journal article·2020-11

β-Texture Evolution During α Precipitation in the Two-Step Forging Process of a Near-β Titanium Alloy

L. Meng, T. Kitashima, T. Tsuchiyama, M. Watanabe

Publisher page

Abstract

β-Texture evolution during consecutive forgings at the single β and (α + β) regions, i.e., two-step forging, was investigated in Ti-6Al-2Sn-4Zr-6Mo alloy. Grain-boundary (GB) α-phase initially formed during forging in the (α + β) region, and interior α-phase subsequently penetrated the β grains. The greater the (α + β) deformation under a constant total forging ratio, the stronger the promotion of interior α precipitation and growth. The {001} β fiber texture intensity increased with increasing forging ratio before the precipitation of interior α. This increase was promoted as the prior-β forging ratio was increased under a constant (α + β) forging ratio. However, the {001} β texture was weakened during the precipitation and growth of interior α. The higher α fraction led to enhanced weakening of the {001} texture. The precipitated α phase had strong $$ \left\{ {11\bar{2}0} \right\} $$ α texture, and the $$ \left\{ {10\bar{1}1} \right\}\left\langle {11\bar{2}0} \right\rangle $$ pyramidal slip system was the most active system in the α phase. The {001} β texture intensity was moderated by a dominant α slip that predominantly activated {110}〈111〉 β slip under the Burgers orientation relationship.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. G. Lütjering, J.C. Williams: Titanium, 2nd ed., Springer-Verlag, Berlin, Heidelberg, 2007.
2. C. Sauer, G. Luetjering: J. Mater. Process. Technol. 2001, vol. 117, pp. 311–317.10.1016/S0924-0136(01)00788-9 ↗
3. J.O. Peters, G. Lütjering, M. Koren, H. Puschnik, R.R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213, pp. 71–80.10.1016/0921-5093(96)10225-2 ↗
4. J.O. Peters, G. Lütjering: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2805–2818.10.1007/s11661-001-1031-8 ↗
5. S. Le Corre, R. Forestier, F. Brisset, M. Mathon, D. Solas: Proc. 13th World Conf. Titan., John Wiley & Sons, Inc., Hoboken, New Jersey, 2016, pp. 757–64.10.1002/9781119296126.ch127 ↗
6. J.K. Fan, H.C. Kou, M.J. Lai, B. Tang, H. Chang, J.S. Li: Mater. Sci. Eng. A, 2013, vol. 584, pp. 121–132.10.1016/j.msea.2013.07.019 ↗
7. C. Wu, L. Huang, C.M. Li: Mater. Sci. Eng. A, 2020, vol. 773, 138851.10.1016/j.msea.2019.138851 ↗
8. Y. Wu, H. Kou, Z. Wu, B. Tang, J. Li: J. Alloys Compd., 2018, vol. 749, pp. 844–852.10.1016/j.jallcom.2018.03.372 ↗
9. L. Meng, T. Kitashima, T. Tsuchiyama, M. Watanabe: Mater. Sci. Eng. A, 2020, vol. 771, 138640.10.1016/j.msea.2019.138640 ↗
10. M.M. Attallah, S. Zabeen, R.J. Cernik, M. Preuss: Mater. Charact., 2009, vol. 60, pp. 1248–1256.10.1016/j.matchar.2009.05.006 ↗
11. E. Bertrand, P. Castany, T. Gloriant: Scr. Mater., 2014, vol. 83, pp. 41–44.10.1016/j.scriptamat.2014.04.012 ↗
12. R. Davis, H.M. Flower, D.R.F. West: J. Mater. Sci., 1979, vol. 14, pp. 712–722.10.1007/BF00772735 ↗
13. R. Ding, Z.X. Guo, A. Wilson: Mater. Sci. Eng. A, 2002, vol. 327, pp. 233–245.10.1016/S0921-5093(01)01531-3 ↗
14. S. Zherebtsov, G. Salishchev, S. L. Semiatin: Philos. Mag. Lett., 2010, vol. 90, pp. 903–914.10.1080/09500839.2010.521526 ↗
