The Role of Thermomechanical Processing in Creep Deformation Behavior of Modified 9Cr-1Mo Steel
Source abstract
Abstract
In this study, to refine the microstructure and enhance the mechanical properties, thermomechanical treatment (TMT) was performed on modified 9Cr-1Mo steel. The creep deformation behavior of TMT processed steel and the steel in its normalized and tempered (NT) state were studied for different stress levels at 923 K (650 °C). Transient, secondary, and tertiary creep regimes were analyzed for both conditions of the steel based on the empirical equation $$ \varepsilon = \varepsilon0 + \varepsilon_{\text{t}} \left( {1 - e - rt } \right) + \varepsilon_{\text{s}} \cdot t + \varepsilon_{\text{L}} e^{{p\left( {t_{\text{t}} - t_{\text{r}} } \right)}} $$. The rate of exhaustion of primary creep (r), r with time to reach the minimum creep rate, minimum creep rate$$ \left( {\varepsilon_{ \hbox{min} } \cdot } \right) $$, $$ \varepsilon_{ \hbox{min} } \cdot $$ with time spent in the secondary creep regime, rate of acceleration of tertiary creep (p), p with time to reach the onset of tertiary creep, and creep rate with applied stress exhibited a proportional relationship in both conditions of the steel. This proportionality existence in the transient and tertiary creep deformation obeyed the first-order reaction rate kinetic theory. The enhanced MX (M = V, Nb; X = C, N) precipitation in the TMT steel significantly decreased the creep deformation rate and extended the secondary stages of deformation. TMT processing of modified 9Cr-1Mo steel led to a significant increase in the creep rupture strength through the stable microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. K. Maruyama, K. Sawada, and J. Koike: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
2. L. Tan, J.T. Busby, P.J. Maziasz, and Y. Yamamoto: J. Nucl. Mater., 2013, vol. 441, pp. 713–17.10.1016/j.jnucmat.2013.01.323 ↗
3. R.L. Klueh, N. Hashimoto, and P.J. Maziasz: J. Nucl. Mater., 2007, vols. 367–370, pp. 48–53.10.1016/j.jnucmat.2007.03.001 ↗
4. Abe F (2008) Sci. Technol. 9(2):15.
5. M. Song, C. Sun, Z. Fan, Y. Chen, R. Zhu, K.Y. Yu, K.T. Hartwig, H. Wang, and X. Zhang: Acta Mater., 2016, vol. 112, pp. 361–77.10.1016/j.actamat.2016.04.031 ↗
6. L. Tan, D.T. Hoelzer, J.T. Busby, M.A. Sokolov, and R.L. Klueh: J. Nucl. Mater., 2012, vol. 422, pp. 45–50.10.1016/j.jnucmat.2011.12.011 ↗
7. L. Tan, Y. Yang, and J.T. Busby: J. Nucl. Mater., 2013, vol. 442, pp. S13–S17.10.1016/j.jnucmat.2012.10.015 ↗
8. J. Pešička, R. Kužel, A. Dronhofer, and G. Eggeler: Acta Mater., 2003, vol. 51, pp. 4847–62.10.1016/S1359-6454(03)00324-0 ↗
9. E. Cerri, E. Evangelista, S. Spigarelli, and P. Bianchi: Mater. Sci. Eng. A, 1998, vol. 245, pp. 285–92.10.1016/S0921-5093(97)00717-X ↗
10. K. Laha, K.S. Chandravathi, P. Parameswaran, K. B. S. Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58–6810.1007/s11661-006-9050-0 ↗
11. Triratna Shrestha, Mehdi Basirat, Indrajit Charit, Gabriel P. Potirniche, and Karl K. Rink: Mater. Sci. Eng. A, 2013, vol. 565, pp. 382–91.10.1016/j.msea.2012.12.031 ↗
12. S. Hollner, B. Fournier, J. Le Pendu, T. Cozzika, I. Tournié, J.-C. Brachet, and A. Pineau: J. Nucl. Mater., 2010, vol. 405, pp. 101–08.10.1016/j.jnucmat.2010.07.034 ↗
13. D.V.V. Satyanarayana, G. Malakondaiah, C. Phaniraj, and D.S. Sarma: Mater. Sci. Technol., 2009, vol. 25 (8), pp. 953–59.10.1179/174328408X284487 ↗
14. C. Phaniraj, M. Nandagopal, S.L. Mannan, and P. Rodriguez: Acta Metall. Mater., 1991, vol. 39 (7), pp. 1651–56.10.1016/0956-7151(91)90253-W ↗
15. T.C. Totemeier, H. Tian, and J.A. Simpson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1519–25.10.1007/s11661-006-0096-9 ↗
16. Sakthivel T, Shruti P, Parameswaran P, Rao GVSN, Laha K, and Rao TS (2016): Trans. Ind. Inst. Met., 1:2310.1007/s12666-016-0902-z ↗
17. Irina Fedorova, Alla Kipelova, Andrey Belyakov, and Rustam Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 128–35.10.1007/s11661-012-1182-9 ↗
18. T. Sakthivel, S. P. Selvi, and K. Laha: Mater. Sci. Eng. A, 2015, vol. 640, pp. 61–71.10.1016/j.msea.2015.05.068 ↗
19. P.G. McVetty: Mech. Eng., 1934, vol. 56, p. 149.
20. F. Garofalo: Fundamentals of Creep and Creep Rupture in Metals, Macmillan, New York, NY, 1965.
21. J.B. Conway: Numerical Methods for Creep and Rupture Analysis, Gordon & Breach, New York, NY, 1968.
22. J.B. Conway and M.J. Mullikin: Trans. TMS-AIME, 1966, 242, p. 1496.
23. W.J. Evans and B. Wilshire: Trans. TMS-AIME, 1968, 242, p. 2514.
24. G.A. Webster, A.P.D. Cox, and J.E. Dorn: Met. Sci. J., 1969, vol. 3, p. 221.10.1179/msc.1969.3.1.221 ↗
25. P.W. Davies, W.J. Evans, K.R. Williams, and B. Wilshire: Scripta Metall., 1969, vol. 3, pp. 671–74.10.1016/0036-9748(69)90074-X ↗
26. P.W. Davies and K.R. Williams: Acta Metall., 1969, vol. 17, pp. 897–903.10.1016/0001-6160(69)90110-2 ↗
27. F. Dobes and J. Cadek: Kov. Mater., 1981, vol. 19, p. 31.