journal article·2022-02Open access

Direct Observation of Austenite Reversion During Aging of 18Ni (350 Grade) Maraging Steel Through In-Situ Synchrotron X-Ray Diffraction

Ana Larissa Melo Feitosa, Julián Escobar, Giovani Gonçalves Ribamar, Julian Arnaldo Avila, Angelo Fernando Padilha

Abstract

Austenite reversion in Fe–Ni alloys plays a significant role in determining their mechanical properties. Increasing the austenite content in these alloys improves their toughness but reduces their mechanical strength. In this work, austenite-reversion heat treatments between 600 C and 700 C were studied in-situ using synchrotron X-ray diffraction and scanning electron microscopy (SEM) in an 18Ni (350) maraging steel. Aging heat treatments were simulated in three steps: slow heating (0.666 C s1 ), soaking for 1 hour at temperatures between 600 C and 700 C, and cooling with forced Ar. After the treatments, the samples were prepared for SEM and microhardness analyses. The reverted austenite fraction increases with the aging temperature, and this phase proved to be partially unstable after aging at a temperature above 675 C, and it is transforming partially to martensite after cooling. In addition to the increase in the reverted austenite fraction, the coalescence and dissolution of precipitates occurred simultaneously and decreased the hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. M. Schmidt and K. Rohrbach: in Heat Treating of Irons and Steels, vol. 4, ASM International, 2014, pp. 468–80.10.31399/asm.hb.v04d.a0005948 ↗
2. S. Bodziak, K.S. Al-Rubaie, L.D. Valentina, F.H. Lafratta, E.C. Santos, A.M. Zanatta, and Y. Chen: Mater. Charact., 2019, vol. 151, pp. 73–83.10.1016/j.matchar.2019.02.033 ↗
3. K. Rohrbach, M. Schmidt, and C.T. Corporation: in Properties and Selection: Irons, Steels, and High-Performance Alloys, vol. 1, ASM International, 1990, pp. 793–800.10.31399/asm.hb.v01.a0001043 ↗
4. D.P.M. da Fonseca, A.L.M. Feitosa, L.G. de Carvalho, R.L. Plaut, and A.F. Padilha: Mater. Res., 2021, vol. 24, pp. 1–11.
5. U.K. Viswanathan, G.K. Dey, and M.K. Asundi: Metall. Trans. A., 1993, vol. 24, pp. 2429–42.10.1007/BF02646522 ↗
6. S.D. Antolovich, T.R. Risbeck, A. Saxena, and Y. Kawabe: Eng. Fract. Mech., 1980, vol. 13, pp. 717–39.10.1016/0013-7944(80)90004-1 ↗
7. A.G. dos Reis, D.A.P. Reis, A.J. Abdalla, and J. Otubo: Mater. Charact., 2015, vol. 107, pp. 350–7.10.1016/j.matchar.2015.08.002 ↗
8. W. Sha, H. Leitner, Z. Guo, and W. Xu: in Phase Transformations in Steels, Elsevier, 2012, pp. 332–62.10.1533/9780857096111.2.332 ↗
9. L. Morsdorf, O. Jeannin, D. Barbier, M. Mitsuhara, D. Raabe, and C.C. Tasan: Acta Mater., 2016, vol. 121, pp. 202–14.10.1016/j.actamat.2016.09.006 ↗
10. J. Tian, W. Wang, H. Li, M.B. Shahzad, Y. Shan, Z. Jiang, and K. Yang: Mater. Charact., 2019, vol. 155, p. 109827.10.1016/j.matchar.2019.109827 ↗
11. P. Shewmon: Diffusion in Solids, 2nd ed. Springer International Publishing, Nova York, 2016.10.1007/978-3-319-48206-4 ↗
12. A. Kwiatkowski da Silva, G. Leyson, M. Kuzmina, D. Ponge, M. Herbig, S. Sandlöbes, B. Gault, J. Neugebauer, and D. Raabe: Acta Mater., 2017, vol. 124, pp. 305–15.10.1016/j.actamat.2016.11.013 ↗
13. G.C.S. Nunes, P.W.C. Sarvezuk, T.J.B. Alves, V. Biondo, F.F. Ivashita, and A. Paesano: J. Magn. Magn. Mater., 2017, vol. 421, pp. 457–61.10.1016/j.jmmm.2016.08.052 ↗
14. X. Li and Z. Yin: Mater. Lett., 1995, vol. 23, pp. 269–72.10.1016/0167-577X(95)00053-4 ↗
15. Y. Lian, J. Huang, J. Zhang, C. Zhao, W. Gao, Z. Zhang, and M. Ma: Mater. Sci. Eng. A., 2018, vol. 712, pp. 663–70.10.1016/j.msea.2017.12.041 ↗
