journal article·2022-08Open access

In Situ Investigation of TCP Phase Formation, Stress Relaxation and γ/γ′ Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction

A. Bezold, H. J. Stone, C. M. F. Rae, S. Neumeier

Abstract

Abstract In nickel-based superalloys, the lattice misfit between the γ and γ′ phases and the propensity to TCP phase formation at service temperatures critically influence the microstructural evolution that takes place and hence the resultant mechanical properties. In this work, the lattice misfits of a series of highly alloyed Ru-containing 4th generation Ni-base superalloys are investigated by in situ X-ray diffraction (XRD) at high temperature. While the lattice misfit values of all alloys range between − 0.3 and − 1.3 pct at room temperature, they show an atypical temperature dependence, becoming less negative above 900 °C. In situ XRD measurements at 1100 °C reveal that the majority of the internal coherency stresses are already relieved after two hours. This is particularly pronounced for the alloys that have both a lattice misfit larger than |0.6| pct at 1100 °C and are prone to TCP phase formation. However, throughout the relaxation of the internal coherency stresses the lattice misfit remains fairly constant. Due to the similar chemical compositions of the alloys studied, qualitative guidelines for an optimum lattice misfit magnitude are developed by comparing the lattice misfit values with previous creep experiments. Our results indicate that no universal optimal lattice misfit value exists for these alloys and the value strongly depends on the applied creep conditions. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. J.S. Van Sluytman and T.M. Pollock: Acta Mater., 2012, vol. 60, pp. 1771–83. https://doi.org/10.1016/j.actamat.2011.12.008.10.1016/j.actamat.2011.12.008 ↗
2. K.A. Christofidou, N.G. Jones, E.J. Pickering, R. Flacau, M.C. Hardy, and H.J. Stone: J. Alloys Compd., 2016, vol. 688, pp. 542–52. https://doi.org/10.1016/j.jallcom.2016.07.159.10.1016/j.jallcom.2016.07.159 ↗
3. H. Mughrabi: Acta Mater., 2014, vol. 81, pp. 21–29. https://doi.org/10.1016/j.actamat.2014.08.005.10.1016/j.actamat.2014.08.005 ↗
4. R.C. Reed: Camb. Core., 2006, https://doi.org/10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
5. J.X. Zhang, T. Murakumo, H. Harada, and Y. Koizumi: Scripta Mater., 2003, vol. 48, pp. 287–93. https://doi.org/10.1016/S1359-6462(02)00379-2.10.1016/S1359-6462(02)00379-2 ↗
6. J. Zhang, J. Wang, H. Harada, and Y. Koizumi: Acta Mater., 2005, vol. 53, pp. 4623–33. https://doi.org/10.1016/j.actamat.2005.06.013.10.1016/j.actamat.2005.06.013 ↗
7. R. Giraud, Z. Hervier, J. Cormier, G. Saint-Martin, F. Hamon, X. Milhet, and J. Mendez: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 131–46. https://doi.org/10.1007/s11661-012-1397-9.10.1007/s11661-012-1397-9 ↗
8. J. Svoboda and P. Lukáš: Acta Mater., 1998, vol. 46, pp. 3421–31. https://doi.org/10.1016/S1359-6454(98)00043-3.10.1016/S1359-6454(98)00043-3 ↗
