Effects of Intermetallic Microstructure on Degradation of Mg-5Nd Alloy
Source abstract
Abstract
Abstract The influence of intermetallic microstructure on the degradation of Mg-5Nd alloy with different heat treatments was investigated via immersion testing in DMEM + 10 pct FBS under cell culture conditions and subsequent microstructural characterizations. It was found that T4 heat-treated sample had the poorest corrosion resistance due to the lack of finely dispersed precipitates inside grains, continuous lamellar particles along grain boundaries and outer Ca-P layer, and to the formation of a loose corrosion product layer. In contrast, the aged samples exhibited a better corrosion resistance due to their presence and to the formation of a compact corrosion layer. Their degradation behavior largely depended on the intermetallic microstructure. Corrosion was initiated in the matrix around stable globular particles Mg41Nd5 at grain boundaries. In the sample aged at high temperature 245 °C, the coexistence of lamellar Mg41Nd5 particles and their nearby Nd-poor regions enhanced the corrosion. The corrosion first started in such regions. It was shown that those finely dispersed precipitates formed during aging had no influence on the corrosion initiation. However, they indeed affected the subsequent corrosion propagation with the immersion proceeding. They supplied barriers for corrosion propagation and hence were beneficial for improving the corrosion resistance. The continuously distributed lamellar Mg41Nd5 precipitates formed at grain boundaries during aging at 245 °C supplied an additional effective obstacle to corrosion propagation. This was especially beneficial for hindering the corrosion propagation at the later stage of corrosion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Y. Lu, Y. L. Chiu and I. P. Jones: Mater. Charact., 2016, vol. 112, pp. 113-121.10.1016/j.matchar.2015.12.008 ↗
2. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, Y. Jiang and Y. Bian: Acta Biomater., 2010, vol. 6, pp. 626-640.10.1016/j.actbio.2009.06.028 ↗
3. C. Liu, P. He, P. Wan, M. Li, K. Wang, L. Tan, Y. Zhang and K. Yang: J. Biomed. Mater. Res., Part A, 2015, vol. 103, pp. 2405-2415.10.1002/jbm.a.35374 ↗
4. E. B. Öcal, Z. Esen, A. F. Dericioğlu and K. Aydınol: Mater. Chem. Phys., 2019, 214, pp. 122350.
5. Z. Li, X. Gu, S. Lou and Y. Zheng: Biomaterials, 2008, vol. 29, pp. 1329-1344.10.1016/j.biomaterials.2007.12.021 ↗
6. J. W. Seong and W. J. Kim: Acta Biomater., 2015, vol. 11, pp. 531-542.10.1016/j.actbio.2014.09.029 ↗
7. L. Yang, Y. Huang, F. Feyerabend, R. Willumeit-Römer, K. U. Kainer and N. Hort: J. Mech. Behav. Biomed. Mater., 2012, vol. 13, pp. 36-44.10.1016/j.jmbbm.2012.04.007 ↗
8. B. Mingo, R. Arrabal, M. Mohedano, C. L. Mendis, R. del Olmo, E. Matykina, N. Hort, M. C. Merino and A. Pardo: Mater. Des., 2017, vol. 130, pp. 48-58.10.1016/j.matdes.2017.05.048 ↗
9. S. D. Wang, D. K. Xu, B. J. Wang, L. Y. Sheng, Y. X. Qiao, E. H. Han and C. Dong: Corros. Sci., 2018, vol. 142, pp. 185-200.10.1016/j.corsci.2018.07.019 ↗
10. M. Němec, A. Jäger, K. Tesař and V. Gärtnerová: Mater. Charact., 2017, vol. 134, pp. 69-75.10.1016/j.matchar.2017.10.017 ↗
11. W. R. Zhou, Y. F. Zheng, M. A. Leeflang and J. Zhou: Acta Biomater., 2013, vol. 9, pp. 8488-8498.10.1016/j.actbio.2013.01.032 ↗
12. M. C. Zhao, M. Liu, G. Song and A. Atrens: Corros. Sci., 2008, vol. 50, pp. 1939-1953.10.1016/j.corsci.2008.04.010 ↗
13. M. B. Kannan: Mater. Lett., 2010, vol. 64, pp. 739-742.10.1016/j.matlet.2010.01.022 ↗
14. O. Lunder, J. Lein, T. K. Aune and K. Nisancioglu: Corrosion, 1989, vol. 45, pp. 741-748.10.5006/1.3585029 ↗
15. Y. W. Song, E. H. Han, D. Y. Shan, C. D. Yim and B. S. You: Corros. Sci., 2012, vol. 60, pp. 238-245.10.1016/j.corsci.2012.03.030 ↗
16. R. H. Buzolin, M. Mohedano, C. L. Mendis, B. Mingo, D. Tolnai, C. Blawert, K. U. Kainer, H. Pinto and N. Hort: Mat. Sci. Eng. A, 2017, vol. 682, pp. 238-247.10.1016/j.msea.2016.11.022 ↗
17. C. Shuai, Y. Yang, S. Peng, C. Gao, P. Feng, J. Chen, Y. Liu, X. Lin, S. Yang and F. Yuan: J. Mater. Sci.: Mater. Med., 2017, vol. 28, pp. 130.