16. V. Gray, D. Galvin, L. Sun, E.P. Gilbert, T. Martin, P. Hill, M. Rawson, and K. Perkins: Mater. Charact., 2017, vol. 129, pp. 270–81.10.1016/j.matchar.2017.05.002 ↗
17. L.G. de Carvalho, M.S. Andrade, R.L. Plaut, F.M. Souza, and A.F. Padilha: Mater. Res., 2013, vol. 16, pp. 740–4.10.1590/S1516-14392013005000069 ↗
18. S.H. Khan, A.N. Khan, F. Ali, M.A. Iqbal, and H.K. Shukaib: J. Alloys Compd., 2009, vol. 474, pp. 254–6.10.1016/j.jallcom.2008.06.111 ↗
19. F.F. Conde, J.D. Escobar, J.P. Oliveira, A.L. Jardini, W.W. Bose Filho, and J.A. Avila: Addit. Manuf., 2019, vol. 29, p. 100804.
20. A. Ali, M. Ahmed, F.H. Hashmi, and A.Q. Khan: Mater. Sci. Technol., 1994, vol. 10, pp. 97–101.10.1179/mst.1994.10.2.97 ↗
21. R.C. Hall, G.N. McINNIS, and S. KLUZ: J. Iron Steel Inst., 1969, pp. 1310–13.
22. G.A. Faria, Exploring metallic materials behavior through in situ crystallographic studies by synchrotron radiation. (Universidade Estadual de Campinas, 2014), http://www.repositorio.unicamp.br/handle/REPOSIP/265849. Accessed 10 Dec 2020.
23. A. Bojack, L. Zhao, P.F. Morris, and J. Sietsma: Mater. Charact., 2012, vol. 71, pp. 77–86.10.1016/j.matchar.2012.06.004 ↗
24. M. Panalytical: HighScore Plus, https://www.malvernpanalytical.com/en/products/category/software/x-ray-diffraction-software/highscore-with-plus-option?creative=338893424388&keyword=highscoreplus&matchtype=e&network=g&device=c&gclid=Cj0KCQiAgebwBRDnARIsAE3eZjQz0jPtYViyIh8t0IbXNpOwjkSRt. Accessed 11 January 2020.
25. M. Król, P. Snopiński, and A. Czech: J. Therm. Anal. Calorim., 2020, vol. 142, pp. 1011–8.10.1007/s10973-020-09316-4 ↗
26. Z. Wang, A.D. Stoica, D. Ma, and A.M. Beese: Mater. Sci. Eng. A., 2018, vol. 714, pp. 75–83.10.1016/j.msea.2017.12.058 ↗
27. P. Fu, R. Chu, Z. Xu, G. Ding, and C. Jiang: Appl. Surf. Sci., 2018, vol. 431, pp. 165–9.10.1016/j.apsusc.2017.09.136 ↗
28. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed. Addison-Wesley publishing company INC., Philippines, 1978.
29. M. Niu, G. Zhou, W. Wang, M.B. Shahzad, Y. Shan, and K. Yang: Acta Mater., 2019, vol. 179, pp. 296–307.10.1016/j.actamat.2019.08.042 ↗
30. O. Moshka, M. Pinkas, E. Brosh, V. Ezersky, and L. Meshi: Mater. Sci. Eng. A., 2015, vol. 638, pp. 232–9.10.1016/j.msea.2015.04.067 ↗
31. F. Niessen, M. Villa, J. Hald, and M.A.J. Somers: Mater. Des., 2017, vol. 116, pp. 8–15.10.1016/j.matdes.2016.11.076 ↗
32. J.D. Escobar, J.D. Poplawsky, G.A. Faria, J. Rodriguez, J.P. Oliveira, C.A.F. Salvador, P.R. Mei, S.S. Babu, and A.J. Ramirez: Mater. Des., 2018, vol. 140, pp. 95–105.10.1016/j.matdes.2017.11.055 ↗
33. J.D. Escobar, G.A. Faria, E.L. Maia, J.P. Oliveira, T. Boll, S. Seils, P.R. Mei, and A.J. Ramirez: Acta Mater., 2019, vol. 174, pp. 246–59.10.1016/j.actamat.2019.05.026 ↗
34. T. Ungár: Scr. Mater., 2004, vol. 51, pp. 777–81.10.1016/j.scriptamat.2004.05.007 ↗
35. E. Jägle, Z. Sheng, P. Kürnsteiner, S. Ocylok, A. Weisheit, and D. Raabe: Materials., 2016, vol. 10, p. 8.10.3390/ma10010008 ↗
36. M. Shmulevitsh, L. Meshi, M. Pinkas, and R.Z. Shneck: J. Mater. Sci., 2015, vol. 50, pp. 4970–9.10.1007/s10853-015-9044-7 ↗
37. V.K. Vasudevan, S.J. Kim, and C.M. Wayman: Metall. Trans. A., 1990, vol. 21, pp. 2655–68.10.1007/BF02646061 ↗
38. D.T. Peters and C.R. Cupp: Trans. Metall. Soc. AIME., 1966, vol. 236, pp. 1420–9.
39. B. Rohit and N.R. Muktinutalapati: Mater. Sci. Technol., 2018, vol. 34, pp. 253–60.10.1080/02670836.2017.1407544 ↗
40. E. Hornbogen and K. Rittner: Steel Res., 1987, vol. 58, pp. 172–7.10.1002/srin.198700857 ↗
41. R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, and H. Leitner: Mater. Chem. Phys., 2010, vol. 122, pp. 138–45.10.1016/j.matchemphys.2010.02.058 ↗