journal article·2014-02

Analysis of the Effect of Al on the Static Softening Kinetics of C-Mn Steels Using a Physically Based Model

Zaloa Aretxabaleta, Beatriz Pereda, Beatriz López

Publisher page

Abstract

The effect of Al addition on the static softening behavior of C-Mn steels was investigated. Double-hit torsion tests were performed at different deformation temperatures ranging from 1198 K to 1338 K (925 °C to 1065 °C) with pass strains of e = 0.2 and 0.35. It was found that solute Al produced a significant delay on the static softening kinetics. Additionally, at the lowest temperatures [1198 K to 1238 K (925 °C to 965 °C)] and highest Al level (2 wt pct), austenite to ferrite phase transformation was found to be concurrent with softening, leading this to higher softening retardation. The softening kinetics of the steels investigated were analyzed using a physically based model which couples recovery and recrystallization mechanisms. The main parameters of the model were identified for the present alloys. An expression for the grain boundary mobility of the base C-Mn steel was derived and the retarding effect of Al in solid solution on the static recrystallization kinetics was introduced in the model. Reasonable agreement was obtained between model and experimental results for a variety of deformation conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. C.M. Sellars: Mater. Sci. Technol., 1990, vol. 6, pp. 1072–81.10.1179/026708390790189966 ↗
2. A.I. Fernandez, P. Uranga, B. Lopez, J.M. Rodriguez-Ibabe: ISIJ Int., 2000, vol. 40, pp. 893-901.10.2355/isijinternational.40.893 ↗
3. P.D. Hogson, R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329-38.10.2355/isijinternational.32.1329 ↗
4. H.S. Zurob, C.R. Hutchinson, Y. Brechet, G. Purdy: Acta Mater., 2002, vol. 50, pp. 3075-92.10.1016/S1359-6454(02)00097-6 ↗
5. M.G. Akben, B. Bacroix, J.J. Jonas: Acta Metall., 1983, vol. 31, pp. 161-74.10.1016/0001-6160(83)90076-7 ↗
6. H.L. Andrade, M.G. Akben, J.J. Jonas: Metall. Trans. A, 1983, vol. 14A, pp. 1967-77.10.1007/BF02662364 ↗
7. N. Maruyama, R. Uemori, M. Sugiyama: Mater. Sci. Eng. A, 1998, vol. 250, pp. 2-7.10.1016/S0921-5093(98)00528-0 ↗
8. M. Gomez, C.I. Garcia, D.M. Haezebrouck, A.J. DeArdo: ISIJ Int., 2009, vol. 49, pp. 302-11.10.2355/isijinternational.49.302 ↗
9. M. De Meyer, D. Vanderschueren, B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813-22.10.2355/isijinternational.39.813 ↗
10. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. van Huumbeeck, F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061-67.10.2355/isijinternational.41.1061 ↗
11. A.K. Srivastava, D. Bhattacharjee, G. Jha, N. Gope, S.B. Singh: Mater. Sci. Eng. A, 2007, vol. 445-446, pp. 549-57.10.1016/j.msea.2006.09.101 ↗
12. E.I. Poliak and F. Siciliano: MS&T 2004 Conference Proceedings, New Orleans, 2004, pp. 39–45.
13. P.P. Suikkanen, V.T.E. Lang, M.C. Somani, D.A. Porter, L.P. Karjalainen: ISIJ Int., 2012, vol. 52, pp. 471-76.10.2355/isijinternational.52.471 ↗
14. A.I. Fernandez, B. Lopez, J.M. Rodriguez-Ibabe: Scripta Mater., 1999, vol. 40, pp. 543-49.10.1016/S1359-6462(98)00452-7 ↗
15. Thermodynamic Database TCFE6 – TCS Steels/Fe-Alloys Database, Thermo-Calc.
16. G. Glover, C.M. Sellars: Metall. Trans., 1972, vol. 3, pp. 2271-80.10.1007/BF02643242 ↗