15. K. Hua, J. Li, H. Kou, J. Fan, M. Sun, B. Tang: J. Alloys Compd., 2016, vol. 671, pp. 381–388.10.1016/j.jallcom.2016.02.102 ↗
16. W. Yu, M.Q. Li, J. Luo: Mater. Sci. Eng. A., 2010, vol. 527, pp. 4210–4217.10.1016/j.msea.2010.03.024 ↗
17. W.S. Lee, C.F. Lin: J. Mater. Process. Technol., 1998, vol. 75, pp. 127–136.10.1016/S0924-0136(97)00302-6 ↗
18. J. Teixeira, B. Appolaire, E. Aeby-Gautier, S. Denis, F. Bruneseaux: Acta Mater. 2006, 54, 4261–4271.10.1016/j.actamat.2006.05.019 ↗
19. Z. Sun, S. Guo, H. Yang: Acta Mater., 2013, vol. 61, pp. 2057–2064.10.1016/j.actamat.2012.12.025 ↗
20. T. Seshacharyulu, B. Dutta: Scr. Mater., 2002, vol. 46, pp. 673–678.10.1016/S1359-6462(02)00051-9 ↗
21. A. Dehghan-Manshadi, R.J. Dippenaar: Mater. Sci. Eng. A, 2012, vol. 552, pp. 451–456.10.1016/j.msea.2012.05.069 ↗
22. K. Wang, M. Wu, Z. Yan, D. Li, R. Xin, Q. Liu: Mater. Sci. Eng. A, 2018, vol. 712, pp. 440–452.10.1016/j.msea.2017.11.127 ↗
23. J.K. Fan, H.C. Kou, M.J. Lai, B. Tang, H. Chang, J.S. Li: Mater. Des., 2013, vol. 49, pp. 945–952.10.1016/j.matdes.2013.02.044 ↗
24. K. Hua, X. Xue, H. Kou, J. Fan, B. Tang, J. Li: J. Alloys Compd., 2014, vol. 615, pp. 531–537.10.1016/j.jallcom.2014.07.056 ↗
25. K. Li, P. Yang: Metals (Basel), 2017, vol. 7, pp. 1–8.
26. E.A. Calnan, C.J.B. Clews: London, Edinburgh, Dublin Philos. Mag. J. Sci., 1951, vol. 42, pp. 616–635.10.1080/14786445108561277 ↗
27. C.R. Weinberger, B.L. Boyce, C.C. Battaile: Int. Mater. Rev., 2013, vol. 58, pp. 296–314.10.1179/1743280412Y.0000000015 ↗
28. F. Mraizika-Chaussy, Evolutions microstructurales en compression a chaud des alliages de titane betacez et 6246 et influence du forgeage sur la transformation beta vers beta alpha, 1996.
29. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, P. Bocher: Acta Mater., 2008, vol. 56, pp. 4298–4308.10.1016/j.actamat.2008.04.065 ↗
30. H. Li, D.E. Mason, T.R. Bieler, C.J. Boehlert, M.A. Crimp: Acta Mater., 2013, vol. 61, pp. 7555–7567.10.1016/j.actamat.2013.08.042 ↗
31. [31] J.C. Williams, R.G. Baggerly, N.E. Paton: Metall. Mater. Trans. A, 2002, vol. 33, pp. 837–850.10.1007/s11661-002-0153-y ↗
32. M. Klimova, S. Zherebtsov, G. Salishchev, S. L. Semiatin: Mater. Sci. Eng. A, 2015, vol. 645, pp. 292–297.10.1016/j.msea.2015.08.008 ↗
33. S. L. Semiatin, N. Stefansson, R. D. Doherty: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1372–1376.10.1007/s11661-005-0229-6 ↗
34. S. Zherebtsov, M. Murzinova, G. Salishchev, S. L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138–4150.10.1016/j.actamat.2011.03.037 ↗
35. S. Suri, G.B. Viswanathan, T. Neeraj, D.H. Hou, M.J. Mills: Acta Mater., 1999, vol. 47, pp. 1019–1034.10.1016/S1359-6454(98)00364-4 ↗
36. C. Tan, Q. Sun, L. Xiao, Y. Zhao, J. Sun: J. Alloys Compd., 2017, vol. 724, pp. 112–120.10.1016/j.jallcom.2017.07.002 ↗
37. D. He, J. Zhu, S. Zaefferer, D. Raabe: Mater. Des., 2014, vol. 56, pp. 937–942.10.1016/j.matdes.2013.12.018 ↗
38. M.F. Savage, J. Tatalovich, M.J. Mills: Philos. Mag., 2004, vol. 84, pp. 1127–1154.10.1080/1478643032000158305 ↗
39. C. Wang, M.A. Monclús, L. Yang, Y. Cui, M.T. Pérez-Prado: Mater. Lett., 2020, vol. 264, 127398.10.1016/j.matlet.2020.127398 ↗