journal article·2020-12Open access

Effect of Tempering on the Bainitic Microstructure Evolution Correlated with the Hardness in a Low-Alloy Medium-Carbon Steel

Adam Ståhlkrantz, Peter Hedström, Niklas Sarius, Hans-Åke Sundberg, Sören Kahl, Mattias Thuvander, Annika Borgenstam

Abstract

Abstract A low-alloy medium-carbon bainitic steel was isothermally tempered at 300 °C for up to 24 hours which led to a significant hardness decrease. In order to explain the decreasing hardness, extensive microstructural characterization using scanning and transmission electron microscopy, X-ray diffraction, and atom probe tomography was conducted. The experimental work was further supplemented by thermodynamic and kinetic simulations. It is found that the main underlying reason for the hardness reduction during tempering is related to dislocation annihilation, possibly also with corresponding changes in Cottrell atmospheres. On the other hand, cementite precipitate size, effective grain size of the bainite, and retained austenite fraction appear unchanged over the whole tempering cycle.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A. Hultgren: A Metallographic Study on Tungsten Steels, Wiley, New York, 1920.
2. A. Borgenstam, M. Hillert and J. Ågren: Acta Mater., 2009, Vol. 57, 3242-52.10.1016/j.actamat.2009.03.026 ↗
3. J. Yin, M. Hillert and A. Borgenstam: Metall. Mater. Trans. A, 2017, Vol. 48A, 4006-24.10.1007/s11661-017-4208-5 ↗
4. J. Yin, M. Hillert and A. Borgenstam: Metall. Mater. Trans. A, 2017, Vol. 48A, 1444-58.10.1007/s11661-016-3902-z ↗
5. A. S. Podder, PhD thesis, University of Cambridge, Cambridge, UK, 2011.
6. M. J. Peet, PhD thesis, University of Cambridge, Cambridge, UK, 2010.
7. M. J. Peet, S. S. Babu, M. K. Miller and H. Bhadeshia: Metall. Mater. Trans. A, 2017, Vol. 48A, 3410-18.10.1007/s11661-017-4086-x ↗
8. S. He, B. He, K. Zhu and M. Huang: Acta Mater., 2017, Vol. 135, 382-89.10.1016/j.actamat.2017.06.050 ↗
9. C. Garcia-Mateo, M. Peet, F. Caballero and H. Bhadeshia: Mater. Sci. Technol., 2004, Vol. 20, 814-18.10.1179/026708304225017355 ↗
10. C. Garcia-Mateo and F. Caballero: ISIJ Int., 2005, Vol. 45, 1736-40.10.2355/isijinternational.45.1736 ↗
11. C. Garcia-Mateo, F. G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, Vol. 43, 1821-25.10.2355/isijinternational.43.1821 ↗
12. H. K. D. H. Bhadeshia: Bainite in Steels: Theory and Practice, Institute of Materials, Minerals & Mining, Wakefield, 2015.
13. M. A. Santajuana, R. Rementeria, M. Kuntz, J. A. Jimenez, F. G. Caballero and C. Garcia-Mateo: Metall. Mater. Trans. A, 2018, Vol. 49A, 2026-36.10.1007/s11661-018-4595-2 ↗
14. L. Chang and H. Bhadeshia: Mater. Sci. Technol., 1995, Vol. 11, 874-82.10.1179/mst.1995.11.9.874 ↗
15. G. Esteves, K. Ramos, C. M. Fancher, and J. L. Jones: https://www.researchgate.net/publication/316985889_LIPRAS_Line-Profile_Analysis_Software, 2017.
16. H. Bhadeshia, S. David, J. Vitek and R. Reed: Mater. Sci. Technol., 1991, Vol. 7, 686-98.10.1179/mst.1991.7.8.686 ↗
17. C. Scott and J. Drillet: Scr. Mater., 2007, Vol. 56, 489-92.10.1016/j.scriptamat.2006.11.033 ↗
18. D. Dyson: J. Iron Steel Inst., 1970, Vol. 208, 469-74.
19. ASTM, Standard Practice for X-ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, ASTM, West Conshohocken, 2013.
20. J.-O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman: Calphad, 2002, Vol. 26, 273-312.10.1016/S0364-5916(02)00037-8 ↗
21. A. Borgenstam, L. Höglund, J. Ågren and A. Engström: J. Phase Equilib., 2000, Vol. 21, 269.10.1361/105497100770340057 ↗
