journal article·2013-07

Achieving Al Melt/Carbon and Al-Ti Melts/Carbon Interfaces Wetting via Ultrasonic Couple Processing

Y. L. Li, T. G. Zhou

Publisher page

Abstract

Good wetting among Al, Al-Ti melts and C (carbon) solid was achieved by ultrasonic couple processing (UCP). Due to the action of interfacial tension of wetting, Al melt and Al-Ti melts climb along the side wall of C solid. The wetting angle at the triple junction of gaseous, liquid, and solid phases is all lower than 15 deg. In the meantime, good wetting between Al melt and C powder was also achieved by the ultrasonic couple processing. Al melt infiltrated into the interior of C powder through the capillarity. When the ultrasonic couple processing was applied in the system of wetting between Al-Ti melts and C powder, owing to the superimposed effect of incident acoustic wave and reflected acoustic wave at Al-Ti melts/C interface, local high temperature occurred in the Al-Ti melts near C interface, and the superimposed effect can effectively obstruct a direct reaction of Al melt and C, inhibit the formation of undesirable Al4C3, and promote dissolved Ti to react with C and dissociated C to form TiC particle phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. D. Qiu, J.A. Taylor, and M.X. Zhang: Mater. Sci. Eng., 2010, vol. A41, pp. 3412-21.
2. L. Yu, X.F. Liu, Z.Q. Wang, and X.F. Bian: J. Mater. Sci., 2005, vol. 40, pp. 3865-7.10.1007/s10853-005-2893-8 ↗
3. P. Moldovan and G. Popescu: Alum. Alloy, 2004, vol. 12, pp. 59-61.
4. X.W. Zeng, W.G. Zhang, N. Wei, and R.P. Liu: Mater. Sci. Eng., 2007, vol. A443, pp. 224-8.10.1016/j.msea.2006.08.030 ↗
5. B. Ranjit: Trans. Indian. Inst. Met., 2009, vol. 62, pp. 391-5.10.1007/s12666-009-0068-z ↗
6. N. Eustathopoulos, J.C. Joud, P. Desre, and J.M. Hicter: J. Mater. Sci., 1974, vol. 9, pp. 1233–42.10.1007/BF00551836 ↗
7. G.I. Eskin: Adv. Perform. Mater., 1997, vol. 4, pp. 223-32.10.1023/A:1008603815525 ↗
8. G.I. Eskin: Metallurgist, 2010, vol. 54, pp. 319-25.10.1007/s11015-010-9331-0 ↗
9. X.B. Han, Y.H. Qing, and T. Thomas: Mater. Sci. Eng. A, 2008, vol. 473, pp. 96-104.10.1016/j.msea.2007.04.040 ↗
10. L. Zhang, G.I. Eskin, and L. Katgerman: J. Mater. Sci., 2011, vol. 46, pp. 5252-9.10.1007/s10853-011-5463-2 ↗
11. Y.L. Li, F.R. Cao, Y.B. Chen, and H.K. Feng: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2178-83.10.1007/s11661-009-9927-9 ↗
12. Y.L. Li, H.K. Feng, F.R. Cao, and Y.B. Chen: Wuhan Univ. Technol.-Mater. Sci. Ed., 2008, vol. 3, pp. 319–22.
13. Y.L. Li, H.K. Feng, F.R. Cao, and Y.L. Gong: Mater. Sci. Eng. A, 2008, vol. 487, pp. 518-523.10.1016/j.msea.2007.11.067 ↗
14. Z.W. Xua, L. Ma, J. Yana, S. Yanga, and S. Dub: Compos. Part A, 2012, vol. 43, pp. 407-14.10.1016/j.compositesa.2011.12.006 ↗
15. A.R. Roberta and X.J. Zhang: Metall. Trans. A, 1991, vol. 2A, pp. 3071-5.
16. V. Laurent, D. Chatain, C. Chatillon, and N. Eustathopoulos: Acta Metall., 1988, vol. 36, pp. 1797-803.10.1016/0001-6160(88)90248-9 ↗