An Investigation on Phase Formations and Microstructures of Ni-rich Ni-Ti Shape Memory Alloy Thin Films
Source abstract
Abstract
Ni-rich Ni-Ti alloy thin films were fabricated by radio frequency (RF)-direct-current (DC) magnetron sputtering using elemental Ni and Ti as sputter targets. Si (100) was chosen as a substrate that was either held at room temperature or at 573 K (300 °C) during the depositions. The 380-nm-thick films were characterized by field emission scanning electron microscopy, energy dispersive spectroscopy, grazing incidence X-ray diffraction, atomic force microscopy, high-resolution transmission electron microscopy, and Vickers microhardness tester. The results suggests that because of the lack of surface mobility of the adatoms at the room temperature, the deposited films were smooth and amorphous, with a crystallite size of 15 nm accompanied with a porous morphology. At higher substrate temperatures, an increase in the surface diffusion leads to the formation of partially crystalline, rougher films with a denser, compact, fibrous grain microstructure. The formation of Ni-rich precipitates such as Ni4Ti3, Ni2Ti, and Ni3Ti along with small amount of the NiTi phase were attributed to the localized heating and cooling within the grains. Few grains exhibited band structures that are believed to be a result of type II twins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M. Kohl: Shape Memory Actuators: Microtechnology and MEMS Series, Springer, Berlin, Germany, 2004, pp. 25-26.10.1007/978-3-662-09875-2_3 ↗
2. J.A. Walker, K.J. Gabriel, and M. Mehregany: Sensor Actuator, 1990, vol. A21-23, pp. 243-46.10.1016/0924-4247(90)85047-8 ↗
3. A.D. Johnson: J. Micromech. Microeng., 1991, vol. 1, pp. 34-41.10.1088/0960-1317/1/1/007 ↗
4. Y. Fu, H. Du, W. Huang, S. Zhang, and M. Hu: Sensor Actuator, 2004, vol. A112, pp. 395-408.10.1016/j.sna.2004.02.019 ↗
5. S. Miyazaki and A. Ishida: Mater. Sci. Eng. A, 1999, vol. 273A, pp. 106-33.10.1016/S0921-5093(99)00292-0 ↗
6. S. Takabayashi, K. Tanino, and K. Kitagawa: Mater. Sci. Res. Int., 1997, vol. 3, pp. 220-24.
7. Y. Bellouard: Mater. Sci. Eng. A, 2008, vol. 481A, pp. 582-89.10.1016/j.msea.2007.02.166 ↗
8. C.L. Shih, B.K. Lai, H. Kahn, and S.M. Philiphs: JMEMS, 2001, vol. 10, pp. 69-79.
9. Y. Fu, H. Du, and S. Zhang: Thin Solid Films, 2003, vol. 444, pp. 85-90.10.1016/S0040-6090(03)01029-0 ↗
10. R.H. Wolf and A.H. Heuer: JMEMS, 1995, vol. 4, pp. 206-12.
11. A. Ishida, M. Sato, and S. Miyazaki: Mater. Sci. Eng. A, 1999, vol. 273A, pp. 754-57.10.1016/S0921-5093(99)00410-4 ↗
12. J.P. Chu, Y.W. Lai, T.N. Lin, and S.F. Wang: Mater. Sci. Eng. A, 2000, vol. 277A, pp. 11-17.10.1016/S0921-5093(99)00560-2 ↗
13. P. Surbled, C. Clerc, B.L. Pioufle, M. Ataka, and H. Fujita: Thin Solid Films, 2001, vol. 401, pp. 52-59.10.1016/S0040-6090(01)01634-0 ↗
14. A. Ohta, S. Bhansali, I. Kishimoto, and A. Umeda: Sensor Actuator, 2000, vol. 86, pp. 165-70.10.1016/S0924-4247(00)00449-0 ↗
