Gradient of Residual Stress and Lattice Parameter in Mechanically Polished Tungsten Measured Using Classical X-rays and Synchrotron Radiation
Source abstract
Abstract
Abstract In this work, the stress gradient in mechanically polished tungsten sample was studied using X-ray diffraction methods. To determine in-depth stress evolution in the very shallow subsurface region (up to 10 μm), special methods based on reflection geometry were applied. The subsurface stresses (depth up to 1 μm) were measured using the multiple-reflection grazing incidence X-ray diffraction method with classical characteristic X-rays, while the deeper volumes (depth up to 10 μm) were investigated using energy-dispersive diffraction with white high energy synchrotron beam. Both complementary methods allowed for determining in-depth stress profile and the evolution of stress-free lattice parameter. It was confirmed that the crystals of tungsten are elastically isotropic, which simplifies the stress analysis and makes tungsten a suitable material for testing stress measurement methods. Furthermore, it was found that an important compressive stress of about − 1000 MPa was generated on the surface of the mechanically polished sample, and this stress decreases to zero value at the depth of about 9 μm. On the other hand, the strain-free lattice parameter does not change significantly in the examined subsurface region.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Coefficients of Linear Thermal Expansion. https://www.engineeringtoolbox.com/linear-expansion-coefficients-d_95.html. Accessed 25 July 2019.
2. Densities of Metals and Elements Table | Engineers Edge |. www.engineersedge.com, https://www.engineersedge.com/materials/densities_of_metals_and_elements_table_13976.htm. Accessed 25 July 2019.
3. The thermal conductivity of pure metals. https://www.electronics-cooling.com/1999/01/the-thermal-conductivity-of-pure-metals/. Accessed 25 July 2019.
4. Tungsten Price 2019 [Updated Daily]. https://metalary.com/tungsten-price/. Accessed 25 July 2019.
5. J.W. Coenen, Y. Mao, J. Almanstötter, A. Calvo, S. Sistla, H. Gietl, B. Jasper, J. Riesch, M. Rieth, G. Pintsuk, F. Klein, A. Litnovsky, A.V. Mueller, T. Wegener, J.-H. You, Ch. Broeckmann, C. Garcia-Rosales, R. Neu, and C.H. Linsmeier: Fusion Engineering and Design, 2017, vol. 124, pp. 964–8.10.1016/j.fusengdes.2016.12.006 ↗
6. 6 G. Marinelli, F. Martina, S. Ganguly, S. Williams, H. Lewtas, D. Hancock, S. Mehraban, and N. Lavery: J. Nucl. Mater. 522:45–53, 2019.10.1016/j.jnucmat.2019.04.049 ↗
7. 7 M. Rieth, S.L. Dudarev, S.M. Gonzalez de Vicente, J. Aktaa, T. Ahlgren, S. Antusch, D.E.J. Armstrong, M. Balden, N. Baluc, M.-F. Barthe, W.W. Basuki, M. Battabyal, C.S. Becquart, D. Blagoeva, H. Boldyryeva, J. Brinkmann, M. Celino, L. Ciupinski, J.B. Correia, A. De Backer, C. Domain, E. Gaganidze, C. García-Rosales, J. Gibson, M.R. Gilbert, S. Giusepponi, B. Gludovatz, H. Greuner, K. Heinola, T. Höschen, A. Hoffmann, N. Holstein, F. Koch, W. Krauss, H. Li, S. Lindig, J. Linke, Ch. Linsmeier, P. López-Ruiz, H. Maier, J. Matejicek, T.P. Mishra, M. Muhammed, A. Muñoz, M. Muzyk, K. Nordlund, D. Nguyen-Manh, J. Opschoor, N. Ordás, T. Palacios, G. Pintsuk, R. Pippan, J. Reiser, J. Riesch, S.G. Roberts, L. Romaner, M. Rosiński, M. Sanchez, W. Schulmeyer, H. Traxler, A. Ureña, J.G. van der Laan, L. Veleva, S. Wahlberg, M. Walter, T. Weber, T. Weitkamp, S. Wurster, M.A. Yar, J.H. You, and A. Zivelonghi: Journal of Nuclear Materials, 2013, vol. 432, pp. 482–500.10.1016/j.jnucmat.2012.08.018 ↗
8. 8 Z. Zhang, W. Han, and A. Kimura: J. Plasma Fusion Res. SERIES, 2015, vol. 11, pp. 94–8.
9. T. Palacios García: Phd, E.T.S.I. Caminos, Canales y Puertos (UPM), 2015.
10. 10 A. Dubinko: Plastic Deformation of Tungsten Under Fusion-Plasma Exposure Conditions. Universidad Complutense De Madrid, Madrid, 2019.