9. F. Pyczak, B. Devirent, and H. Mughrabi: in Superalloys 2004 Tenth Int. Symp., TMS, 2004, pp. 827–36.https://doi.org/10.7449/2004/Superalloys_2004_827_83610.7449/2004/Superalloys_2004_827_836 ↗
10. L. Mueller, T. Link, and M. Feller-kniepmeier: Scripta Metall. Mater., 1992, https://doi.org/10.1016/0956-716X(92)90580-8.10.1016/0956-716X(92)90580-8 ↗
11. F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, and M. Göken: Scripta Mater., 2018, vol. 142, pp. 129–32. https://doi.org/10.1016/j.scriptamat.2017.08.039.10.1016/j.scriptamat.2017.08.039 ↗
12. K. Tanaka, M. Ooshima, N. Tsuno, A. Sato, and H. Inui: Philos. Mag., 2012, vol. 92, pp. 4011–27. https://doi.org/10.1080/14786435.2012.700416.10.1080/14786435.2012.700416 ↗
13. F. Diologent, P. Caron, T. d’Almeida, S. Chambreland, A. Jacques, and P. Bastie: Int. J. Mater. Res., 2006, vol. 97, pp. 1136–42. https://doi.org/10.3139/146.101350.10.3139/146.101350 ↗
14. S. Neumeier, F. Pyczak, and M. Göken: Mater. Des., 2021, vol. 198, p. 109362. https://doi.org/10.1016/j.matdes.2020.109362.10.1016/j.matdes.2020.109362 ↗
15. A.C. Yeh, C.M.F. Rae, and S. Tin: in Superalloys 2004 Tenth Int. Symp., TMS, 2004, pp. 677–85. https://doi.org/10.7449/2004/Superalloys_2004_677_68510.7449/2004/Superalloys_2004_677_685 ↗
16. A. Sato, H. Harada, T. Yokokawa, T. Murakumo, Y. Koizumi, T. Kobayashi, and H. Imai: Scripta Mater., 2006, vol. 54, pp. 1679–84. https://doi.org/10.1016/j.scriptamat.2006.01.003.10.1016/j.scriptamat.2006.01.003 ↗
17. A. Heckl, S. Neumeier, S. Cenanovic, M. Göken, and R.F. Singer: Acta Mater., 2011, vol. 59, pp. 6563–73. https://doi.org/10.1016/j.actamat.2011.07.002.10.1016/j.actamat.2011.07.002 ↗
18. K. Matuszewski, R. Rettig, H. Matysiak, Z. Peng, I. Povstugar, P. Choi, J. Müller, D. Raabe, E. Spiecker, K.J. Kurzydłowski, and R.F. Singer: Acta Mater., 2015, vol. 95, pp. 274–83. https://doi.org/10.1016/j.actamat.2015.05.033.10.1016/j.actamat.2015.05.033 ↗
19. R.A. Hobbs, L. Zhang, C.M.F. Rae, and S. Tin: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1014–25. https://doi.org/10.1007/s11661-008-9490-9.10.1007/s11661-008-9490-9 ↗
20. A.C. Yeh and S. Tin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2621–31. https://doi.org/10.1007/BF02586097.10.1007/BF02586097 ↗
21. H.T. Pang, R.A. Hobbs, H.J. Stone, and C.M.F. Rae: Adv. Mater. Res., 2011, vol. 278, pp. 54–59. https://doi.org/10.4028/www.scientific.net/AMR.278.54.10.4028/www.scientific.net/AMR.278.54 ↗
22. T. Sugui, W. Minggang, L. Tang, Q. Benjiang, and X. Jun: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5444–51. https://doi.org/10.1016/j.msea.2010.05.027.10.1016/j.msea.2010.05.027 ↗
23. A. Volek, R.F. Singer, R. Buergel, J. Grossmann, and Y. Wang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 405–10. https://doi.org/10.1007/s11661-006-0011-4.10.1007/s11661-006-0011-4 ↗
