In Situ Observation and Growth Kinetics of Bainite Laths in the Coarse-Grained Heat-Affected Zone of 2.25Cr-1Mo Heat-Resistant Steel During Simulated Welding
Source abstract
Abstract
Austenite → bainite transformation has been documented in situ by confocal scanning laser microscope, and bainite growth kinetics has been quantified in the coarse-grained heat-affected zone of 2.25Cr-1Mo steel. Four typical nucleation sites of bainite laths have been identified. In addition, growth rate of nine distinctive bainite laths varies from 9 to 200 μm/s, depending on the degree of supercooling and nucleation sites of bainite laths.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. K. Laha, K.S. Chandravathi, K. Bhanu-Sankara-Rao, S.L. Mannan and D.H. Sastry: Metall. Mater. Trans. A, 2001, vol. 32, pp. 115-124.10.1007/s11661-001-0107-9 ↗
2. Y. Li and T.N. Baker: Mater. Sci. Technol., 2010, vol. 26, pp. 1029-1040.10.1179/026708309X12512744154360 ↗
3. E. Schmidt, Y. Wang and S. Sridhar: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1799-1810.10.1007/s11661-006-0122-y ↗
4. E.S. Davenport and E.C. Bain: Metall. Trans., 1970, vol. 1, pp. 3503-3530.10.1007/BF03037892 ↗
5. R.F. Hehemann, K.R. Kinsman and H.I. Aaronson: Metall. Trans. A, 1972, vol. 3, pp. 1077-1094.10.1007/BF02642439 ↗
6. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1999, vol. 273, pp. 58-66.10.1016/S0921-5093(99)00289-0 ↗
7. H.I. Aaronson, W.T. Reynolds, G.J. Shiflet and G. Spanos: Metall. Trans. A, 1990, vol. 21, pp. 1343-1380.10.1007/BF02672557 ↗
8. M. Hillert: ISIJ Int., 1995, vol. 35, pp. 1134-1140.10.2355/isijinternational.35.1134 ↗
9. A. Lambert-Perlade, A.F. Gourgues and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337-2348.10.1016/j.actamat.2004.01.025 ↗
10. D. Quidort and Y.J.M. Brechet: ISIJ Int., 2002, vol. 42, pp. 1010-1017.10.2355/isijinternational.42.1010 ↗
11. M. Kang, M.-X. Zhang and M. Zhu: Acta Mater., 2006, vol. 54, pp. 2121-2129.10.1016/j.actamat.2005.12.036 ↗
12. X. Zou, J. Sun, H. Matsuura and C. Wang: Metall. Mater. Trans. B, 2018, vol. 49, pp. 2168-2173.10.1007/s11663-018-1326-4 ↗
13. W. Mu, P. Hedström, H. Shibata, P.G. Jönsson and K. Nakajima: JOM, 2018, vol. 70, pp. 2283-2295.10.1007/s11837-018-2921-1 ↗
14. X. Yu, S.S. Babu, J.C. Lippold, H. Terasaki and Y.I. Komizo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1538-1546.10.1007/s11661-011-0746-4 ↗
15. Y. Shen, B. Chen and C. Wang: Metall. Mater. Trans. A, 2020, vol. 51, pp. 3371-3376.10.1007/s11661-020-05806-0 ↗
16. G. Xu, F. Liu, L. Wang and H. Hu: Scripta Mater., 2013, vol. 68, pp. 833-836.10.1016/j.scriptamat.2013.01.033 ↗
17. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833-3854.10.1023/A:1017973432592 ↗
18. S.I. Wright, M.M. Nowell and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316-329.10.1017/S1431927611000055 ↗
19. Y. Shen and C. Wang: Metall. Mater. Trans. B, 2019, vol. 50, pp. 595-600.10.1007/s11663-019-01519-x ↗
20. Y. Shen, J. Leng and C. Wang: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1747-1752.10.1016/j.jmst.2019.03.035 ↗
21. H. Terasaki and Y.I. Komizo: Scripta Mater., 2011, vol. 64, pp. 29-32.10.1016/j.scriptamat.2010.08.055 ↗
22. T. Ko and S.A. Cottrell: J. Iron Steel Inst., 1952, vol. 172, pp. 307-312.
23. G. Mao, R. Cao, X. Guo, Y. Jiang and J. Chen: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5783-5798.10.1007/s11661-017-4348-7 ↗
24. R. Ricks, P. Howell and G. Barritte: J. Mater. Sci., 1982, vol. 17, pp. 732-740.10.1007/BF00540369 ↗
25. Z. Xu, X. Jin and J. Zhang: Phase Tansformation in Materials, 1st ed., Higher Education Press, Beijing, 2013, pp. 87-99.
26. H. Terasaki and Y.-I. Komizo: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2683-2689.10.1007/s11661-013-1610-5 ↗
27. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10, pp. 895-907.10.1007/BF02658309 ↗
28. S. Zhang, N. Hattori, M. Enomoto and T. Tarui: ISIJ Int., 1996, vol. 36, pp. 1301-1309.10.2355/isijinternational.36.1301 ↗
29. C. Wells, W. Batz and R.F. Mehl: JOM, 1950, vol. 2, pp. 553-560.10.1007/BF03399032 ↗
30. P. Thibaux, A. Métenier and C. Xhoffer: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1169-1176.10.1007/s11661-007-9150-5 ↗
31. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, 7th ed., Elsevier, Oxford, 1992, pp. 994-995.
32. M. Zhou, G. Xu, L. Wang and H. Hu: Trans. Indian Inst. Met., 2016, vol. 69, pp. 693-698.10.1007/s12666-015-0541-9 ↗
33. A. Endo, H.S. Chauhan, Y. Nakamura and Y. Shiohara: J. Mater. Res., 1996, vol. 11, pp. 1114-1119.10.1557/JMR.1996.0142 ↗
34. G. Liang, Y. Ali, G. You and M.-X. Zhang: Materialia, 2018, vol. 3, pp. 113-121.10.1016/j.mtla.2018.08.008 ↗
35. Z.W. Hu, G. Xu, H.J. Hu, L. Wang and Z.L. Xue: Int. J. Miner. Metall. Mater., 2014, vol. 21, pp. 371-378.10.1007/s12613-014-0918-5 ↗
36. X. Li, X. Ma, S.V. Subramanian, R.D.K. Misra and C. Shang: Metall. Mater. Trans. E, 2015, vol. 2, pp. 1-11.
37. H. Terasaki and Y.-I. Komizo: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5289-5293.10.1007/s11661-013-1998-y ↗