Using the Ti–Al System to Understand Plasticity and Its Connection to Fracture and Fatigue in α Ti Alloys
Source abstract
Abstract
The Ti–Al system, specifically with Al wt pct ranging from approximately 4 to 14 pct, has served as a model system for exploring the deformation behavior of the hexagonal close-packed α phase of Ti alloys. The system has enabled exploration of nearly all aspects of deformation and failure across length scales from atoms to the continuum, in addition to being of value for both experimental and model method development. Here, we provide a review of what has been learned over the past 60 years on fundamental Ti deformation behavior using the model Ti–Al system including topics such as dislocation motion, crystallographic slip, grain-scale deformation, creep, and fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. B. Stiller, T. Bocek, F. Hecht, G. Machado, P. Racz, M. Waldburger, Accident to the Airbus A380 registered F-HPJE and operated by air france on 30/09/2017 en route over Greenland, Tech. rep., Bureau d’Enquˆetes et d’Analyses pour la S´ecurit´e de l’Aviation Civile, 2019.
2. A. Churchman: Proc. R. Soc. Lond. Ser. A, 1954, vol. 226(1165), pp. 216–26.10.1098/rspa.1954.0250 ↗
3. G. Lutjering and J. Williams: Titanium, Springer, Cham, 2007.
4. R. Jaffee: Prog. Met. Phys., 1958, vol. 7, pp. 65–163.10.1016/0502-8205(58)90004-2 ↗
5. R. Adebisi, S. Sathish, A. Pilchak, P. Shade, Elastic constants of α Ti-7Al measured using resonant ultrasound spectroscopy, in: AIP Conference Proceedings, Vol. 1706, AIP Publishing LLC, 2016, p. 070005.10.1063/1.4940523 ↗
6. J. Kwon, M. Brandes, P.S. Phani, A. Pilchak, Y. Gao, E.P. George, G.M. Pharr, and M. Mills: Acta Mater., 2013, vol. 61(13), pp. 4743–56.10.1016/j.actamat.2013.05.005 ↗
7. J. Stinville, T. Francis, A. Polonsky, C. Torbet, M. Charpagne, Z. Chen, G. Balbus, F. Bourdin, V. Valle, P. Callahan, et al.: Exp. Mech., 2021, vol. 61(2), pp. 331–48.10.1007/s11340-020-00632-2 ↗
8. S. Zhao, R. Zhang, Y. Chong, X. Li, A. Abu-Odeh, E. Rothchild, D.C. Chrzan, M. Asta, J. Morris Jr., and A.M. Minor: Nat. Mater., 2021, vol. 20(4), pp. 468–72.10.1038/s41563-020-00817-z ↗
9. M. Charpagne, J. Stinville, A. Polonsky, M. Echlin, and T. Pollock: JOM, 2021, vol. 73, pp. 3263–71.10.1007/s11837-021-04894-6 ↗
10. R. Sperry, S. Han, Z. Chen, S.H. Daly, M.A. Crimp, and D.T. Fullwood: Mater. Charact., 2021, vol. 173, 110941.10.1016/j.matchar.2021.110941 ↗
11. P.R. Dawson, M.P. Miller, T.M. Pollock, J. Wendorf, L.H. Mills, J.C. Stinville, M.A. Charpagne, and M.P. Echlin: Integr. Mater. Manuf. Innov., 2021, vol. 10, pp. 265–85.10.1007/s40192-021-00206-7 ↗
12. D.K. Jangid, N.R. Brodnik, M.G. Goebel, A. Khan, S. Majeti, M.P. Echlin, S.H. Daly, T.M. Pollock, and B. Manjunath: npj Comput. Mater., 2022, vol. 8(1), p. 255.10.1038/s41524-022-00924-2 ↗
13. K.E. Nygren, D.C. Pagan, J.V. Bernier, and M.P. Miller: Mater. Charact., 2020, vol. 165, 110366.10.1016/j.matchar.2020.110366 ↗