24. L. Wang, S. Wang, X. Song, Y. Liu, and G. Xu: Int. J. Fatigue, 2014, vol. 62, pp. 210–16. https://doi.org/10.1016/j.ijfatigue.2013.10.006.10.1016/j.ijfatigue.2013.10.006 ↗
25. Z. Zhang and Z. Yue: J. Alloys Compd., 2018, vol. 746, pp. 84–92. https://doi.org/10.1016/j.jallcom.2018.02.133.10.1016/j.jallcom.2018.02.133 ↗
26. H.-A. Kuhn, H. Biermann, T. Ungár, and H. Mughrabi: Acta Metall. Mater., 1991, vol. 39, pp. 2783–94. https://doi.org/10.1016/0956-7151(91)90095-I.10.1016/0956-7151(91)90095-I ↗
27. F. Pyczak, S. Neumeier, and M. Göken: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 295–300. https://doi.org/10.1016/j.msea.2008.08.052.10.1016/j.msea.2008.08.052 ↗
28. H. Biermann, M. Strehler, and H. Mughrabi: Scripta Metall. Mater., 1995, vol. 32, pp. 1405–10. https://doi.org/10.1016/0956-716X(95)00179-Y.10.1016/0956-716X(95)00179-Y ↗
29. T. Link, A. Epishin, U. Brückner, and P. Portella: Acta Mater., 2000, vol. 48, pp. 1981–94. https://doi.org/10.1016/S1359-6454(99)00456-5.10.1016/S1359-6454(99)00456-5 ↗
30. A. Jacques and P. Bastie: Philos. Mag., 2003, vol. 83, pp. 3005–27. https://doi.org/10.1080/1478643031000149108.10.1080/1478643031000149108 ↗
31. R.A. Hobbs, G.J. Brewster, C.M.F. Rae, and S. Tin: in Superalloys 2008 Elev. Int. Symp., TMS, 2008, pp. 171–80https://doi.org/10.7449/2008/Superalloys_2008_171_18010.7449/2008/Superalloys_2008_171_180 ↗
32. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods., 2012, vol. 9, pp. 671–75. https://doi.org/10.1038/nmeth.2089.10.1038/nmeth.2089 ↗
33. S. Giese, A. Bezold, M. Pröbstle, A. Heckl, S. Neumeier, and M. Göken: Metall. Mater. Trans. A, 2020, https://doi.org/10.1007/s11661-020-06028-0.10.1007/s11661-020-06028-0 ↗
34. M. Wilkens and K. Eckert: Z. Für Naturforschung A, 1964, https://doi.org/10.1515/zna-1964-0410.10.1515/zna-1964-0410 ↗
35. C.H. Zenk, S. Neumeier, H.J. Stone, and M. Göken: Intermetallics, 2014, vol. 55, pp. 28–39. https://doi.org/10.1016/j.intermet.2014.07.006.10.1016/j.intermet.2014.07.006 ↗
36. D. Siebörger, H. Knake, and U. Glatzel: Mater. Sci. Eng. A, 2001, vol. 298, pp. 26–33. https://doi.org/10.1016/S0921-5093(00)01318-6.10.1016/S0921-5093(00)01318-6 ↗
37. C. Schulze and M. Feller-Kniepmeier: Mater. Sci. Eng. A, 2000, vol. 281, pp. 204–12. https://doi.org/10.1016/S0921-5093(99)00713-3.10.1016/S0921-5093(99)00713-3 ↗
38. R. Völkl, U. Glatzel, and M. Feller-Kniepmeier: Acta Mater., 1998, vol. 46, pp. 4395–4404. https://doi.org/10.1016/S1359-6454(98)00085-8.10.1016/S1359-6454(98)00085-8 ↗
39. U. Brückner, A. Epishin, T. Link, and K. Dressel: Mater. Sci. Eng. A, 1998, vol. 247, pp. 23–31. https://doi.org/10.1016/S0921-5093(97)00856-3.10.1016/S0921-5093(97)00856-3 ↗
40. S. Neumeier, J. Ang, R.A. Hobbs, C.M.F. Rae, and H.J. Stone: Adv. Mater. Res., 2011, vol. 278, pp. 60–65. https://doi.org/10.4028/www.scientific.net/AMR.278.60.10.4028/www.scientific.net/AMR.278.60 ↗
41. C.J. Smithells: Metals Reference Book, Elsevier Science, Kent, 2014. http://qut.eblib.com.au/patron/FullRecord.aspx?p=1839022. Accessed 26 April 2020.