15. S. Sanjabi, Y.Z. Cao, S.K. Sadrnezhaad, and Z.H. Barber: J. Vac. Sci. Technol., 2005, vol. 23A, pp. 1425-29.10.1116/1.2011404 ↗
16. P. Krulevitch, P.B. Ramsey, D.M. Makowiecki, A.P. Lee, M.A. Northrup, and C. Johnson: Thin Solid Films, 1996, vol. 274, pp. 101-15.10.1016/0040-6090(95)07072-9 ↗
17. A. Gyobu, Y. Kawamura, H. Horikawa, and T. Saburi: Mater. Trans., 1996, vol. 37, pp. 697-702.10.2320/matertrans1989.37.697 ↗
18. A. Ishida, M. Sato, A. Takei, and S. Miyazaki: Mater. Trans. JIM, 1995, vol. 36, p. 1349-55.10.2320/matertrans1989.36.1349 ↗
19. S. Kajiwara: Philos. Mag. Lett., 1996, vol. 74, pp. 137-44.10.1080/095008396180281 ↗
20. A. Ishida, M. Sato, A. Takei, K. Nomura, and S. Miyazaki: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3753-59.10.1007/BF02595624 ↗
21. A. Ishida, A. Takei, and S. Miyazaki: Thin Solid Films, 1993, vol. 228, pp. 210-14.10.1016/0040-6090(93)90600-T ↗
22. S. Stemmer, G. Duscher, C. Scheu, A.H. Heuer, and M. Ruhle: J. Mater. Res., 1997, vol. 12, pp. 1734-40.10.1557/JMR.1997.0239 ↗
23. J.Z. Chen and S.K. Wu: Thin Solid Films, 1999, vol. 339, pp. 194-99.10.1016/S0040-6090(98)01348-0 ↗
24. H. Qiu, Y. Tian, and M. Hahimoto: Vacuum, 2003, vol. 70, pp. 493-97.10.1016/S0042-207X(02)00543-2 ↗
25. S.K Wu, J.Z. Chen, Y.J. Wu, J.Y. Wang, M.N. Yu, F.R. Chen, and J.J. Kai: Philos. Mag. Lett., 2001, vol. 81A, pp. 1939-49.
26. S.K. Wu, J.J. Su, and J.Y. Wang: Philos. Mag. Lett., 2004, vol. 84, pp. 1209-18.10.1080/14786430310001646745 ↗
27. M. Nishida, T. Hara, Y. Morizono, A. Ikeya, H. Kijima, and A. Chiba: Acta Mater., 1997, vol. 45, pp. 4847-53.10.1016/S1359-6454(97)00162-6 ↗
28. F.F. Gong, H.M. Shen, and Y.N. Wang: Mater. Lett., 1995, vol. 25, pp. 13-16.10.1016/0167-577X(95)00136-0 ↗
29. A. Ishida, A. Takei, M. Sato, and S. Miyazaki: Thin Solid Films, 1996, vols. 281-282, pp. 337-39.10.1016/0040-6090(96)08634-8 ↗
30. K. Dehghani and A.A. Khamei: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 684-90.10.1016/j.msea.2009.08.059 ↗
31. Y. Nunomura, Y. Kaneno, H. Tsuda, and T. Takasugi: Intermetallics, 2004, vol. 12, pp. 389-99.10.1016/j.intermet.2003.12.011 ↗
32. J.A. Thornton: J. Vac. Sci. Technol., 1974, vol. 11, pp. 666-70.10.1116/1.1312732 ↗
33. J.A.Thornton: J. Vac. Sci. Technol., 1986, vol. 4A, 3059-65.10.1116/1.573628 ↗
34. T. Waitz, T. Antretter, F.D. Fischer, N.K. Simha, and H.P. Karnthaler: J. Mech. Phys. Solid, 2007, vol. 55, pp. 419-44.10.1016/j.jmps.2006.06.006 ↗
35. J.X. Zhang, M. Sato, and A. Ishida: Acta Mater., 2001, vol. 49, pp. 3001-10.10.1016/S1359-6454(01)00204-X ↗
36. X. Wang, Y. Bellouard, and J.J. Vlassak: Acta Mater., 2005, vol. 53, pp. 4955-61.10.1016/j.actamat.2005.07.022 ↗
37. B.G. Priyadarshini, S. Aich, and M. Chakraborty: Vacuum, in press.
38. K. Ashok, B. Subramanian, P. Kuppusami, and M. Jayachandran: Cryst. Res. Tech., 2009, vol. 44, pp. 511-16.10.1002/crat.200800630 ↗
39. P.H. Maryhofer, A. Horling, L. Karlson, J. Sjolen, T. Larsson, C. Mitterer, and L. Hultman: Appl. Phys. Lett., 2003, vol. 83, pp. 2049-51.10.1063/1.1608464 ↗