Toughness Improvement in a Novel Martensitic Stainless Steel Achieved by Quenching–Tempering and Partitioning
Source abstract
Abstract
In the present work, a novel medium carbon martensitic stainless steel (MCMSS) with an excellent combination of strength, ductility, and impact toughness was designed on the basis of quenching-tempering and partitioning (Q–T&P) technology. Q–T&P is an identical heat treatment with a standard quenching and tempering (Q–T) process but has the same role with quenching and partitioning (Q&P) on microstructure control, i.e., promoting carbon-rich retained austenite via inhibiting carbide precipitation. Results show that, without compromise on strength, the total elongation and room temperature impact toughness, i.e., 9.6 pct and 90 J cm−2, of the proposed alloy (23Cr13MnSi) increase by 14 and 110 pct, respectively, as compared to those of the commercial AISI 420. The significant improvement of ductility and impact toughness in the proposed alloy is mainly a result of the gradual transformation induced plasticity (TRIP) effects, which are caused by carbon-rich retained austenite with heterogeneous stability and carbide-free martensite formed in the Q–T&P process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. C. Köse and R. Kaçar: Mater. Des., 2014, vol. 64, pp. 221–6.10.1016/j.matdes.2014.07.044 ↗
2. R. Castro and R. Tricot: in The Metallurgical Evolution of Stainless Steels, F.B. Pickering, ed., ASM, Metals Park, OH, 1979, pp. 43–62.
3. E.A. Little, D.R. Harries, F.B. Pickering, and S.R. Keown: Met. Technol., 1977, vol. 4, pp. 205–17.10.1179/030716977803292060 ↗
4. A.N. Isfahany, H. Saghafian, and G. Borhani: J. Alloys Compd., 2011, vol. 509, pp. 3931–6.10.1016/j.jallcom.2010.12.174 ↗
5. S.K. Bonagani, V. Bathula, and V. Kain: Corr. Sci., 2018, vol. 134, pp. 340–54.10.1016/j.corsci.2017.12.012 ↗
6. T. Tsuchiyama, J. Tobata, T. Tao, N. Nakadaa, and S. Takaki: Mater. Sci. Eng. A., 2012, vol. 532, pp. 585–92.10.1016/j.msea.2011.10.125 ↗
7. G. Berry and R. Brook: Met. Sci., 2013, vol. 9, pp. 467–71.10.1179/030634575790444315 ↗
8. P. Lemblé, A. Pineau, J.L. Castagne, and P. Dumoulin: Met. Sci., 2013, vol. 13, pp. 496–502.10.1179/030634579790438381 ↗
9. Y. Toji, G. Miyamoto, and D.J.A.M. Raabe: Acta Mater., 2015, vol. 86, pp. 137–47.10.1016/j.actamat.2014.11.049 ↗
10. H.Y. Li, X.W. Lu, W.J. Li, and X.J. Jin: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 1284–300.10.1007/s11661-010-0184-8 ↗
11. E.J. Seo, L. Cho, and B.C.D. Cooman: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 4022–37.10.1007/s11661-014-2316-z ↗
12. J. Mola and B.C.D. Cooman: Scripta Mater., 2011, vol. 65, pp. 834–7.10.1016/j.scriptamat.2011.07.041 ↗
13. J. Tobata, K.L. Ngo-Huynh, N. Nakada, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2012, vol. 52, pp. 1377–82.10.2355/isijinternational.52.1377 ↗