17. E.J. Giordani, A.M. Jorge, O. Balancin: Scripta Mater., 2006, vol. 55, pp. 743-46.10.1016/j.scriptamat.2006.05.015 ↗
18. K.B. Kang, O. Kwon, W.B. Lee, C.G. Park: Scripta Mater., 1997, vol. 36, pp. 1303-08.10.1016/S1359-6462(96)00359-4 ↗
19. J.H. Beynon, C.M. Sellars: ISIJ Int., 1992, vol. 32, pp. 359-67.10.2355/isijinternational.32.359 ↗
20. R. Abad, A.I. Fernandez, B. Lopez, J.M. Rodriguez-Ibabe: ISIJ Int., 2001, vol. 41, pp. 1373-82.10.2355/isijinternational.41.1373 ↗
21. Z. Aretxabaleta, B. Pereda, S.V. Parker, and B. Lopez: in Proceedings of 4th International Conference on Thermomechanical Processing of Steels, Sheffield, 2012.
22. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st edition, Oxford, Pergamon Press, 1995, pp. 188-95.
23. G. Saada: Acta Metall., 1960, vol. 8, pp. 841-47.10.1016/0001-6160(60)90150-4 ↗
24. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, 1982, pp. 60–70.
25. M. Verdier, Y. Brechet, P. Guyot: Acta Mater., 1999, vol. 47, pp. 127-34.10.1016/S1359-6454(98)00350-4 ↗
26. E. Nes: Prog. Mater. Sci., 1998, vol. 41, pp. 129-93.10.1016/S0079-6425(97)00032-7 ↗
27. E. Nes: Acta Metall. Mater., 1995, vol. 43, pp. 2189-207.10.1016/0956-7151(94)00409-9 ↗
28. A. Yoshie, T. Fujita, M. Fujioka, K. Okamoto, H. Morikawa: ISIJ Int., 1996, vol. 36, pp. 467-473.10.2355/isijinternational.36.467 ↗
29. S. Sarkar, M. Militzer: Mater. Sci. Technol., 2009, vol. 25, pp. 1134-46.10.1179/174328409X453271 ↗
30. A. Smith, A. Miroux, J. Sietsma, S. Van Der Zwaag: Steel Res., 2006, vol. 77, pp. 595-602.10.1002/srin.200606435 ↗
31. G. Arieta, C.M. Sellars: Scr. Metall. Mater., 1994, vol. 30, pp. 707-12.10.1016/0956-716X(94)90186-4 ↗
32. H. Zurob: Ph.D. Thesis, McMaster University, Canada, 2003.
33. D. Turnbull: Trans. Am. Inst. Min. Eng., 1951, vol. 191, pp. 661-65.
34. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
35. E.A. Simielli, S. Yue, J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 597-608.10.1007/BF02801177 ↗
36. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, Oxford, Oxford University Press, 1953, p. 57.
37. H.S. Zurob, C.R. Hutchinson, Y. Brechet, G.R. Purdy: Mater. Sci. Eng. A, 2004, vol. 382A, pp. 64-81.10.1016/j.msea.2004.04.024 ↗
38. C. Iparragirre, A.I. Fernandez, J.M. Rodriguez-Ibabe, B. Lopez: Mater. Sci. Forum, 2007, vol. 539-543, pp. 4119-24.10.4028/www.scientific.net/MSF.539-543.4119 ↗
39. M. Gomez, L. Rancel, S.F. Medina: Mater. Sci. Eng. A, 2009, vol. 506A, pp. 165-73.10.1016/j.msea.2008.11.049 ↗
40. V. Burachinsky, J.R. Cahoon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 563-82.10.1007/s11661-997-0043-4 ↗
41. L. Lissel, G. Engberg, and U. Borggren: in Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, 2008, Associazione Italiana di Metallurgia, Padua, 2001.
42. J.J. Jonas: in Proceedings of international Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, THERMEC-88, Tokyo, 1988, pp. 59–69.
43. J.J. Jonas, in: Dunne DP and Chandra T (eds.), High Strength Low Alloy Steels, Wollongong, University of Wollongong, 1984, pp. 80-91.
44. H.J. McQueen, S. Yue, N.D. Ryan, E. Fry: J. Mater. Process. Technol., 1995, vol. 53, pp. 293-310.10.1016/0924-0136(95)01987-P ↗
45. M. Oyarzabal, A. Martinez de Guerenu, I. Gutierrez: Mater. Sci. Eng. A, 2008, vol. 485A, pp. 200-09.10.1016/j.msea.2007.07.077 ↗