22. G. Williamson and W. Hall: Acta Metall., 1953, Vol. 1, 22-31.10.1016/0001-6160(53)90006-6 ↗
23. G. Williamson and R. Smallman: Philos. Mag., 1956,Vol. 1, 34-46.10.1080/14786435608238074 ↗
24. A. Stormvinter, A. Borgenstam and J. Ågren: Metall. Mater. Trans. A, 2012, Vol. 43, 3870-79.10.1007/s11661-012-1171-z ↗
25. C. Du, J. Hoefnagels, R. Vaes and M. Geers: Scr. Mater., 2016, Vol. 116, 117-21.10.1016/j.scriptamat.2016.01.043 ↗
26. T. Ohmura, A. Minor, E. Stach and J. Morris: J. Mater. Res., 2004, Vol. 19, 3626-32.10.1557/JMR.2004.0474 ↗
27. A. Shibata, T. Nagoshi, M. Sone, S. Morito and Y. Higo: Mater. Sci. Eng. A, 2010, Vol. 527, 7538-44.10.1016/j.msea.2010.08.026 ↗
28. G. Miyamoto, J. Oh, K. Hono, T. Furuhara and T. Maki: Acta Mater., 2007, Vol. 55, 5027-38.10.1016/j.actamat.2007.05.023 ↗
29. W. Song, P.-P. Choi, G. Inden, U. Prahl, D. Raabe and W. Bleck: Metall. Mater. Trans. A, 2014, Vol. 45, 595-606.10.1007/s11661-013-2048-5 ↗
30. C. Zhu, X. Xiong, A. Cerezo, R. Hardwicke, G. Krauss and G. Smith: Ultramicroscopy, 2007, Vol. 107, 808-12.10.1016/j.ultramic.2007.02.033 ↗
31. F. G. Caballero, M. K. Miller, S. S. Babu and C. Garcia-Mateo: Acta Mater., 2007, Vol. 55, 381-90.10.1016/j.actamat.2006.08.033 ↗
32. F. G. Caballero, M. K. Miller, C. Garcia-Mateo, C. Capdevila and S. S. Babu: Acta Mater., 2008, Vol. 56, 188-99.10.1016/j.actamat.2007.09.018 ↗
33. F. G. Caballero, M. K. Miller, A. Clarke and C. Garcia-Mateo: Scr. Mater., 2010, Vol. 63, 442-45.10.1016/j.scriptamat.2010.04.049 ↗
34. F. G. Caballero, C. Garcia-Mateo, M. Santofimia, M. K. Miller and C. G. De Andrés: Acta Mater., 2009, Vol. 57, 8-17.10.1016/j.actamat.2008.08.041 ↗
35. F. G. Caballero, M. K. Miller and C. Garcia-Mateo: Acta Mater., 2010, Vol. 58, 2338-43.10.1016/j.actamat.2009.12.020 ↗
36. F. G. Caballero, M. K. Miller and C. Garcia-Mateo: Mater. Sci. Technol., 2010, Vol. 26, 889-98.10.1179/026708310X12635619987943 ↗
37. C. Garcia-Mateo, F. G. Caballero, M. K. Miller and J. A. Jiménez: J. Mater. Sci., 2012, Vol. 47, 1004-10.10.1007/s10853-011-5880-2 ↗
38. H. Stone, M. Peet, H. Bhadeshia, P. Withers, S. S. Babu, and E. D. Specht: Proc. R. Soc. A, 2008, Vol. 464, 1009-27.10.1098/rspa.2007.0201 ↗
39. L. Guo, H. Bhadeshia, H. Roelofs and M. Lembke: Mater. Sci. Technol., 2017, Vol. 33, 2147-56.10.1080/02670836.2017.1353669 ↗
40. A. S. Podder, I. Lonardelli, A. Molinari and H. Bhadeshia: Proc. R. Soc. A, 2011, Vol. 467, 3141-56.10.1098/rspa.2011.0212 ↗
41. M. Fondekar, A. Rao and A. Mallik: Metall. Trans., 1970, Vol. 1, 885-90.10.1007/BF02811769 ↗
42. S. He, B. He, K. Zhu and M. Huang: Acta Mater., 2018, Vol. 149, 46-56.10.1016/j.actamat.2018.02.023 ↗
43. S. Jonsson: Mechanical Properties of Metals and Dislocation Theory from an Engineer´S Perspective, The Royal Institute of Technology, Department of Materials Science and Engineering, Stockholm, 2010.
44. B. Hutchinson, D. Lindell and M. Barnett: ISIJ Int., 2015, Vol. 55, 1114-22.10.2355/isijinternational.55.1114 ↗
45. B. Hutchinson, P. Bate, D. Lindell, A. Malik, M. Barnett and P. Lynch: Acta Mater., 2018, Vol. 152, 239-47.10.1016/j.actamat.2018.04.039 ↗
46. C. Garcia-Mateo, J.A. Jiménez, H.-W. Yen, M. K. Miller, L. Morales-Rivas, M. Kuntz, S.P. Ringer, J.R. Yang, and F. G. Caballero: Acta Mater., 2015, Vol. 91, 162-73.10.1016/j.actamat.2015.03.018 ↗
47. C. N. Hulme-Smith, M. J. Peet, I. Lonardelli, A. C. Dippel and H. K. D. H. Bhadeshia: Mater. Sci., 2015, Vol. 31, 254-56.
48. C.N. Hulme-Smith, I. Lonardelli, A.C. Dippel, H.K.D.H. Bhadeshia, Scr. Mater., 2013, Vol. 69, 409-12.10.1016/j.scriptamat.2013.05.035 ↗