journal article·2020-10Open access

Evaluation of the Effect of Rare Earth Alloying Additions on the Hot Tearing Susceptibility of Aluminum Alloy 7150 During Rapid Solidification

M. J. Benoit, S. M. Zhu, T. B. Abbott, M. A. Easton

Abstract

Additive manufacturing of the high-strength 7xxx Al alloy series is limited due to the susceptibility of these alloys to hot tearing. The objective of the current study is to determine the effect of rare earth (RE) element additions on the hot tearing susceptibility of Al alloy 7150 during rapid solidification conditions characteristic of additive manufacturing processes. Cast 7150-xRE (x = 0, 3, 6 wt pct) samples were remelted using a number of laser power-scan speed combinations. Cracks were observed in melt pools for 6 out of 12 processing conditions for 7150, but in all 12 conditions for the RE-containing alloys. Electron backscatter diffraction of the melt pool revealed the melt pool boundary grain size increased with RE additions, and cracks occurred along the grain boundaries. RE-containing intermetallics were observed on the crack surfaces, and were noted to possibly impede the interdendritic flow of eutectic liquids. A smaller amount of eutectic was observed in the thermal data for the RE alloys compared to 7150. Hot tearing indicators were useful in understanding the effect of RE additions when coupled with the experimental results. It is concluded that the addition of 3 to 6 wt pct RE elements increases hot tearing in 7150.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. I. Gibson, D. Rosen and B. Stucker: Additive manufacturing technologies - 3D printing, rapid prototyping, and direct digital manufacturing, 2nd ed, Springer, New York, NY 2015.10.1007/978-1-4939-2113-3 ↗
2. D. Zhang, S. Sun, D. Qiu, M. A. Gibson, M. S. Dargusch, M. Brandt, M. Qian and M. Easton: Adv. Eng. Mater., 2018, vol. 20, pp. 1-20.
3. Q. L. Bai, Y. Li, H. X. Li, Q. Du and J. S. Zhang: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 4080-4091.10.1007/s11661-016-3588-2 ↗
4. H. T. Kim, S. W. Nam and S. H. Hwang: J. Mater. Sci., 1996, vol. 31, pp. 2859-2864.10.1007/BF00355993 ↗
5. D. G. Eskin, L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp.629-711.10.1016/S0079-6425(03)00037-9 ↗
6. M. Lalpoor, D. G. Eskin and L. Katgerman: Metall. Mater. Trans. A., 2009, vol. 40, pp. 3304-3313.10.1007/s11661-009-0031-y ↗
7. M. Lalpoor, D. G. Eskin, D. Ruvalcaba, H. G. Fjaer, A. Ten Cate, N. Ontijt and L. Katgerman: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2831-2842.10.1016/j.msea.2010.12.040 ↗
8. T. Qi, H. Zhu, H. Zhang, J. Yin, L. Ke and X. Zeng: Mater. Des., 2017, vol.135, pp. 257-266.10.1016/j.matdes.2017.09.014 ↗
9. P. Skalicky, D. Koutny, L. Pantelejev and D. Palousek: 58th International Conference of Machine Design Departments, Prague, 2017.
10. A. Bhagavatam, A. Ramakrishnan, V. S. K. Adapa and G. P. Dinda: Int. J. Mat. Sci. Res., 2018, vol. 1, pp. 50-55.10.18689/ijmsr-1000108 ↗
11. N. Kaufmann, M. Imran, T. M. Wischeropp, C. Emmelmann, S. Siddique and F. Walther: Phys. Procedia, 2016, vol. 83, pp. 918-926.10.1016/j.phpro.2016.08.096 ↗
12. R. Mertens, S. Dadbakhsh, J. Van Humbeeck and J. P. Kruth: 10th CIRP Conference on Photonic Technologies (LANE 2018), Furth, 2018.
13. J. H. Martin, B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler and T. M. Pollock: Nature, 2017, vol. 549, pp. 365-369.10.1038/nature23894 ↗
14. M. L. Montero-Sistiaga, R. Mertens, B. Vrancken, X. Wang, B. Van Hooreweder, J. P. Kruth and J. Van Humbeeck: J. Mater. Process. Technol., 2016, vol. 238, pp. 437-445.10.1016/j.jmatprotec.2016.08.003 ↗
15. F. Czerwinski: J. Mater. Sci., 2019, vol. 55, pp. 24-72.10.1007/s10853-019-03892-z ↗
