Precipitation of η-Ni3(Ti, Al) Phase at Grain Boundaries in an Austenitic Precipitation-Strengthened Stainless Steel
Source abstract
Abstract
The precipitation of the η-Ni3(Ti, Al) phase at grain boundaries in austenitic stainless steels significantly affects grain-boundary-related properties of the bulk material. In this study, the precipitation behavior of the η-Ni3(Ti, Al) phase in a thermally aged austenitic precipitation-strengthened stainless steel was evaluated during aging at 750 °C for 0.5 to 64 hours using scanning electron microscopy, transmission electron microscopy, and atom probe tomography. A higher number of plate-like η-Ni3(Ti, Al) phase particles precipitated at the grain boundaries with increasing aging time, and grew into the grain interior until the entire grain was occupied by this phase. The η phase had a {0001}η//{111}γ, $$ \langle 11\bar{2}0\rangle_{{{\upeta }}} $$ //〈110〉γ semi-coherent orientation relationship with the matrix, and contained many stacking faults. Ni- and Ti-rich layers alternated periodically between adjacent stacking faults in the η phase. Al segregated at stacking faults and the interface between the η phase and matrix. The partition coefficients of Ni, Al, and Si between the η precipitates and matrix decreased with increased aging time; however, the partition coefficient of Ti did not change significantly. The partition coefficients of the other elements increased with increasing aging time. The Ti:Al ratio of the η phase significantly increased with increasing aging time. Based on the experimental results, the precipitation and growth behaviors of η-Ni3(Ti, Al) phase precipitated at grain boundaries were discussed, which are expected to contribute to the design of austenitic stainless steel compositions with improved mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S.Q. Zhao, X.S. Xie, G.D. Smith, S.J. Patel: Mater. Sci. Eng., 2003, vol. 355A, pp. 96-105.10.1016/S0921-5093(03)00051-0 ↗
2. J.P. Shingledecker, G.M. Pharr: Metall. Mater. Trans., 2012, vol. A43, pp. 1902-10.10.1007/s11661-011-1013-4 ↗
3. Z.H. Zhong, Y.F. Gu, Y. Yuan: Mater. Sci. Eng., 2015, vol. A622, pp. 101–7.10.1016/j.msea.2014.11.010 ↗
4. C.S. Wang, Y.A. Guo, J.T. Guo, L.Z. Zhou: Mater. Sci. Eng., 2015, vol. A639, pp. 380–8.10.1016/j.msea.2015.05.026 ↗
5. C.S. Wang, Y.A. Guo, J.T. Guo, L.Z. Zhou: Mater. Des., 2015, vol. 88, pp. 790–8.10.1016/j.matdes.2015.09.098 ↗
6. T.T. Wang, C.S. Wang, W. Sun, X.Z. Qin, J.T. Guo, L.Z. Zhou: Mater. Des., 2014, vol. 62, pp. 225–32.10.1016/j.matdes.2014.05.020 ↗
7. Y.L. Xu, L. Zhang, J. Li, X.S. Xiao, X.L. Cao, G.Q. Jia, Z. Shen: Mater. Sci. Eng., 2012, vol. 544A, pp. 48-53.10.1016/j.msea.2012.03.006 ↗
8. X.Z. Qin, J.T. Guo, C.Yuan, J.S. Hou, L.Z. Zhou, H.Q. Ye: Mater. Sci. Eng., 2012, vol. 543A, pp. 121-8.10.1016/j.msea.2012.02.059 ↗
9. J.A. Brooks, A.W. Thompson: Metall. Mater. Trans., 1993, vol. A24, pp. 1983-91.10.1007/BF02666333 ↗
10. H.D. Cicoo, M.I. Luppo, L.M. Gribaudo, J. Ovejero-Garcia: Mater. Character., 2004, vol. 52, pp. 85-92.10.1016/j.matchar.2004.03.007 ↗
11. T.M. Smith, B.D. Esser, N. Antolin, G.B. Viswanathan, T. Hanlon, A. Wessman, D. Mourer, W. Windl, D.W. McComb, M.J. Mills: Acta Mater., 2015, vol. 100, pp. 19-31.10.1016/j.actamat.2015.08.053 ↗
12. Y.U. Heo, M. Takeguchi, K. Furuya, H.C. Lee: Acta Mater., 2009, vol. 57, pp. 1176-87.10.1016/j.actamat.2008.10.056 ↗
13. M. Detrois, R.C. Helmink, S. Tin: Metall. Mater. Trans., 2014, vol. A45, pp. 5332-43.10.1007/s11661-014-2499-3 ↗
14. H. Leitner, M. Schober, R. Schnitzer: Acta Mater., 2010, vol. 58, pp. 1261-9.10.1016/j.actamat.2009.10.030 ↗
15. S. Asgari, R. Sharghi-Moshtaghin, M. SadeghAhmadi, P. Pirouz: Phil. Mag., 2013, vol. 93, pp. 1351-70.10.1080/14786435.2013.773106 ↗
16. X.Y. Li, J. Zhang, L.J. Rong, Y.Y. Li: Chin. J. Mater. Res., 2006, vol. 20(2), pp. 113-9.
17. O.M. Messe, J.S. Barnard, E.J. Pickering, P.A. Midley, C.M.F. Rae: Phil. Mag., 2014, vol. 94, pp. 1132-52.10.1080/14786435.2013.878052 ↗
18. J.C. Zhao, V. Ravikumar, A.M. Beltran: Metall. Mater. Trans., 2001, vol. 32A, pp. 1271-82.10.1007/s11661-001-0217-4 ↗
19. S. Antonov, M. Detrois, R.C. Helmink, S. Tin: J. Alloy Comp., 2015, vol. 626, pp. 76-86.10.1016/j.jallcom.2014.11.155 ↗
20. M.K. Miller, Atom probe tomography: analysis at the atomic level, 1st ed., Kluwer Academic / Plenum Publisher, New York, 1999, p.33.
21. J.M. Cairney, D.W. Saxey, D. McGrouther, S.P. Ringer: Phy. B, 2007, vol. 394, pp. 267-269.10.1016/j.physb.2006.12.024 ↗
22. H. Li, H. Song, W.Q. Liu, S. Xia, B.X. Zhou, C. Su, W.Y. Ding: Ultramicroscopy, 2015, vol. 159, pp. 255–264.10.1016/j.ultramic.2015.06.001 ↗
23. M. Schober, R. Schnitzer, H. Leitner: Ultramicroscopy, 2009, vol. 109, pp. 553–62.10.1016/j.ultramic.2008.10.016 ↗
24. M.J. Wong, P.G. Sanders, J.P. Shingledecker, C.L. White: Metall. Mater. Trans., 2015, vol. 46A, pp. 2947-55.10.1007/s11661-015-2898-0 ↗
25. K. Hagihara, T. Nakano, Y. Umakoshi: Acta Mater., 2003, vol. 51, pp. 2623-37.10.1016/S1359-6454(03)00060-0 ↗
26. N.D. Evans, P.J. Maziasz, R.W. Swindeman, G.D. Smith:, Scr. Mater., 2004, vol. 51, pp. 503–7.10.1016/j.scriptamat.2004.05.047 ↗
27. F. Long, Y.S. Yoo, C.Y. Jo, S.M. Seo, Y.S. Song, T. Jin, Z.Q. Hu: Mater. Sci. Eng., 2009, vol. 527A, pp. 361–9.10.1016/j.msea.2009.09.016 ↗