42. M.V. Nathal: Metall. Trans. A, 1987, vol. 18A, pp. 1961–70. https://doi.org/10.1007/BF02647026.10.1007/BF02647026 ↗
43. T. Murakumo, T. Kobayashi, Y. Koizumi, and H. Harada: Acta Mater., 2004, vol. 52, pp. 3737–44. https://doi.org/10.1016/j.actamat.2004.04.028.10.1016/j.actamat.2004.04.028 ↗
44. S. Neumeier, F. Pyczak, and M. Göken: in Superalloys 2008 Elev. Int. Symp., TMS, 2008, pp. 109–19. https://doi.org/10.7449/2008/Superalloys_2008_109_11910.7449/2008/Superalloys_2008_109_119 ↗
45. G.R. Leverant and B.H. Kear: Metall. Mater. Trans. B, 1970, vol. 1, pp. 491–98. https://doi.org/10.1007/BF02811560.10.1007/BF02811560 ↗
46. G.R. Leverant, B.H. Kear, and J.M. Oblak: Metall. Trans., 1973, vol. 4, pp. 355–62. https://doi.org/10.1007/BF02649637.10.1007/BF02649637 ↗
47. C.M.F. Rae, N. Matan, and R.C. Reed: Mater. Sci. Eng. A, 2001, vol. 300, pp. 125–34. https://doi.org/10.1016/S0921-5093(00)01788-3.10.1016/S0921-5093(00)01788-3 ↗
48. C.M.F. Rae and R.C. Reed: Acta Mater., 2007, vol. 55, pp. 1067–81. https://doi.org/10.1016/j.actamat.2006.09.026.10.1016/j.actamat.2006.09.026 ↗
49. V. Sass, U. Glatzel, and M. Feller-Kniepmeier: Acta Mater., 1996, vol. 44, pp. 1967–77. https://doi.org/10.1016/1359-6454(95)00315-0.10.1016/1359-6454(95)00315-0 ↗
50. N. Tsuno, K. Kakehi, C.M.F. Rae, and R. Hashizume: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 269–72. https://doi.org/10.1007/s11661-008-9744-6.10.1007/s11661-008-9744-6 ↗
51. S. Shimabayashi and K. Kakehi: Scripta Mater., 2010, vol. 63, pp. 909–12. https://doi.org/10.1016/j.scriptamat.2010.06.048.10.1016/j.scriptamat.2010.06.048 ↗
52. S. Ma, L. Carroll, and T.M. Pollock: Acta Mater., 2007, vol. 58, pp. 5802–12.10.1016/j.actamat.2007.06.042 ↗
53. L.J. Carroll, Q. Feng, and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1290–1307. https://doi.org/10.1007/s11661-008-9520-7.10.1007/s11661-008-9520-7 ↗
54. H. Mughrabi, W. Schneider, V. Sass, and C. Lang: Strength Mater. ICSMA, 1994, vol. 10, pp. 705–08.
55. P. Caron, P.J. Henderson, T. Khan, and M. McLean: Scripta Metall., 1986, vol. 20, pp. 875–80. https://doi.org/10.1016/0036-9748(86)90458-8.10.1016/0036-9748(86)90458-8 ↗
56. R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, and C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367–81. https://doi.org/10.1016/S1359-6454(99)00217-7.10.1016/S1359-6454(99)00217-7 ↗
57. H. Harada, T. Yamagata, T. Yokokawa, K. Ohno, and M. Yamazaki: in Proc 5Th Int Conf Creep Fract. Eng. Mater. Struct., IOM, London, UK, 1993, pp. 255–64.
58. D.D. Pearson, B.H. Kear, and F.D. Lemkey: in Creep Fract., Pineridge Press, Swansea, 1981, p. 213.
59. P. Caron and T. Khan: Mater. Sci. Eng., 1983, vol. 61, pp. 173–84. https://doi.org/10.1016/0025-5416(83)90199-4.10.1016/0025-5416(83)90199-4 ↗
60. R.A. MacKay and L.J. Ebert: Metall. Trans. A, 1985, vol. 16A, pp. 1969–82. https://doi.org/10.1007/BF02662398.10.1007/BF02662398 ↗
61. F.R.N. Nabarro: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 513–30. https://doi.org/10.1007/BF02648942.10.1007/BF02648942 ↗