Impact of Surface Topography, Chemistry and Properties on the Adhesion of Sodium Alginate Coatings Electrophoretically Deposited on Titanium Biomaterials
Source abstract
Abstract
Abstract In this paper, we report on the electrophoretic deposition and characterisation of pure sodium alginate coatings on titanium biomaterials, the commercially pure titanium CP-Ti1 and Ti–13Nb–13Zr titanium alloy. Various solutions differing in the distilled water to ethanol volume ratio and sodium alginate concentration were used for coating deposition. Uniform, dense and continuous coatings with a thickness up to 1 µm were deposited. The effect of surface topography and morphology, wettability and surface free energy as well as surface chemistry on the coating adhesion to the titanium biomaterials were investigated. The coatings exhibited very good adhesion to the polished and then chemically treated alloy. The adhesion mechanisms were identified. The chemical bonding and interfacial adhesion mechanisms are plausible. The coatings exhibited low surface development, dependent on the applied substrate roughness. Sodium alginate coatings on both substrates showed moderate hydrophilicity and relatively high surface free energy, on average 30 pct higher in comparison with that of the substrate materials. The obtained results will be useful for the further development of composite sodium alginate coatings for enhancing the biological performance of titanium biomaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Bone Tissue Engineering Materials · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. [1] H. Attar, S. Ehtemam-Haghighi, N. Soro, D. Kent, M.S. Dargusch: J. Alloys Compd., 2020, vol. 827, 154263.10.1016/j.jallcom.2020.154263 ↗
2. [2] L.C. Zhang, L.Y. Chen: Adv. Eng. Mater., 2019, vol. 21, 1801215.10.1002/adem.201801215 ↗
3. [3] A.M. Khorasani, M. Goldberg, E.H. Doeven, G. Littlefair: J. Biomater. Tiss. Eng., 2015, vol. 5, pp. 593-619.10.1166/jbt.2015.1361 ↗
4. X. Zhang, G. Song, H. Qiao, J. Lan, B. Wang, H. Yang, L. Ma, S. Wang, Z. Wang, H. Lin, S. Han, S. Kang, X. Chang, Y. Huang (2020) Colloids Surf. A Physicochem. Eng. vol. 603, 12522310.1016/j.colsurfa.2020.125223 ↗
5. [5] Q. Bi, X. Song, Y. Chen, Y. Zheng, P. Yin, T. Lei: Colloids Surf. B: Biointerfaces, 2020, vol. 189, 110813.10.1016/j.colsurfb.2020.110813 ↗
6. [6] E. Parfenov, L. Parfenova, V. Mukaeva, R. Farrakhov, A. Stotskiy, A. Raab, K. Danilko, N. Rameshbabu, R. Valiev: Surf. Coat. Technol., 2020, vol. 404, 126486.10.1016/j.surfcoat.2020.126486 ↗
7. [7] H. Zhang, K. Liu, M. Lu, L. Liu, Y. Yan, Z. Chu, Y. Ge, T. Wang, J. Qiu, S. Bu, C. Tang: Mat. Sci. Eng. C, 2021, vol. 118, 111402.10.1016/j.msec.2020.111402 ↗
8. [8] P. Bansal, G. Singh, H. S. Sidhu: Mater. Chem. Phys., 2021, vol. 257, 123738.10.1016/j.matchemphys.2020.123738 ↗
9. J. Venkatesan, I. Bhatnagar, P. Manivasagan, K.H Kang, S.K Kim (2015) Int. J. Biol. Macromol., vol. 72, pp. 269-281.10.1016/j.ijbiomac.2014.07.008 ↗
10. H.E. Salama, M. S. AbdelAziz, M. Alsehli (2019) Int. J. Biol. Macromol., vol. 139, pp. 614- 620.10.1016/j.ijbiomac.2019.08.008 ↗
11. [11] P. Li, Q. Zhou, Y. Chu, W. Lan, J. Mei, J. Xie: Int. J. Biol. Macromol., 2020, vol. 160, pp. 418-428.10.1016/j.ijbiomac.2020.05.092 ↗
12. [12] G. Gaggero, M. Delucchi, G. Allegretta, S. Vicini, R. Botter: Prog. Org. Coat., 2021, vol. 151, 106016.10.1016/j.porgcoat.2020.106016 ↗
13. [13] K. Y. Lee, D. J. Mooney: Prog. Polym. Sci., 2021, vol. 37, pp. 106-126.10.1016/j.progpolymsci.2011.06.003 ↗
14. [14] S. N. Pawar, K. J. Edgar: Biomaterials, 2012, vol. 33, pp. 3279-3305.10.1016/j.biomaterials.2012.01.007 ↗