14. J. Mola and B.C.D. Cooman: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 946–67.10.1007/s11661-012-1420-1 ↗
15. S.Y. Lu, K.F. Yao, Y.B. Chen, M.H. Wang, N. Chen, and X.Y. Ge: Corr. Sci., 2016, vol. 103, pp. 95–104.10.1016/j.corsci.2015.11.010 ↗
16. H.F. Li, Q.Q. Duan, P. Zhang, and Z.F. Zhang: Adv. Eng. Mater., 2019, vol. 21, p. 1801116.10.1002/adem.201801116 ↗
17. J. Speer, D.K. Matlock, B.C.D. Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
18. D.V. Edmonds, K. He, F.C. Rizzo, B.C.D. Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A., 2006, vol. 438, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
19. M.J. Santofimia, T. Nguyen-Minh, L. Zhao, R. Petrov, I. Sabirov, and J. Sietsma: Mater. Sci. Eng. A., 2010, vol. 527, pp. 6429–39.10.1016/j.msea.2010.06.083 ↗
20. Y. Toji, H. Matsuda, M. Herbig, P.P. Choi, and D. Raabe: Acta Mater., 2014, vol. 65, pp. 215–28.10.1016/j.actamat.2013.10.064 ↗
21. H.L. Yi, L. Sun, and X.C. Xiong: Mater. Sci. Technol., 2018, vol. 34, pp. 1112–7.10.1080/02670836.2018.1424383 ↗
22. R. Parthiban, S.G. Chowdhury, K.C. Harikumar, and S. Sankaran: Mater. Sci. Eng. A., 2017, vol. 705, pp. 376–84.10.1016/j.msea.2017.08.095 ↗
23. J.G. Speer, E.D. Moor, K.O. Findley, D.K. Matlock, B.C.D. Cooman, and D.V. Edmonds: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 3591–601.10.1007/s11661-011-0869-7 ↗
24. E.P. Bagliani, M.J. Santofimia, L. Zhao, J. Sietsma, and E. Anelli: Mater. Sci. Eng. A., 2013, vol. 559, pp. 486–95.10.1016/j.msea.2012.08.130 ↗
25. Z.J. Xie, Y.Q. Ren, W.H. Zhou, J.R. Yang, C.J. Shang, and R.D.K. Misra: Mater. Sci. Eng. A., 2014, vol. 603, pp. 69–75.10.1016/j.msea.2014.02.059 ↗
26. Y. Wang, K. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng. A., 2012, vol. 552, pp. 288–94.10.1016/j.msea.2012.05.042 ↗
27. U.K. Viswanathan, G.K. Dey, and V. Sethumadhavan: Mater. Sci. Eng. A., 2005, vol. 398, pp. 367–72.10.1016/j.msea.2005.03.074 ↗
28. H.L. Yi, P. Chen, Z.Y. Hou, N. Hong, H.L. Cai, Y.B. Xu, D. Wu, and G.D. Wang: Scripta Mater., 2013, vol. 68, pp. 370–4.10.1016/j.scriptamat.2012.10.018 ↗
29. Y.S. Choi, J.G. Kim, Y.S. Park, and J.Y. Park: Mater. Lett., 2007, vol. 61, pp. 244–7.10.1016/j.matlet.2006.04.041 ↗
30. A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedström, and A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265–74.10.1016/j.actamat.2012.09.046 ↗
31. B. Kim, J. Sietsma, and M.J. Santofimia: Mater. Des., 2017, vol. 127, pp. 336–45.10.1016/j.matdes.2017.04.080 ↗
32. C.Y. Kung and J.J. Rayment: Metall. Trans. A., 1982, vol. 13A, pp. 328–31.10.1007/BF02643327 ↗
33. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
34. K.I. Sugimoto, N. Usui, M. Kobayashi, and S.I. Hashimoto: ISIJ Int., 1992, vol. 32, pp. 1311–8.10.2355/isijinternational.32.1311 ↗