14. H. Ogden, D. Maykuth, W. Finlay, and R. Jaffee: JOM, 1951, vol. 3(12), pp. 1150–55.10.1007/BF03397426 ↗
15. H. Okamoto, T. Massalski, et al.: Binary Alloy Phase Diagrams, ASM International, Materials Park, 1983, p. 12.
16. J. Lim, C. McMahon, D. Pope, and J. Williams: Metall. Trans. A, 1976, vol. 7A, pp. 139–44.10.1007/BF02644050 ↗
17. P. Bagot, A. Radecka, A. Magyar, Y. Gong, D. Bell, G. Smith, M. Moody, D. Dye, and D. Rugg: Scripta Mater., 2018, vol. 148, pp. 24–28.10.1016/j.scriptamat.2018.01.015 ↗
18. A. Venkataraman, P.A. Shade, R. Adebisi, S. Sathish, A.L. Pilchak, G.B. Viswanathan, M.C. Brandes, M.J. Mills, and M.D. Sangid: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2222–36.10.1007/s11661-017-4024-y ↗
19. B. Zhao, P. Huang, L. Zhang, S. Li, Z. Zhang, and Q. Yu: Sci. Rep., 2020, vol. 10(1), p. 3086.10.1038/s41598-020-60013-6 ↗
20. A. Fitzner, D.L. Prakash, J.Q. Da Fonseca, M. Thomas, S.-Y. Zhang, J. Kelleher, P. Manuel, and M. Preuss: Acta Mater., 2016, vol. 103, pp. 341–51.10.1016/j.actamat.2015.09.048 ↗
21. A. Fitzner, M. Thomas, J. Q. D. Fonseca, S.-Y. Zhang, J. Kelleher, M. Preuss, The effect of aluminium on deformation and twinning in alpha titanium: the ND case, in: Proceedings of the 13th World Conference on Titanium, Wiley Online Library, 2016, pp. 1051–55.10.1002/9781119296126.ch178 ↗
22. A. Radecka, P. Bagot, T. Martin, J. Coakley, V. Vorontsov, M. Moody, H. Ishii, D. Rugg, and D. Dye: Acta Mater., 2016, vol. 112, pp. 141–49.10.1016/j.actamat.2016.03.080 ↗
23. F.F. Dear, P. Kontis, B. Gault, J. Ilavsky, D. Rugg, and D. Dye: Acta Mater., 2021, vol. 212, 116811.10.1016/j.actamat.2021.116811 ↗
24. G. Sargent and H. Conrad: Scr. Metall., 1970, vol. 4(2), pp. 129–33.10.1016/0036-9748(70)90178-X ↗
25. H. Rosenberg and W. Nix: Metall. Trans., 1973, vol. 4(5), pp. 1333–38.10.1007/BF02644529 ↗
26. T. Sakai and M. Fine: Scr. Metall., 1974, vol. 8(5), pp. 545–47.10.1016/0036-9748(74)90066-0 ↗
27. T. Sakai and M. Fine: Acta Metall., 1974, vol. 22(11), pp. 1359–72.10.1016/0001-6160(74)90036-4 ↗
28. H. Conrad: Scr. Metall., 1973, vol. 7(5), pp. 509–12.10.1016/0036-9748(73)90104-X ↗
29. U. Lienert, M. Brandes, J.V. Bernier, J. Weiss, S. Shastri, M. Mills, and M. Miller: Mater. Sci. Eng. A, 2009, vol. 524(1–2), pp. 46–54.10.1016/j.msea.2009.06.047 ↗
30. A. Radecka, J. Coakley, I.P. Jones, D. Rugg, T.C. Lindley, and D. Dye: Mater. Sci. Eng. A, 2016, vol. 650, pp. 28–37.10.1016/j.msea.2015.09.070 ↗
31. R. Zhang, S. Zhao, C. Ophus, Y. Deng, S.J. Vachhani, B. Ozdol, R. Traylor, K.C. Bustillo, J. Morris Jr., D.C. Chrzan, et al.: Sci. Adv., 2019, vol. 5(12), pp. 1–7.10.1126/sciadv.aax2799 ↗
32. D. Truax and C. McMahon Jr.: Mater. Sci. Eng., 1974, vol. 13(2), pp. 125–39.10.1016/0025-5416(74)90181-5 ↗
33. B. Barkia, J. Couzinie, S. Lartigue-Korinek, I. Guillot, and V. Doquet: Mater. Sci. Eng. A, 2017, vol. 703, pp. 331–39.10.1016/j.msea.2017.07.040 ↗
34. Q. Yu, L. Qi, T. Tsuru, R. Traylor, D. Rugg, J.W. Morris, M. Asta, D.C. Chrzan, and A.M. Minor: Science, 2015, vol. 347(6222), pp. 635–39.10.1126/science.1260485 ↗
35. Y. Chong, R. Zhang, M.S. Hooshmand, S. Zhao, D.C. Chrzan, M. Asta, J. Morris Jr., and A.M. Minor: Nat. Commun., 2021, vol. 12(1), p. 6158.10.1038/s41467-021-26374-w ↗
36. D. Shih, I. Robertson, and H. Birnbaum: Acta Metall., 1988, vol. 36(1), pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
37. G. Groves and A. Kelly: Philos. Mag., 1963, vol. 8(89), pp. 877–87.10.1080/14786436308213843 ↗
38. J. Williams and M. Blackburn: Physica Status Solidi (b), 1968, vol. 25(1), pp. K1-K3.10.1002/pssb.19680250146 ↗
39. J. Williams, R. Baggerly, and N. Paton: Metall. Mater. Trans. A, 2002, vol. 33A(3), pp. 837–50.10.1007/s11661-002-0153-y ↗
40. R. Papirno, G. Gerard, Investigation of the Creep Buckling Behavior of Columns: Elevated temperature properties of the test material Ti-7Al-4Mo Titanium Alloy, Vol. 59, Wright Air Development Center, Air Research and Development Command, United States, 1960.
