journal article·2023-11

Gravity-Induced Distortion During Liquid-Phase Sintering

Randall M. German, Elisa Torresani, Eugene A. Olevsky

Publisher page

Abstract

Sintering is used in the production of complex-shaped engineering components from compacted powders. For most applications, a predictable sintered size is a key requirement. While the formation of a liquid phase can accelerate sintering, it also can contribute to nonuniform dimensional change resulting in component distortion. Several factors, including gravity, play a role with respect to distortion. These factors are examined using tungsten heavy alloys sintered in two gravitational environments where liquid content, pore saturation with liquid, and loss of capillarity result in distortion. A significant situation arises when the component loses structural rigidity, as occurs with a low dihedral angle and high liquid content. In microgravity sintering, where buoyancy forces are absent, pores coalesce to cause swelling, leading to incomplete densification, and in some cases extensive distortion. Sintering on Earth increases solid grain contact, resulting in greater densification and less distortion. Microgravity liquid-phase-sintering behavior is substantially different from that exhibited by Earth-based sintering trials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. R.M. German: Sintering: From Empirical Observations to Scientific Principles, Elsevier, Oxford, 2014.
2. R. Bollina and R.M. German: Int. J. Refract. Met. Hard Mater., 2004, vol. 22, pp. 117–27.10.1016/j.ijrmhm.2004.01.006 ↗
3. R. Ganesan, A. Griffo, and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 659–64.10.1007/s11661-998-0146-6 ↗
4. C. Binet, K.L. Lencoski, D.F. Heaney, and R.M. German: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3833–41.
5. S. J. Park, S. H. Chung, J. L. Johnson, and R. M. German: Advances in Powder Metallurgy and Particulate Materials -2006, Metal Powder Industries Federation, Princeton, NJ, Part 5, 2006, pp.14–24.
6. J.A. Alvarado-Contreras, E.A. Olevsky, A.L. Maximenko, and R.M. German: J. Mater. Sci., 2014, vol. 49, pp. 1130–37.10.1007/s10853-013-7791-x ↗
7. J.A. Alvarado-Contreras, E.A. Olevsky, A.L. Maximenko, and R.M. German: Acta Mater., 2014, vol. 65, pp. 176–84.10.1016/j.actamat.2013.10.059 ↗
8. S.C. Yang and R.M. German: Metall. Trans. A, 1991, vol. 22A, pp. 786–91.10.1007/BF02670302 ↗
9. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
10. J.L. Johnson, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. B, 1998, vol. 29, pp. 857–66.10.1007/s11663-998-0145-4 ↗
11. A. Tewari, A.M. Gokhale, and R.M. German: Acta Mater., 1999, vol. 47, pp. 3721–34.10.1016/S1359-6454(99)00164-0 ↗
12. F. Wakai, Y. Shinoda, and T. Akatsu: Acta Mater., 2004, vol. 52, pp. 5621–31.10.1016/j.actamat.2004.08.021 ↗
13. R.M.C.V. Reis, J. Barbosa, L. Ghussn, E.B. Ferreira, M.O. Prado, and E.D. Zanotto: J. Am. Ceram. Soc., 2018, vol. 102, pp. 845–54.10.1111/jace.15997 ↗
14. P. Lu, R.M. German, and R.G. Iacocca: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2097–2107.10.1007/s11661-001-0021-1 ↗
15. Y.X. Huang, A.M.R. Senos, and J.L. Baptista: J. Eur. Ceram. Soc., 1997, vol. 17, pp. 1239–46.10.1016/S0955-2219(96)00219-1 ↗
16. B. Khoshnevis, M. P. Boniford, K. H. Burks, E. Ethridge, D. Tucker, W. Kim, and H. Toutanji: Proceedings American Institute of Aeronautics and Astronautics Conference, Reno, NV, 2005, pp. 7397–7409.
17. M. P. Bodiford, M. R. Fiske, W. McGregor, and R. D. Pope: Proceedings American Institute of Aeronautics and Astronautics First Exploration Conference, Orlando, FL, 2005, paper AIAA-2005-2704.
18. S. Lim, V. L. Prabhu, M. Anand, J. Bowen, A. Morse, and A. Holland: Proceedings European Lunar Symposium, Toulouse, France, May 2018.
19. C. C. Allen, J. C. Graf, and D. S. Mckay: Proceedings Engineering, Construction, and Operations in Space IV, S. Lokaj and R. Galloway (eds.), American Society of Civil Engineers, Albuquerque, NM, 1994, pp. 1220–29.
20. R. M. German, P. Suri, N. Erhardt, S. H. Chung: Advances in Powder Metallurgy and Particulate Materials -2004, Metal Powder Industries Federation, Princeton, NJ, 2004, Part 5, pp. 41–50.
21. R.M. German: Tungsten Heavy Alloy Handbook, Metal Powder Industries Federation, Princeton, NJ, 2021.
22. R. M. German, E. A. Olevsky, E. Torresani, and D. L. Hernandez: Advances in Powder Metallurgy and Particulate Materials - 2019, Metal Powder Industries Federation, Princeton, NJ, 2019, pp. 326-334.
23. R. M. German, E. A. Olevsky, E. Torresani, and D. L. Hernandez: Advances in Powder Metallurgy and Particulate Materials - 2018, Metal Powder Industries Federation, Princeton, NJ, 2018, pp. 67–80.
24. J.L. Johnson, L.G. Campbell, S.J. Park, and R.M. German: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 426–37.10.1007/s11661-008-9745-5 ↗
25. R.M. German and J.L. Johnson: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2286–99.10.1007/s11661-016-3372-3 ↗
26. R.M. German and K.S. Churn: Metall. Trans. A, 1984, vol. 15A, pp. 747–54.10.1007/BF02644206 ↗
27. R.M. German: Metall. Trans. A, 1987, vol. 18A, pp. 909–14.10.1007/BF02646932 ↗
28. R.M. German: Powder Technol., 2014, vol. 253, pp. 368–76.10.1016/j.powtec.2013.12.006 ↗