15. [15] M. Szklarska, G. Dercz, W. Simka, K. Dudek, O. Starczewska, M. Łężniak, B. Łosiewicz: Acta Phys. Pol. A, 2014, vol. 125, pp. 919-923.10.12693/APhysPolA.125.919 ↗
16. [16] W. Wu, T. Liu, H. He, X. Wu, X. Cao, J. Jin, Q. Sun, V.A.L. Roy, R.K.Y. Li: Colloids Surf. B, 2018, vol. 167, pp. 538-543.10.1016/j.colsurfb.2018.04.058 ↗
17. L. Cordero-Arias, S. Cabanas-Polo, O.M. Goudouri, S. K. Misra, J. Gilabert, E. Valsami-Jones, E. Sanchez, S. Virtanen, A.R. Boccaccini (2015) Mater. Sci. Eng. C, vol. 55, pp. 137- 144.10.1016/j.msec.2015.05.034 ↗
18. [18] D. Zhitomirsky, J.A. Roether, A.R. Boccaccini, I. Zhitomirsky: J. Mater. Process. Tech., 2009, vol. 209, pp. 1853-1860.10.1016/j.jmatprotec.2008.04.034 ↗
19. [19] J. Jung, L. Li, C. Yeh, X. Ren, Y. Sun: Mater. Sci. Eng. C, 2019, vol. 104, 109961.10.1016/j.msec.2019.109961 ↗
20. [20] T. Moskalewicz, M. Warcaba, Ł. Cieniek, M. Sitarz, M. Gajewska, A.R. Boccaccini: Appl. Surf. Sci., 2021, vol. 540, 148353.10.1016/j.apsusc.2020.148353 ↗
21. [21] A.R. Boccaccini, S. Keim, R. Ma, Y. Li, I. Zhitomirsky: J. R. Soc. Interface, 2010, vol. 7, pp. 581-613.10.1098/rsif.2010.0156.focus ↗
22. [22] R. Sikkema, K. Baker, I. Zhitomirsky: Adv. Colloid Interface Sci., 2020, vol. 284, 102272.10.1016/j.cis.2020.102272 ↗
23. [24] B. Ferrari, R. Moreno: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 1069-1078.10.1016/j.jeurceramsoc.2009.08.022 ↗
24. [25] S. Sridevi, S. Sutha, L. Kavitha, D. Gopi: Mater. Chem. Phys., 2020, vol. 254, 123455.10.1016/j.matchemphys.2020.123455 ↗
25. [26] L. Cordero-Arias, A.R. Boccaccini, S. Virtanen: Surf. Coat. Technol., 2015, vol. 265, pp. 212-217.10.1016/j.surfcoat.2015.01.007 ↗
26. [27] Z. Chen, K. Zhou, X. Lu, Y. Ch. Lam: Acta Mech., 2014, vol. 225, pp. 431-452.10.1007/s00707-013-0979-y ↗
27. [28] D. Hegemann: Comprehensive Materials Processing, 1st ed., Elsevier, USA, 2014, pp. 201-28.10.1016/B978-0-08-096532-1.00426-X ↗
28. [29] I.J. Zvonkina, M. Hilt: Chapter 5 - Strategies for developing multi-functional, self-healing coatings for corrosion prevention and other functions, in: Handbook of Smart Coatings for Materials Protection, A. Salam and H. Makhlouf (eds), 1st ed., Woodhead Publishing, United Kingdom, 2014, pp. 105-20.10.1533/9780857096883.1.105 ↗
29. [30] M. Papini, J.K. Spelt: The Mechanics of Coatings, in: The Mechanics of Adhesion, D.A. Dillard, A.V. Pocius (eds), 1st ed., Elsevier Science B.V., The Netherlands, 2002, pp. 303-50.
30. [31] F. Maciąg, T. Moskalewicz, K. Kowalski, A. Łukaszczyk, Z. Hadzhieva, A.R. Boccaccini: Materials, 2021, vol. 14, 312.10.3390/ma14020312 ↗
31. T. Bharathidasan, S. VijayKumar, M.S. Bobji, R.P.S. Chakradhar, B. J. Basu: Appl. Surf. Sci., 2014, vol. 314, pp. 241-250.10.1016/j.apsusc.2014.06.101 ↗
32. [33] T. Moskalewicz, A. Babkiewicz, B. Dubiel, M. Kot, A. Radziszewska, A. Łukaszczyk: Arch. Metall. Mater., 2016, vol. 61, pp. 2177-2182.10.1515/amm-2016-0347 ↗
33. [23] D. Jugowiec, A. Łukaszczyk, Ł. Cieniek, M. Kot, K. Reczyńska, K. Cholewa-Kowalska, E. Pamuła, T. Moskalewicz: Surf. Coat. Technol., 2017, vol. 319, pp. 33-46.10.1016/j.surfcoat.2017.03.067 ↗
34. [34] A. Sak, T. Moskalewicz, S. Zimowski, Ł. Cieniek, B. Dubiel, A. Radziszewska, M. Kot, A. Łukaszczyk: Mater. Sci. Eng. C, 2016, vol. 63, pp. 52- 61.10.1016/j.msec.2016.02.043 ↗
35. E. Verné, C. FernándezVallés, C. VitaleBrovarone, S. Soprano, C. Moisescu: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2699-2705.10.1016/j.jeurceramsoc.2003.09.004 ↗
36. [36] M. A. Selimin, N. H. M. Idrus, H. Z. I. Abdullah: Adv. Mat. Res., 2015, vol. 1087, pp. 81-85.