11. 11 K. Deprez, S. Vandenberghe, K.V. Audenhaege, J.V. Vaerenbergh, and R.V. Holen: Medical Physics, 2013, vol. 40, p. 012501.10.1118/1.4769122 ↗
12. Tungsten Applications - Electrical Applications. https://www.azom.com/article.aspx?ArticleID=1262. Accessed 25 July 2019.
13. 13 A. Wronski and A. Foukdeux: Journal of the Less Common Metals, 1965, vol. 8, pp. 149–58.10.1016/0022-5088(65)90042-1 ↗
14. J.R. Stephens: Review of Deformation Behaviour of Tungsten at Temperatures Less than 02 Absolute Melting Temperature, TM X-2482, NASA, Washington, DC, 1972.
15. D.H. Lassila and G.T.I. Gray: Journal de Physique IV, 1994, vol. 4, pp. C8349–C8354.
16. A. Giannattasio, Z. Yao, E. Tarleton, and S.G. Roberts: Philosophical Magazine, 2010, vol. 90, pp. 3947–59.10.1080/14786435.2010.502145 ↗
17. Y. Yuan, J. Du, M. Wirtz, G.-N. Luo, G.-H. Lu, and W. Liu: Nucl. Fusion, 2016, vol. 56, p. 036021.10.1088/0029-5515/56/3/036021 ↗
18. Chopra et al. United States, US6273786B1, 2001. https://patentimages.storage.googleapis.com/3f/5e/72/185f1f6b409526/US6273786.pdf.
19. D. Iglesias, X. Lin, J. Loy, and F. Perez: GE Tube Polishing System, Worcester Polytechnic Institute, 2013.
20. I. Uytdenhouwen, W. Vandermeulen, Y. Zayachuk, and R. Kemps: JMSE 1:12 (2016).10.17265/2161-6221/2016.7-8.001 ↗
21. S.J. Skrzypek, A. Baczmański, W. Ratuszek, and E. Kusior: J Appl Cryst, 2001, vol. 34, pp. 427–35.10.1107/S0021889801005404 ↗
22. M. Marciszko, A. Baczmański, M. Wróbel, W. Seiler, C. Braham, J. Donges, M. Śniechowski, and K. Wierzbanowski: Thin Solid Films, 2013, vol. 530, pp. 81–4.10.1016/j.tsf.2012.05.042 ↗
23. M. Marciszko, A. Baczmański, K. Wierzbanowski, J.-P. Chopart, A. Lodini, N. Zazi, C. Braham, and W. Seiler: Mater. Sci. Forum, 2014, vol. 783–786, pp. 2091–6.10.4028/www.scientific.net/MSF.783-786.2091 ↗
24. M. Marciszko, A. Baczmański, M. Klaus, C. Genzel, A. Oponowicz, S. Wroński, M. Wróbel, C. Braham, H. Sidhom, and R. Wawszczak: J Appl Cryst, 2018, vol. 51, pp. 732–45.10.1107/S1600576718004193 ↗
25. L. De Buyser, P. Van Houtte, and E. Aernoudt: Textures and Microstructures, 1991, vol. 14–18, pp. 73–8.10.1155/TSM.14-18.73 ↗
26. K. Van Acker, L. De Buyser, J.P. Celis, and P. Van Houtte: J Appl Cryst, 1994, vol. 27, pp. 56–66.10.1107/S002188989300651X ↗
27. 27 Ch. Genzel, I.A. Denks, J. Gibmeier, M. Klaus, and G. Wagener: Nucl Instrum Methods Phys Res Sect A, 2007, vol. 578, pp. 23–33.10.1016/j.nima.2007.05.209 ↗
28. 28 M. Meixner, M. Klaus, and C. Genzel: J Appl Cryst, 2013, vol. 46, pp. 610–8.10.1107/S0021889813008340 ↗
29. 29 M. Meixner, M. Klaus, and C. Genzel: J Appl Cryst, 2013, vol. 46, pp. 619–27.10.1107/S0021889813008364 ↗
30. M. Klaus and F. Garcia-Moreno: Journal of Large-Scale Research Facilities JLSRF, 2016, vol. 2, p. 40.10.17815/jlsrf-2-63 ↗
31. 31 C. Genzel, I.A. Denks, R. Coelho, D. Thomas, R. Mainz, D. Apel, and M. Klaus: The Journal of Strain Analysis for Engineering Design, 2011, vol. 46, pp. 615–25.10.1177/0309324711403824 ↗
32. 32 C. Genzel: Physica Status Solidi (a), 1996, vol. 156, pp. 353–63.10.1002/pssa.2211560213 ↗
33. 33 I.C. Noyan and J.B. Cohen: Residual Stress: Measurement by Diffraction and Interpretation, Springer, Berlin, 1987.10.1007/978-1-4613-9570-6 ↗
34. 34 M. Marciszko, A. Baczmański, C. Braham, M. Wróbel, W. Seiler, S. Wroński, and K. Berent: Journal of Applied Crystallography, 2016, vol. 49, pp. 85–102.10.1107/S1600576715021810 ↗
35. 35 M. Marciszko, A. Baczmański, K. Wierzbanowski, M. Wróbel, C. Braham, J.-P. Chopart, A. Lodini, J. Bonarski, L. Tarkowski, and N. Zazi: Applied Surface Science, 2012, vol. 266, pp. 256–67.10.1016/j.apsusc.2012.12.005 ↗
36. 36 U. Welzel, J. Ligot, P. Lamparter, A.C. Vermeulen, and E.J. Mittemeijer: J Appl Cryst, 2005, vol. 38, pp. 1–29.10.1107/S0021889804029516 ↗
37. 37 V. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, 1997.
