. 441–47.10.1007/BF02663332 ↗
77. B.A. Wilcox and A.H. Clauer: Acta Metall., 1972, vol. 20, pp. 743–57.10.1016/0001-6160(72)90103-4 ↗
78. A.W. Thompson: Acta Metall., 1975, vol. 23, pp. 1337–42.10.1016/0001-6160(75)90142-X ↗
79. G.D. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, and R.W. Armstrong: Scripta Mater., 1986, vol. 20, pp. 93–97.10.1016/0036-9748(86)90219-X ↗
80. A.M. El-Sherik, U. Erb, G. Palumbo, and K.T. Aust: Scripta Mater., 1992, vol. 27, pp. 1185–88.10.1016/0956-716X(92)90596-7 ↗
81. F. Ebrahimi, G.R. Bourne, M.S. Kelly, and T.E. Matthews: Nanostruct. Mater., 1999, vol. 11, pp. 343–50.10.1016/S0965-9773(99)00050-1 ↗
82. V.E. Cosslett and R.N. Thomas: Br. J. Appl. Phys., 1964, vol. 15, pp. 1283–1300.10.1088/0508-3443/15/11/305 ↗
83. C.A. Schuh, T.G. Nieh, and T. Yamasaki: Scripta Mater., 2002, vol. 46, pp. 735–40.10.1016/S1359-6462(02)00062-3 ↗
84. L.E. Samuels and T.O. Mulhearn: J. Mech. Phys. Solids, 1957, vol. 5, pp. 125–34.10.1016/0022-5096(57)90056-X ↗
85. K.L. Johnson: Contact Mechanics, Cambridge University Press, Cambridge, 1985.10.1017/CBO9781139171731 ↗
86. R.L. Fleischer: Acta Metall., 1963, vol. 11, pp. 203–09.10.1016/0001-6160(63)90213-X ↗
87. K. Ralls, T.H. Courtney, and F. Wulff: Introduction to Materials Science and Engineering, Wiley, New York, 1976.
88. A. Akhtar and T. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1339–49.10.1016/0001-6160(69)90151-5 ↗
89. J.A. Yasi, L.G. Hector, and D.R. Trinkle: Acta Mater., 2010, vol. 58, pp. 5704–13.10.1016/j.actamat.2010.06.045 ↗
90. Y. Nakada and A.S. Keh: Acta Metall., 1968, vol. 16, pp. 903–14.10.1016/0001-6160(68)90057-6 ↗
91. C.H. Caceres and D.W. Rovera: J. Light Met., 2001, vol. 1, pp. 151–56.10.1016/S1471-5317(01)00008-6 ↗
92. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd., 2009, vol. 481, pp. 379–84.10.1016/j.jallcom.2009.02.131 ↗
93. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd., 2009, vol. 472, pp. 234–40.10.1016/j.jallcom.2008.04.049 ↗
94. M. Walbruhl, D. Linder, J. Agren, and A. Borgenstam: Mater. Sci. Eng. A, 2017, vol. 700, pp. 301–11.10.1016/j.msea.2017.06.001 ↗
95. R.L. Fleischer: Acta Metall., 1961, vol. 9, pp. 996–1000.10.1016/0001-6160(61)90242-5 ↗
96. R.L. Fleischer: Acta Metall., 1962, vol. 10, pp. 835–42.10.1016/0001-6160(62)90098-6 ↗
97. G.W.C. Kaye and T.H. Laby: Tables of Physics and Chemical Constants, 15th ed. Longman, London, 1993.
98. R. Maddin and A.H. Cottrell: Philos. Mag. A, 1955, vol. 46, pp. 735–43.10.1080/14786440708520600 ↗
99. M. Zehetbauer: Mech. Corros. Prop. A, 1994, vol. 97–98, pp. 287–306.
100. J.R. Townsend, J.A. DiCarlo, R.L. Nielsen, and D. Stabell: Acta Metall., 1969, vol. 17, pp. 425–36.10.1016/0001-6160(69)90023-6 ↗