Catastrophic Oxidation of Copper: A Brief Review
Source abstract
Abstract
A brief review of the current understanding of copper accelerated oxidation in the presence of low-melting oxides (Bi2O3, MoO3, and V2O5) is given. Special attention is paid to the kinetics, thermodynamics, and mechanisms of accelerated oxidation of copper. The mechanisms of two stages (fast and superfast) of the copper accelerated oxidation are considered. It is shown that the fast oxidation of copper occurs by a diffusion mechanism. Oxygen diffusion along the liquid channels in the oxide scale is the rate-limiting step in the overall mechanism. The superfast oxidation of copper occurs by a fluxing mechanism. Realization of the particular mechanism depends on the mass ratio of low-melting oxide to the metal. The mass ratios of low-melting oxide to the metal and the oxygen partial pressures for superfast oxidation of copper are established. A model of the fast oxidation of copper is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Advancements in Solid Oxide Fuel Cells · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. V.V. Belousov: Oxid. Met., 1994, vol. 42, pp. 511–27.10.1007/BF01046763 ↗
2. V.V. Belousov: Protect. Met., 1994, vol. 30, pp. 599–604.
3. J.R. Davis: Copper and Copper Alloys, ASM International Handbook Committee, Materials Park, OH, 2001.
4. J.L. Meijering and G.W. Rathenau: Nature, 1950, vol. 165, pp. 240–41.10.1038/165240a0 ↗
5. G.W. Rathenau and J.L. Meijering: Metallurgia, 1950, vol. 42, pp. 167–73.
6. N. Birks G.H. Meier, and F.S. Pettit: Introduction to the High-Temperature Oxidation of Metals, 2nd ed., Cambridge University Press, New York, NY, 2006.10.1017/CBO9781139163903 ↗
7. R.V. MacVay, P. Williams, G.H. Meier, F.S. Pettit, and J.L. Smialek: Superalloys ’92, S.D. Antolovich, ed., TMS-AIME Symposium, Seven Springs, PA, 1992, pp. 807–16.10.7449/1992/Superalloys_1992_807_816 ↗
8. H.J. Grabke, D. Wiemer, and H. Viefhaus: Appl. Surf. Sci., 1991, vol. 47, pp. 243–50.10.1016/0169-4332(91)90038-L ↗
9. P.Y. Hou and J. Stringer: Oxid. Met., 1992, vol. 38, pp. 323–45.10.1007/BF00665658 ↗
10. H.J. Grabke, G. Kurbatov, and H.J. Schmutzler: Oxid. Met., 1995, vol. 43, pp. 97–114.10.1007/BF01046749 ↗
11. P.Y. Hou and J. Stringer: Mater. Sci. Eng. A, 1995, vol. A202, pp. 1–10.10.1016/0921-5093(95)09798-8 ↗
12. H. Singh, D. Puri, and S. Prakash: Rev. Mater. Sci., 2007, vol. 16, pp. 27–50.
13. H. Sidhu, S. Prakash, and R.D. Agrawal: Curr. Sci., 2006, vol. 90, pp. 41–47.
14. R.A. Rapp: Pure Appl. Chem., 1990, vol. 62, pp. 113–22.10.1351/pac199062010113 ↗
15. R.A. Rapp: JOM, 1994, vol. 46, pp. 47–55.10.1007/BF03222665 ↗
16. J. Stringer: High Temperature Corrosion, NACE-6, R.A. Rapp, ed., National Association of Corrosion Engineers, Houston, TX, 1983, pp. 389–97.
17. R.A. Rapp: Corros. Sci., 2002, vol. 44, pp. 209–21.10.1016/S0010-938X(01)00057-9 ↗
18. W. Gao and Z. Li: Developments in High Temperature Corrosion and Protection of Materials, Woodhead Publishing Limited, Cambridge, U.K., 2008.10.1201/9781439832691 ↗
19. D.J. Young: High Temperature Oxidation and Corrosion of Metals, Elsevier, Atlanta, GA, 2008.
20. M. Kutz: Handbook of Environmental Degradation of Materials, William Andrew Publishing, New York, NY, 2005.
21. H.J. Grabke: Corrosion, 2000, vol. 56, pp. 801–08.10.5006/1.3280583 ↗
22. H.J. Grabke, S. Strauss, and D. Vogel: Mater. Corr., 2003, vol. 54, pp. 895–902.10.1002/maco.200303730 ↗
23. D.A. Shifler: High Temperature Gaseous Corrosion Testing, ASM Handbook, ASM International, Materials Park, OH, 2003, vol. 13A, pp. 650–81.10.31399/asm.hb.v13a.a0003671 ↗