38. 38 M. Marciszko, A. Baczmański, M. Wróbel, W. Seiler, C. Braham, S. Wroński, and R. Wawszczak: J. Appl. Crystallogr., 2015, vol. 48, pp. 492–509.10.1107/S1600576715002666 ↗
39. 39 P. Thompson, D.E. Cox, and J.B. Hastings: J Appl Cryst, 1987, vol. 20, pp. 79–83.10.1107/S0021889887087090 ↗
40. 40 M. Marciszko-Wiąckowska, A. Oponowicz, A. Baczmański, M. Wróbel, C. Braham, and R. Wawszczak: J Appl Cryst, 2019, vol. 52, pp. 1409–21.10.1107/S1600576719013876 ↗
41. 41 D. Apel, M. Meixner, A. Liehr, M. Klaus, S. Degener, G. Wagener, C. Franz, W. Zinn, C. Genzel, and B. Scholtes: Nucl Instrum Methods Phys Res A, 2018, vol. 877, pp. 24–33.10.1016/j.nima.2017.09.005 ↗
42. 42 M. Klaus, W. Reimers, and C. Genzel: Powder Diffraction, 2009, vol. 24, pp. S82–6.10.1154/1.3134362 ↗
43. 43 C.H. Genzel, C. Stock, and W. Reimers: Mater. Sci. Eng. A, 2004, vol. 372, pp. 28–43.10.1016/j.msea.2003.09.073 ↗
44. 44 M. Klaus, Ch. Genzel, and H. Holzschuh: Thin Solid Films, 2008, vol. 517, pp. 1172–6.10.1016/j.tsf.2008.05.018 ↗
45. A.G. (A. Г.) Rahstadt (Рахштадта) and V.A. (B. A.) Brostrem (Брострема): Spravochnik Myetallista (Ϲправочник Металлиста), vol. 2, Mashinostroenie (Машиностроение), Moskva (Москва), 1976.
46. 46 L.G. Schulz: Journal of Applied Physics, 1949, vol. 20, pp. 1030–3.10.1063/1.1698268 ↗
47. LaboSoft—the texture analysis software for Windows. Pole figures processing, texture analysis, ODF calculation with ADC method. http://www.labosoft.com.pl/index.html. Accessed 25 July 2019.
48. R.W. Hertzberg, R.P. Vinci, and J.L. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 5th ed., John Wiley & Sons, Inc., 1937, p. 38.
49. Help Online—Origin Help—Algorithms (Linear Regression), https://www.originlab.com/doc/Origin-Help/LR-Algorithm. Accessed 8 June 2020.
50. 50 A. Baczmanski, P. Lipinski, A. Tidu, K. Wierzbanowski, and B. Pathiraj: J APPL CRYSTALLOGR, 2008, vol. 41, pp. 854–67.10.1107/S0021889808023911 ↗
51. 51 S. Wroński, A. Baczmański, R. Dakhlaoui, C. Braham, K. Wierzbanowski, and E.C. Oliver: Acta Materialia, 2007, vol. 55, pp. 6219–33.10.1016/j.actamat.2007.07.044 ↗
52. 52 T. Erbacher, A. Wanner, T. Beck, and O. Vöhringer: Journal of Applied Crystallography, 2008, vol. 41, pp. 377–85.10.1107/S0021889807066836 ↗
53. Confidence and Prediction Bounds - MATLAB & Simulink. https://www.mathworks.com/help/curvefit/confidence-and-prediction-bounds.html?searchHighlight=simultaneous%20prediction%20bounds&s_tid=doc_srchtitle. Accessed 3 Feb 2020.
54. 54 Ch. Genzel, C. Stock, B. Wallis, and W. Reimers: Nucl Instrum Methods Phys Res A 2001, vol. 467–468, pp. 1253–6.10.1016/S0168-9002(01)00647-7 ↗