37. [37] H.B. Wen, Q. Liu, J.R. Wijn, K. Groot, E.Z. Cui: J. Mater. Sci. Mater. Med., 1998, vol. 9, pp. 121-128.10.1023/A:1008859417664 ↗
38. R.B. Casagrande, S.R. Kunst, L.V.R. Beltrami, C. Aguzolli, R.N. Brandaline, C.F. Malfatti: J. Coat. Technol. Res., 2018, vol. 15, pp. 1089-1106.10.1007/s11998-017-0035-2 ↗
39. [39] L. Cordero-Arias, S. Cabanas-Polo, J. Gilabert, O.M. Goudouri, E. Sanchez, S. Virtanen, A.R. Boccaccini: Adv. Appl. Ceram., 2014, vol. 113, pp. 42-49.10.1179/1743676113Y.0000000096 ↗
40. [40] Q. Chen, L. Cordero-Arias, J.A. Roether, S. Cabanas-Polo, S. Virtanen, A.R. Boccaccini: Surf. Coat. Technol., 2013, vol. 233, pp. 49-56.10.1016/j.surfcoat.2013.01.042 ↗
41. [41] M. Ammam: RSC Adv., 2012, vol. 2, pp. 7633-7646.10.1039/c2ra01342h ↗
42. [42] D. Jugowiec, A. Łukaszczyk, Ł. Cieniek, K. Kowalski, Ł. Rumian, K. Pietryga, M. Kot, E. Pamuła, T. Moskalewicz: Surf. Coat. Technol., 2017, vol. 324, pp. 64-79.10.1016/j.surfcoat.2017.05.056 ↗
43. [43] S. Vallar, D. Houivet, J. El Fallah, D. Kervadec, J.M. Haussonne: J. Eur. Ceram. Soc., 1999, vol. 19, pp. 1017-1021.10.1016/S0955-2219(98)00365-3 ↗
44. C. Ochoa-Putman, U Vaidya (2011) Composites Part A, vol. 42, pp. 906-915.10.1016/j.compositesa.2011.03.019 ↗
45. [45] Y. Arima, H. Iwata: Biomaterials, 2007, vol. 28, pp. 3074-3082.10.1016/j.biomaterials.2007.03.013 ↗
46. [46] A. Kowalski, Z. Czech, Ł. Byczyński: J. Coat. Technol. Res., 2013, vol. 10, pp. 879-885.10.1007/s11998-013-9522-2 ↗
47. [47] T.R. Hull, J.S. Colligon, A.E. Hill: Vacuum, 1987, vol. 37, pp. 327-330.10.1016/0042-207X(87)90018-2 ↗
48. [48] J. Takadoum, H.H. Bennani: Surf. Coat. Technol., 1997, vol. 96, pp. 272-282.10.1016/S0257-8972(97)00182-5 ↗
49. [49] H. Wan, D. Song, X. Li, D. Zhang, J. Gao, C. Du: Materials, 2017, vol. 10, 397.10.3390/ma10040397 ↗
50. M. Golabadi, M. Aliofkhazraei, M. Toorani, A. SabourRouhaghdam: J. Ind. Eng. Chem., 2017, vol. 47, pp. 154-168.10.1016/j.jiec.2016.11.027 ↗
51. [51] J.S. Yang, Y.J. Xie, W. He: Carbohydr Polym., 2011, vol. 84, pp. 33-39.10.1016/j.carbpol.2010.11.048 ↗
52. [53] M. Gawęda, E. Długoń, P. Jeleń, R. Jadach, A. Wajda, M. Nocuń, M. Szymańska, M. Sitarz: J. Mol. Struct., 2018, vol. 1166, pp. 321-325.10.1016/j.molstruc.2018.04.026 ↗
53. [52] D. Luo, I. Zhitomirsky: J. Electrochem. Soc., 2015, vol. 162, pp. 3057-3062.10.1149/2.0191511jes ↗