18. N. Hort, Y. D. Huang and K. U. Kainer: Adv. Eng. Mater., 2006, vol. 8, pp. 235-240.10.1002/adem.200500202 ↗
19. S. Gorsse, C. R. Hutchinson, B. Chevalier and J. F. Nie: J. Alloys Compd., 2005, vol. 392, pp. 253-262.10.1016/j.jallcom.2004.09.040 ↗
20. F. Feyerabend, J. Fischer, J. Holtz, F. Witte, R. Willumeit-Römer, H. Drucker, C. Vogt and N. Hort: Acta Biomater., 2010, vol. 6, pp. 1834-1842.10.1016/j.actbio.2009.09.024 ↗
21. F. Bär, L. Berger, L. Jauer, G. Kurtuldu, R. Schäublin, J. H. Schleifenbaum and J. F. Löffler: Acta Biomater., 2019, vol. 98, pp. 36-49.10.1016/j.actbio.2019.05.056 ↗
22. N. Anisimova, M. Kiselevskiy, N. Martynenko, B. Straumal, R. Willumeit-Römer, S. Dobatkin and Y. Estrin: J. Biomed. Mater. Res., Part B, 2019, vol. 108, pp. 167-173.10.1002/jbm.b.34375 ↗
23. B. Smola, L. Joska, V. Březina, I. Stulíková and F. Hnilica: Mat. Sci. Eng. C, 2012, vol. 32, pp. 659-664.10.1016/j.msec.2012.01.003 ↗
24. R. Walter and M. B. Kannan: Mater. Lett., 2011, vol. 65, pp. 748-750.10.1016/j.matlet.2010.11.051 ↗
25. M. A. Easton, M. A. Gibson, D. Qiu, S. M. Zhu, J. Gröbner, R. Schmid-Fetzer, J. F. Nie and M. X. Zhang: Acta Mater., 2012, vol. 60, pp. 4420-4430.10.1016/j.actamat.2012.04.039 ↗
26. L. L. Rokhlin: Magnesium alloys containing rare earth metals: structure and properties, Crc Press, Boca Raton 2003.10.1201/9781482265163 ↗
27. S. Delfino, A. Saccone and R. Ferro: Metall. Trans. A, 1990, vol. 21, pp. 2109-2114.10.1007/BF02647869 ↗
28. J. KubÁSek and D. VojtĚCh: T. Nonferr. Metal. Soc., 2013, vol. 23, pp. 1215-1225.10.1016/S1003-6326(13)62586-8 ↗
29. B. Sun, J. Tan, H. Zhang and Y. Sun: Scr. Mater., 2019, vol. 161, pp. 6-12.10.1016/j.scriptamat.2018.10.005 ↗
30. Y. M. Zhu, H. Liu, Z. Xu, Y. Wang and J. F. Nie: Acta Mater., 2015, vol. 83, pp. 239-247.10.1016/j.actamat.2014.09.037 ↗
31. Z. Xu, M. Weyland and J. F. Nie: Acta Mater., 2014, vol. 75, pp. 122-133.10.1016/j.actamat.2014.04.073 ↗
32. L. Y. Wei, G. L. Dunlop and H. Westengen: J. Mater. Sci., 1996, vol. 31, pp. 387-397.10.1007/BF01139156 ↗
33. J. W. Chang, X. W. Guo, P. H. Fu, L. M. Peng and W. J. Ding: T. Nonferr. Metal. Soc., 2007, vol. 17, pp. 1152-1157.10.1016/S1003-6326(07)60241-6 ↗
34. A. Südholz, N. Kirkland, R. Buchheit and N. Birbilis: Electrochem. Solid-State Lett., 2011, vol. 14, pp. C5-C7.10.1149/1.3523229 ↗
35. J. W. Chang, P. H. Fu, X. W. Guo, L. M. Peng and W. J. Ding: Corros. Sci., 2007, vol. 49, pp. 2612-2627.10.1016/j.corsci.2006.12.011 ↗
36. M. Cihova, E. Martinelli, P. Schmutz, A. Myrissa, R. Schäublin, A. M. Weinberg, P. J. Uggowitzer and J. F. Löffler: Acta Biomater., 2019, vol. 100, pp. 398-414.10.1016/j.actbio.2019.09.021 ↗
37. M. Cihova, P. Schmutz, R. Schäublin and J. F. Löffler: Adv. Mater., 2019, vol. 31, pp. 1903080.10.1002/adma.201903080 ↗
38. N. G. Grün, P. Holweg, S. Tangl, J. Eichler, L. Berger, J. J. J. P. van den Beucken, J. F. Löffler, T. Klestil and A. M. Weinberg: Acta Biomater., 2018, vol. 78, pp. 378-386.10.1016/j.actbio.2018.07.044 ↗