41. H. L. Price, G. J. Heimerl, Tensile and Compressive Creep of 6Al-4V Titanium-alloy Sheet and Methods for Estimating the Minimum Creep Rate, National Aeronautics and Space Administration, 1961.
42. M. Brandes, Deformation of alpha and alpha-beta titanium alloys at ambient temperature, Ph.D. thesis, The Ohio State University, Ohio State (2008).
43. K. May, Small scale tensile testing of titanium alloys, Master’s thesis, The Ohio State University (2010).
44. T. Neeraj, M. Savage, J. Tatalovich, L. Kovarik, R. Hayes, and M. Mills: Philos. Mag., 2005, vol. 85(2–3), pp. 279–95.10.1080/14786430412331315707 ↗
45. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46(3), pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
46. M.D. Uchic and D.M. Dimiduk: Mater. Sci. Eng. A, 2005, vol. 400, pp. 268–78.10.1016/j.msea.2005.03.082 ↗
47. Q. Sun, Q. Guo, X. Yao, L. Xiao, J.R. Greer, and J. Sun: Scripta Mater., 2011, vol. 65(6), pp. 473–76.10.1016/j.scriptamat.2011.05.033 ↗
48. J. Gong and A.J. Wilkinson: Acta Mater., 2009, vol. 57(19), pp. 5693–5705.10.1016/j.actamat.2009.07.064 ↗
49. T. Neeraj and M. Mills: Mater. Sci. Eng. A, 2001, vol. 319, pp. 415–19.10.1016/S0921-5093(01)01045-0 ↗
50. A. Chakraborty, C. Zhang, S. Balachandran, T.R. Bieler, and P. Eisenlohr: Acta Mater., 2020, vol. 184, pp. 241–53.10.1016/j.actamat.2019.11.023 ↗
51. Z. Zhao, M.R. Ruiz, J. Lu, M.A. Monclus, J.M. Molina-Aldareguıa, T.R. Bieler, and P. Eisenlohr: Exp. Mech., 2022, vol. 62(5), pp. 731–43.10.1007/s11340-021-00813-7 ↗
52. W. Roberts, J. Gong, A.J. Wilkinson, and E. Tarleton: Scripta Mater., 2020, vol. 178, pp. 119–23.10.1016/j.scriptamat.2019.11.002 ↗
53. D.C. Pagan, P.A. Shade, N.R. Barton, J.-S. Park, P. Kenesei, D.B. Menasche, and J.V. Bernier: Acta Mater., 2017, vol. 128, pp. 406–17.10.1016/j.actamat.2017.02.042 ↗
54. M.P. Miller, D.C. Pagan, A.J. Beaudoin, K.E. Nygren, and D.J. Shadle: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 4360–76.10.1007/s11661-020-05888-w ↗
55. D.C. Pagan, J.V. Bernier, D. Dale, J.P. Ko, T.J. Turner, B. Blank, and P.A. Shade: Scripta Mater., 2018, vol. 142, pp. 96–100.10.1016/j.scriptamat.2017.08.029 ↗
56. H. Li, D. Mason, T. Bieler, C. Boehlert, and M. Crimp: Acta Mater., 2013, vol. 61(20), pp. 7555–67.10.1016/j.actamat.2013.08.042 ↗
57. U. Lienert, S. Li, C. Hefferan, J. Lind, R. Suter, J. Bernier, N. Barton, M. Brandes, M. Mills, M. Miller, et al.: JOM, 2011, vol. 63(7), pp. 70–77.10.1007/s11837-011-0116-0 ↗
58. K. Chatterjee, A. Venkataraman, T. Garbaciak, J. Rotella, M. Sangid, A. Beaudoin, P. Kenesei, J. Park, and A. Pilchak: Int. J. Solids Struct., 2016, vol. 94, pp. 35–49.10.1016/j.ijsolstr.2016.05.010 ↗
59. M.D. Sangid, T. Ezaz, and H. Sehitoglu: Mater. Sci. Eng. A, 2012, vol. 542, pp. 21–30.10.1016/j.msea.2012.02.023 ↗
60. M.D. Sangid, J. Rotella, D. Naragani, J.-S. Park, P. Kenesei, and P.A. Shade: Acta Mater., 2020, vol. 201, pp. 36–54.10.1016/j.actamat.2020.09.051 ↗
61. J. Rotella, A.L. Pilchak, and M.D. Sangid: Mater. Charact., 2021, vol. 182, 111552.10.1016/j.matchar.2021.111552 ↗