35. B.D. Cullity: Elements of X-ray Diffraction. 1st ed. Addison-Wesley Publishing Co., London, 1956, pp. 237–8.
36. H.S. Yang, J.H. Jang, H.K.D.H. Bhadeshia, and D.W. Suh: Calphad., 2012, vol. 36, pp. 16–22.10.1016/j.calphad.2011.10.008 ↗
37. H.S. Yang and H.K.D.H. Bhadeshia: Scripta Mater., 2009, vol. 60, pp. 493–5.10.1016/j.scriptamat.2008.11.043 ↗
38. V. Raghavan, D.P. Antia, and M.T. Metallurgy: Metall. Mater. Trans. A., 1996, vol. 27A, pp. 1127–32.10.1007/BF02649781 ↗
39. L. Liu, B.B. He, G.J. Cheng, H.W. Yen, and M.X. Huang: Scripta Mater., 2018, vol. 150, pp. 1–6.10.1016/j.scriptamat.2018.02.035 ↗
40. N. Nakada, Y. Ishibashi, T. Tsuchiyama, and S.J. Takaki: Acta Mater., 2016, vol. 110, pp. 95–102.10.1016/j.actamat.2016.03.048 ↗
41. J. Hidalgo, K.O. Findley, and M.J. Santofimia: Mater. Sci. Eng. A., 2017, vol. 690, pp. 337–47.10.1016/j.msea.2017.03.017 ↗
42. J.G. Speer, D.K. Matlock, B.C.D. Cooman, and J.G. Schroth: Scripta Mater., 2005, vol. 52, pp. 83–5.10.1016/j.scriptamat.2004.08.029 ↗
43. T. Minemura, A. Inoue, and T.J. Masumoto: Trans. ISIJ., 1981, vol. 21, pp. 649–55.10.2355/isijinternational1966.21.649 ↗
44. G.A. Thomas and J.G. Speer: Mater. Sci. Technol., 2014, vol. 30, pp. 998–1007.10.1179/1743284714Y.0000000546 ↗
45. D.P. Yang, D. Wu, and H.L. Yi: Scripta Mater., 2019, vol. 161, pp. 1–5.10.1016/j.scriptamat.2018.09.046 ↗
46. P.J. Du, P. Chen, D.K. Misra, D. Wu, and H.L. Yi: Metals., 2020, vol. 10, pp. 1343–53.10.3390/met10101343 ↗
47. H.K.D.H. Bhadeshia: Steels: Microstructure and Properties. 3rd ed. Butterworth-Heinemann, Oxford, 2006, pp. 251–2.
48. L. Yuan, D. Ponge, J. Wittig, P. Choi, J.A. Jiménez, and D. Raabe: Acta Mater., 2012, vol. 60, pp. 2790–804.10.1016/j.actamat.2012.01.045 ↗
49. B. Deng, D.P. Yang, G.D. Wang, Z.Y. Hou, and H.L. Yi: Materials., 2021, vol. 14, p. 1000.10.3390/ma14041000 ↗
50. A. Rajasekhar, G.M. Reddy, T. Mohandas, and V.S.R. Murti: Mater. Des., 2009, vol. 30, pp. 1612–24.10.1016/j.matdes.2008.07.042 ↗
51. D.K. Hong and I.S. Kim: ISIJ Int., 1994, vol. 34, pp. 198–204.10.2355/isijinternational.34.198 ↗
52. K.F. Kelton, A.L. Greer, and C.V. Thompson: J. Chem. Phys., 1983, vol. 79, pp. 6261–76.10.1063/1.445731 ↗
53. M.G. Mecozzi, J. Eiken, M.J. Santofimia, and J. Sietsma: Comput. Mater. Sci., 2016, vol. 112, pp. 245–56.10.1016/j.commatsci.2015.10.048 ↗
54. P.M. Kelly, A. Jostsons, and R.G. Blake: Acta Metall., 1990, vol. 38, pp. 1075–81.10.1016/0956-7151(90)90180-O ↗
55. M. Saeglitz and G. Krauss: Metall. Mater. Trans. A., 1997, vol. 28A, pp. 377–87.10.1007/s11661-997-0139-x ↗
56. G. Krauss: Metall. Mater. Trans. B., 2001, vol. 32B, pp. 205–21.10.1007/s11663-001-0044-4 ↗
57. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scripta Mater., 2010, vol. 63, pp. 815–8.10.1016/j.scriptamat.2010.06.023 ↗
58. J. Wang and S.V.D. Zwaag: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
59. G.B. Olson and M. Cohen: J. Less Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
60. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scripta Mater., 2013, vol. 68, pp. 321–4.10.1016/j.scriptamat.2012.11.003 ↗
61. Q. Zhou, L. Qian, J. Tan, J. Meng, and F. Zhang: Mater. Sci. Eng. A., 2013, vol. 578, pp. 370–6.10.1016/j.msea.2013.04.096 ↗
62. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425–33.10.1016/j.actamat.2014.05.055 ↗