39. Y. L. Xu, L. Wang, M. Huang, F. Gensch, K. U. Kainer and N. Hort: Adv. Eng. Mater, 2018, vol. 20, pp. 1800271.10.1002/adem.201800271 ↗
40. F.R. Elsayed, N. Hort, M.A. Salgado Ordorica and K.U. Kainer: in Materials Science Forum (2011), pp. 65–68.10.4028/www.scientific.net/MSF.690.65 ↗
41. R. Wilson, C. Bettles, B.C. Muddle and J. F. Nie: in Materials Science Forum, (Trans Tech Publications Ltd., Zurich-Uetikon, Switzerland, 2003), pp. 267–72.10.4028/www.scientific.net/MSF.419-422.267 ↗
42. V. Kree, J. Bohlen, D. Letzig and K. U. Kainer: Prakt. Metallogr. Pr. M., 2004, vol. 41, pp. 233-246.10.1515/pm-2004-410505 ↗
43. N. Hort, V. Floss, S. Gavras, G. Wiese and D. Tolnai: in The Mineral, Metals & Materials Society 2019, ed. V.V. Joshi et al., (San Antonio, Texas, 2019).
44. in: Standard Test Methods for Determining Average Grain Size (ASTM International, 2013).
45. J. Fischer, M. H. Prosenc, M. Wolff, N. Hort, R. Willumeit-Römer and F. Feyerabend: Acta Biomater., 2010, vol. 6, pp. 1813-23.10.1016/j.actbio.2009.10.020 ↗
46. E. ISO: German version: DIN EN ISO, 2008, pp. 10912–93.
47. R. Hou, J. Victoria-Hernandez, P. Jiang, R. Willumeit-Römer, B. Luthringer-Feyerabend, S. Yi, D. Letzig and F. Feyerabend: Acta Biomater., 2019, vol. 97, pp. 608-622.10.1016/j.actbio.2019.07.053 ↗
48. E. P. S. Nidadavolu, F. Feyerabend, T. Ebel, R. Willumeit-Römer and M. Dahms: Materials, 2016, vol. 9, pp. 627.10.3390/ma9080627 ↗
49. J. Gonzalez, R. Q. Hou, E. P. S. Nidadavolu, R. Willumeit-Römer and F. Feyerabend: Bioact. Mater., 2018, vol. 3, pp. 174-185.10.1016/j.bioactmat.2018.01.003 ↗
50. N. A. Agha, Z. Liu, F. Feyerabend, R. Willumeit-Römer, B. Gasharova, S. Heidrich and B. Mihailova: Mat. Sci. Eng. C, 2018, vol. 91, pp. 659-668.10.1016/j.msec.2018.06.001 ↗
51. Z. Zhen, T. F. Xi and Y. F. Zheng: T. Nonferr. Metal. Soc., 2013, vol. 23, pp. 2283-2293.10.1016/S1003-6326(13)62730-2 ↗
52. R. Q. Hou, N. Scharnagl, F. Feyerabend and R. Willumeit-Römer: Corros. Sci., 2018, vol. 132, pp. 35-45.10.1016/j.corsci.2017.12.023 ↗
53. J. Zheng and J. S. Reed: J. Am. Ceram. Soc., 1989, vol. 72, pp. 810-817.10.1111/j.1151-2916.1989.tb06222.x ↗
54. P. Vostrý, B. Smola, I. Stulikova, F. Von Buch and B. Mordike: Phys. Status Solidi., 1999, vol. 175, pp. 491-500.10.1002/(SICI)1521-396X(199910)175:2<491::AID-PSSA491>3.0.CO;2-F ↗
55. P. J. Apps, H. Karimzadeh, J. F. King and G. W. Lorimer: Scr. Mater., 2003, vol. 48, pp. 1023-1028.10.1016/S1359-6462(02)00596-1 ↗
56. J.F. Nie: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3891-3939.10.1007/s11661-012-1217-2 ↗
57. C. Zhai, Q. Luo, Q. Cai, R. Guan and Q. Li: J. Alloys Compd., 2019, vol. 773, pp. 202-209.10.1016/j.jallcom.2018.09.203 ↗
58. Y. Wang, Y. Huang, X. Meng, L. Wan and J. Feng: J. Alloys Compd., 2017, vol. 696, pp. 875-883.10.1016/j.jallcom.2016.12.068 ↗
59. I. Kaur, W. Gust and Y. Mishin: Fundamentals of grain and interphase boundary diffusion, Wiley Chichester, New York, 1995.