62. N. Vigano and W. Ludwig: Curr. Opin. Solid State Mater. Sci., 2020, vol. 24(4), 100832.10.1016/j.cossms.2020.100832 ↗
63. J. Stinville, W. Ludwig, P. Callahan, M. Echlin, V. Valle, T. Pollock, and H. Proudhon: Mater. Charact., 2022, vol. 188, 111891.10.1016/j.matchar.2022.111891 ↗
64. T. Lee, I. Robertson, and H. Birnbaum: Metall. Trans. A, 1990, vol. 21A(9), pp. 2437–47.10.1007/BF02646988 ↗
65. D.C. Pagan, K.E. Nygren, and M.P. Miller: Acta Mater., 2021, vol. 221, 117372.10.1016/j.actamat.2021.117372 ↗
66. R. Zeyfang, R. Martin, and H. Conrad: Mater. Sci. Eng., 1971, vol. 8(3), pp. 134–40.10.1016/0025-5416(71)90051-6 ↗
67. R. Hayes, G. Viswanathan, and M. Mills: Acta Mater., 2002, vol. 50(20), pp. 4953–63.10.1016/S1359-6454(02)00279-3 ↗
68. B.C. Odegard and A.W. Thompson: Metall. Mater. Trans. B, 1974, vol. 5B(5), pp. 1207–13.10.1007/BF02644335 ↗
69. M. Imam and C.M. Gilmore: Metall. Trans. A, 1979, vol. 10A(4), pp. 419–25.10.1007/BF02697068 ↗
70. F. Dunne and D. Rugg: Fatigue Fract. Eng. Mater. Struct., 2008, vol. 31(11), pp. 949–58.10.1111/j.1460-2695.2008.01284.x ↗
71. T. Neeraj, D.-H. Hou, G. Daehn, and M. Mills: Acta Mater., 2000, vol. 48(6), pp. 1225–38.10.1016/S1359-6454(99)00426-7 ↗
72. J. Moon, S. Karthikeyan, B. Morrow, S. Fox, and M. Mills: Mater. Sci. Eng. A, 2009, vol. 510, pp. 35–41.10.1016/j.msea.2008.10.060 ↗
73. J.C. Schuren, P.A. Shade, J.V. Bernier, S.F. Li, B. Blank, J. Lind, P. Kenesei, U. Lienert, R.M. Suter, T.J. Turner, D.M. Dimiduk, and J. Almer: Curr. Opin. Solid State Mater. Sci., 2015, vol. 19(4), pp. 235–44.10.1016/j.cossms.2014.11.003 ↗
74. Y. Bao and T. Wierzbicki: Int. J. Mech. Sci., 2004, vol. 46(1), pp. 81–98.10.1016/j.ijmecsci.2004.02.006 ↗
75. D.M. Dimiduk, C. Woodward, R. LeSar, and M.D. Uchic: Science, 2006, vol. 312(5777), pp. 1188–90.10.1126/science.1123889 ↗
76. J. Weiss, T. Richeton, F. Louchet, F. Chmelik, P. Dobron, D. Entemeyer, M. Lebyodkin, T. Lebedkina, C. Fressengeas, and R.J. Mcdonald: Phys. Rev. B, 2007, vol. 76(22), 224110.10.1103/PhysRevB.76.224110 ↗
77. K. Chatterjee, A. Beaudoin, D. Pagan, P. Shade, H. Philipp, M. Tate, S. Gruner, P. Kenesei, and J.-S. Park: Struct. Dyn., 2019, vol. 6(1), 014501.10.1063/1.5068756 ↗
78. A. Beaudoin, P. Shade, J. Schuren, T. Turner, C. Woodward, J. Bernier, S. Li, D. Dimiduk, P. Kenesei, and J.-S. Park: Phys. Rev. B, 2017, vol. 96(17), 174116.10.1103/PhysRevB.96.174116 ↗
79. F.F. Worsnop, R.E. Lim, J.V. Bernier, D.C. Pagan, Y. Xu, T.P. McAuliffe, D. Rugg, and D. Dye: Nat. Commun., 2022, vol. 13(1), p. 5949.10.1038/s41467-022-33437-z ↗
80. J. Hall, J. F. Garvey, SNTSB: Safety board recommendation A-98-27; 1998. https://www.ntsb.gov/safety/safety-recs/recletters/A98_27_33.pdf
81. J. F. Garvey, Safety recommendation A-00-104, 2000. https://www.ntsb.gov/safety/safety-recs/recletters/A00_104.pdf
82. National Transportation Safety Board, Project summary: Aviation investigation – 13 docket items - DCA18IA092 (2020). URL https://data.ntsb.gov/Docket?ProjectID=96738
83. H.-M. Kim, The effect of slip character on low-cycle fatigue behavior of Ti–Al alloys, Ph.D. thesis, Carnegie Mellon University, 1981.