16. R. Ahmad and M. B. A. Asmael: J. Mater. Eng. Perform., 2016, vol. 25, pp. 2799-2813.10.1007/s11665-016-2139-8 ↗
17. W. Yuan, Z. Liang, C. Zhang and L. Wei: Mater. Des., 2012, vol. 34, pp. 788-792.10.1016/j.matdes.2011.07.003 ↗
18. D. Yao, F. Qiu, Q. Jiang, Y. Li and L. Arnberg: Int. J. Metalcast., 2013, vol. 7, pp. 49-54.10.1007/BF03355544 ↗
19. D. R. Manca, A. Y. Churyumov, A. V. Pozdniakov, A. S. Prosviryakov, D. K. Ryabov, A. Y. Krokhin, V. A. Korolev and D. K. Daubarayte: Met. Mater. Int., 2019, vol. 25, pp. 633-640.10.1007/s12540-018-00211-0 ↗
20. K. V. Yang, Y. Shi, F. Palm, X. Wu and P. Rometsch: Scr. Mater., 2018, vol. 145, pp. 113-117.10.1016/j.scriptamat.2017.10.021 ↗
21. K. Schmidtke, F. Palm, A. Hawkins and C. Emmelmann: Phys. Procedia., 2011, vol. 12, pp. 369-374.10.1016/j.phpro.2011.03.047 ↗
22. A. B. Spierings, K. Dawson, M. Voegtlin, F. Palm and P. J. Uggowitzer: CIRP Ann. Manu. Tech., 2016, vol. 65, pp. 213-216.10.1016/j.cirp.2016.04.057 ↗
23. Y. Shi, P. Rometsch, K. Yang, F. Palm and X. Wu: Mater. Lett., 2017, vol. 196, pp. 347-350.10.1016/j.matlet.2017.03.089 ↗
24. T. Zhao, W. Cai, M. Dahmen, J. Schaible, C. Hong, A. Gasser, A. Weisheit, T. Biermann, I. Kelbassa, H. Zhang, D. Gu and J. H. Schleifenbaum: Vacuum, 2018, vol. 158, pp. 121-125.10.1016/j.vacuum.2018.09.052 ↗
25. L. Zhou, H. Pan, H. Hyer, S. Park, Y. Bai, B. McWilliams, K. Cho and Y. Sohn: Scr. Mater., 2019, vol. 158, pp. 24-28.10.1016/j.scriptamat.2018.08.025 ↗
26. A. Plotkowski, O. Rios, N. Sridharan, Z. Sims, K. Unocic, R. T. Ott, R. R. Dehoff and S. S. Babu: Acta Mater., 2017, vol. 126, pp.507-519.10.1016/j.actamat.2016.12.065 ↗
27. Q. Jia, P. Rometsch, S. Cao, K. Zhang, A. Huang and X. Wu: Scr. Mater., 2018, vol. 151, pp. 42-46.10.1016/j.scriptamat.2018.03.035 ↗
28. Z. Cao, G. Kong, C. Che, Y. Wang and H. Peng: 2017, J. Rare Earths, vol. 35, pp. 1022-1027.10.1016/S1002-0721(17)61008-1 ↗
29. Computherm LLC. PanAluminum - thermodynamic database for multi-component aluminum-rich casting and wrought alloys, 2018.
30. S. Kou: JOM, 2003, vol. 55, pp. 37-42.10.1007/s11837-003-0137-4 ↗
31. H. Chen, S. X. Gao, P. A. Rometsch, D. Xu and B. C. Muddle: 12th International Conference on Aluminium Alloys, Yokohama, 2010.
32. W. Feng, X. Baiqing, Z. Yongan, L. Hongwei, L. Zhihui and L. Qiang: Mater. Sci. Eng. A., 2009, vol. 518, pp.144-149.10.1016/j.msea.2009.05.052 ↗
33. X. Fang, M. Song, K. Li, Y. Du, D. Zhao, C. Jiang and H. Zhang: J. Mater. Sci., 2012, vol. 47, pp. 5419-5427.10.1007/s10853-012-6428-9 ↗
34. Y. Li, Z. R. Zhang, Z. Y. Zhao, H. X. Li, L. Katgerman, J. S. Zhang and L. Z. Zhuang: Metall. Mater. Trans. A, 2019, vol. 50A, pp.3603-3616.10.1007/s11661-019-05268-z ↗
35. Y. Li, X. Gao, Z. R. Zhang, W. L. Xiao, H. X. Li, Q. Du, L. Katgerman, J. S. Zhang and L. Z. Zhuang: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 4744-4754.10.1007/s11661-017-4251-2 ↗
36. S. Kou: Weld. J., 2015, vol. 94, pp. 374–388.
37. C. Puncreobutr, A. B. Phillion, J. L. Fife and P. D. Lee: Acta Mater., vol. 64, pp. 316-325, 201410.1016/j.actamat.2013.10.044 ↗
38. W. Zheng, S. Li, B. Tang, D. Zeng and X. Guo: J. Rare Earths, 2006, vol. 24, pp. 346-351.10.1016/S1002-0721(06)60122-1 ↗
39. S. Xie, Y. Ai, X. Xia, R. Yi, Z. Gao and X. Guo: Adv. Mater. Res., 2011, 146, 481-484.10.4028/www.scientific.net/AMR.188.481 ↗
40. S. Kou: Acta Mater., 2015, vol. 88, pp. 366-374.10.1016/j.actamat.2015.01.034 ↗
41. M. A. Easton, M. A. Gibson, S. Zhu and T. B. Abbott: Metall. Mater. Trans. A, 2014, vol. 45A, pp.3586-3595.10.1007/s11661-014-2272-7 ↗
42. M. A. Easton, H. Wang, J. F. Grandfield, D. H. StJohn and E. Sweet: 2004, Mater. Forum, vol. 28, pp. 224-229.