60. A. Atrens, S. Johnston, Z. M. Shi and M. S. Dargusch: Scr. Mater., 2018, vol. 154, pp. 92-100.10.1016/j.scriptamat.2018.05.021 ↗
61. L. Yang, G. Liu, L. Ma, E. Zhang, X. Zhou and G. Thompson: Corros. Sci., 2018, vol. 139, pp. 421-429.10.1016/j.corsci.2018.04.024 ↗
62. W.E. Mercer and J.E. Hillis, Report No. 0148-7191, SAE Technical Paper1992.
63. N. Birbilis, M. A. Easton, A. D. Sudholz, S. M. Zhu and M. A. Gibson: Corros. Sci., 2009, vol. 51, pp. 683-689.10.1016/j.corsci.2008.12.012 ↗
64. S. Han, S. Mu and J. Du: Corrosion, 2019, vol. 75, pp. 1100-1109.10.5006/3176 ↗
65. K. Hantzsche, J. Bohlen, J. Wendt, K. U. Kainer, S. B. Yi and D. Letzig: Scr. Mater., 2010, vol. 63, pp. 725-730.10.1016/j.scriptamat.2009.12.033 ↗
66. L. Yang, L. Ma, Y. Huang, F. Feyerabend, C. Blawert, D. Höche, R. Willumeit-Römer, E. Zhang, K. U. Kainer and N. Hort: Mat. Sci. Eng. C, 2017, vol. 75, pp. 1351-1358.10.1016/j.msec.2017.03.010 ↗
67. N. Angrisani, J. M. Seitz, A. Meyer-Lindenberg and J. Reifenrath: New features on magnesium alloys, 2012, vol. 35, pp. 81-98.
68. F. Lu, A. Ma, J. Jiang, Y. Guo, D. Yang, D. Song and J. Chen: Corros. Sci., 2015, vol. 94, pp. 171-178.10.1016/j.corsci.2015.01.052 ↗
69. A. Atrens, M. Liu, N.I.Z. Abidin and G.L. Song: in Corrosion of Magnesium Alloys, ed. G. L. Song, Woodhead Publishing, 2011, pp. 117–65.10.1533/9780857091413.2.117 ↗
70. D. Mei, S. V. Lamaka, J. Gonzalez, F. Feyerabend, R. Willumeit-Römer and M. L. Zheludkevich: Corros. Sci., 2019, vol. 147, pp. 81-93.10.1016/j.corsci.2018.11.011 ↗
71. M. Kieke, F. Feyerabend, J. Lemaitre, P. Behrens and R. Willumeit-Römer: BioNanoMaterials, 2016, vol. 17, pp. 131-143.10.1515/bnm-2015-0020 ↗
72. J. Hofstetter, E. Martinelli, A. M. Weinberg, M. Becker, B. Mingler, P. J. Uggowitzer and J. F. Löffler: Corros. Sci., 2015, vol. 91, pp. 29-36.10.1016/j.corsci.2014.09.008 ↗
73. W. Cheng and Z. Li: Ind. Eng. Chem. Res., 2010, vol. 49, pp. 1964-1974.10.1021/ie9015073 ↗
74. P. J. Davies and B. Bubela: Chem. Geol., 1973, vol. 12, pp. 289-300.10.1016/0009-2541(73)90006-5 ↗
75. P. K. Bowen, J. Drelich and J. Goldman: Acta Biomater., 2014, vol. 10, pp. 1475-1483.10.1016/j.actbio.2013.11.021 ↗
76. Y. Xin, T. Hu and P. K. Chu: Acta Biomater., 2011, vol. 7, pp. 1452-1459.10.1016/j.actbio.2010.12.004 ↗
77. D. Tie, F. Feyerabend, N. Hort, R. Willumeit-Römer and D. Hoeche: Adv. Eng. Mater., 2010, vol. 12, pp. B699-B704.10.1002/adem.201080070 ↗
78. S. V. Lamaka, J. Gonzalez, D. Mei, F. Feyerabend, R. Willumeit-Römer and M. L. Zheludkevich: Adv. Mater. Interfaces, 2018, vol. 5, pp. 1800169.10.1002/admi.201800169 ↗
79. L. Yang, N. Hort, D. Laipple, D. Höche, Y. Huang, K. U. Kainer, R. Willumeit-Römer and F. Feyerabend: Acta Biomater., 2013, vol. 9, pp. 8475-8487.10.1016/j.actbio.2012.10.001 ↗