84. H. Kim and J. Williams: The Effects of Composition and Temperature on the Dislocation Structure of Cyclically Deformed Ti–Al Alloys. Strength of Metals and Alloys (IC-SMA 6), Elsevier, Amsterdam, 1982, pp. 1231–36.
85. J. A. Allison, The influence of slip character and microstructure on fatigue crack growth in alpha and alpha + beta titanium alloys, Ph.D. thesis, Carnegie Mellon University, 1982.
86. J. Allison and J. Williams: Scr. Metall., 1985, vol. 19(6), pp. 773–78.10.1016/0036-9748(85)90043-2 ↗
87. J. M. Larsen, The effects of slip character and crack closure on the growth of small fatigue cracks in titanium-aluminium alloys, Ph.D. thesis, Carnegie Mellon University, 1990.
88. J. Larsen and J. Jira: Exp. Mech., 1991, vol. 31(1), pp. 82–87.10.1007/BF02325729 ↗
89. M. Brandes, M. Mills, and J. Williams: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3463–72.10.1007/s11661-010-0407-z ↗
90. A.L. Pilchak: Scripta Mater., 2014, vol. 74, pp. 68–71.10.1016/j.scriptamat.2013.10.024 ↗
91. A.L. Pilchak: Scripta Mater., 2013, vol. 68(5), pp. 277–80.10.1016/j.scriptamat.2012.10.041 ↗
92. V. Sinha, M. Mills, and J. Williams: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2015–26.10.1007/s11661-006-0144-5 ↗
93. G. M. Hommer, Mechanism of dwell fatigue crack initiation in Ti-7Al under biaxial tension-tension loads, Ph.D. thesis, Colorado School of Mines (2018).
94. G. Hommer, J.-S. Park, Z. Brunson, J. Dahal, P. Kenesei, A. Mashayekhi, J. Almer, J. Vignes, S. Lemmer, B. Clausen, et al.: Exp. Mech., 2019, vol. 59, pp. 749–74.10.1007/s11340-019-00509-z ↗
95. R.E. Lim, D.C. Pagan, J.V. Bernier, P.A. Shade, and A.D. Rollett: Int. J. Fatigue, 2022, vol. 156, 106614.10.1016/j.ijfatigue.2021.106614 ↗
96. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2010, vol. 58(4), pp. 1152–11.10.1016/j.actamat.2009.10.058 ↗
97. P.A. Shade, W.D. Musinski, M. Obstalecki, D.C. Pagan, A.J. Beaudoin, J.V. Bernier, and T.J. Turner: Curr. Opin. Solid State Mater. Sci., 2019, vol. 23(5), 100763.10.1016/j.cossms.2019.07.002 ↗
98. V. Hasija, S. Ghosh, M.J. Mills, and D.S. Joseph: Acta Mater., 2003, vol. 51(15), pp. 4533–49.10.1016/S1359-6454(03)00289-1 ↗
99. F. Dunne, D. Rugg, and A. Walker: Int. J. Plast, 2007, vol. 23(6), pp. 1061–83.10.1016/j.ijplas.2006.10.013 ↗
100. F. Dunne, A. Walker, and D. Rugg: Proc. R. Soc. A, 2007, vol. 463(2082), pp. 1467–89.10.1098/rspa.2007.1833 ↗