24. D.M. Smyth: Defect Chemistry of Metal Oxides, Oxford University Press, Oxford, UK, 2000.
25. A. Atkinson, R.I. Taylor, and A.E. Hughes: Phil. Mag., 1982, vol. A45, pp. 823–33.10.1080/01418618208239905 ↗
26. A. Atkinson, D.P. Moon, D.W. Smart, and R.I. Taylor: J. Mater. Sci., 1986, vol. 21, pp. 1747–53.10.1007/BF01114735 ↗
27. R.J. Hussey and M.J. Graham: Oxid. Met., 1996, vol. 45, pp. 349–74.10.1007/BF01046989 ↗
28. R. Prescott and M.J. Graham: Oxid. Met., 1992, vol. 38, pp. 233–54.10.1007/BF00666913 ↗
29. V.V. Belousov and B.S. Bokschtein: Oxid. Met., 1998, vol. 50, pp. 393–98.10.1023/A:1018852708009 ↗
30. V.V. Belousov and B.S. Bokschtein: Protect. Met., 1998, vol. 34, pp. 36–38.
31. V.V. Belousov: Russ. Chem. Rev., 1998, vol. 67, pp. 563–71.10.1070/RC1998v067n07ABEH000374 ↗
32. V.V. Belousov: Oxid. Met., 2007, vol. 67, pp. 235–50.10.1007/s11085-007-9054-1 ↗
33. V.V. Belousov: Russ. J. Phys. Chem., 2008, vol. A82, pp. 79–85.
34. V.V. Belousov: Corros. Sci., 2010, vol. 52, pp. 68–71.10.1016/j.corsci.2009.08.044 ↗
35. V.V. Belousov and S.V. Fedorov: Russ. Chem. Rev., 2012, vol. 81, pp. 44–64.10.1070/RC2012v081n01ABEH004209 ↗
36. C. Wagner: Z. Phys. Chem., 1936, vol. 32, pp. 447–62.10.1515/zpch-1936-3239 ↗
37. A.A. Klimashin and V.V. Belousov: Corros. Sci., 2011, vol. 53, pp. 3150–55.10.1016/j.corsci.2011.05.058 ↗
38. A.A. Klimashin and V.V. Belousov: Oxid. Met., 2011, vol. 76, pp. 359–66.10.1007/s11085-011-9260-8 ↗
39. V.V. Belousov: Oxid. Met., 1992, vol. 38, pp. 289–98.10.1007/BF00666916 ↗
40. B. Hallstedt, D. Risold, and L.G. Gauckler: J. Am. Ceram. Soc., 1996, vol. 79, pp. 353–58.10.1111/j.1151-2916.1996.tb08128.x ↗
41. M.P. Kulakov and D.Y. Lenchinenko: Thermochim. Acta, 1991, vol. 188, pp. 129–32.10.1016/0040-6031(91)80210-A ↗
42. S.V. Fedorov, V.V. Belousov, and A.V. Vorobiev: J. Electrochem. Soc., 2008, vol. 155, pp. F241–44.10.1149/1.2990701 ↗
43. V.V. Belousov, S.V. Fedorov, and A.V. Vorobiev: J. Electrochem. Soc., 2011, vol. 158, pp. B601–04.10.1149/1.3561425 ↗
44. V.V. Belousov: J. Am. Ceram. Soc., 1996, vol. 79, pp. 1703–06.10.1111/j.1151-2916.1996.tb08789.x ↗
45. V.V. Belousov: Russ. J. Electrochem., 1995, vol. 31, pp. 1240–44.
46. V.V. Belousov: J. Mater. Sci., 2005, vol. 40, pp. 2361–65.10.1007/s10853-005-1959-y ↗
47. V.V. Belousov: Colloid. J., 2004, vol. 66, pp. 121–27.10.1023/B:COLL.0000023110.23942.6c ↗
48. V.V. Belousov: J. Supercond., 2002, vol. 15, pp. 207–10.10.1023/A:1016001201807 ↗
49. V.V. Belousov: Inorg. Mater., 2003, vol. 39, pp. 82–89.10.1023/A:1021851522073 ↗
50. N.V. Lyskov, Y.G. Metlin, V.V. Belousov, and Y.D. Tretyakov: Solid State Ionics, 2004, vol. 166, pp. 207–11.10.1016/j.ssi.2003.10.008 ↗
51. N.V. Lyskov, Y.G. Metlin, V.V. Belousov, and Y.D. Tretyakov: Solid State Ionics, 2004, vol. 173, pp. 135–39.10.1016/j.ssi.2004.07.064 ↗
52. N.V. Lyskov, Y.G. Metlin, V.V. Belousov, and Y.D. Tretyakov: Dokl. Chem., 2003, vol. 392, pp. 229–32.10.1023/A:1025793329932 ↗
53. V.V. Belousov: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 3459–67.10.1016/j.jeurceramsoc.2007.01.014 ↗
54. V.V. Belousov: Russ. J. Phys. Chem., 2007, vol. 81, pp. 441–50.10.1134/S0036024407030260 ↗
55. V.V. Belousov: JETP Lett., 2008, vol. 88, pp. 259–60.10.1134/S0021364008160078 ↗
56. I. Kulbakin, V. Belousov, S. Fedorov, and A. Vorobiev: Mater. Lett., 2012, vol. 67, pp. 139–41.10.1016/j.matlet.2011.09.034 ↗