Thermal Stability and Grain Growth Kinetics of Ultrafine-Grained W with Various Amount of La2O3 Addition
Source abstract
Abstract
In this study, ultrafine-grained W alloys with various amount of La2O3 addition (0.5 ~ 5.0 wt pct) have been prepared by pressureless sintering. The influence of the addition of La2O3 particles on the grain growth of ultrafine-grained W alloys have been studied. The results showed that the addition of La2O3 particles can significantly decrease the grain growth rate, but it seems counterintuitive that the ultrafine-grained W alloy with 2.0 wt pct La2O3 addition, rather than 5.0 wt pct, has the smallest grain size (1.23 μm) after annealing at 1900 °C for 6 h. To reveal the abnormal grain growth behavior, the inhibition effect of the size and distribution of La2O3 particles on grain growth was analyzed, suggesting that the excessive addition of La2O3 particles can cause an abnormal increase in grain size duo to the large fraction of intergranular particles, the small-particle spacing and the high mass transfer rate at the grain boundary.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 1. F. Ferroni, X. Yi, K. Arakawa, S. P. Fitzgerald, P. D. Edmondson and S. G. Roberts, Acta Mater. 2015, vol. 90, pp. 380-393.10.1016/j.actamat.2015.01.067 ↗
2. 2. L. Huang, L. Jiang, T. D. Topping, C. Dai, X. Wang, R. Carpenter, C. Haines and J. M. Schoenung, Acta Mater. 2017, vol. 122, pp. 19-31.10.1016/j.actamat.2016.09.034 ↗
3. 3. S. Antusch, D. E. J. Armstrong, T. B. Britton, L. Commin, J. S. K. L. Gibson, H. Greuner, J. Hoffmann, W. Knabl, G. Pintsuk, M. Rieth, S. G. Roberts and T. Weingaertner, Nucl. Mater. Energy 2015, vol. 3-4, pp. 22-31.10.1016/j.nme.2015.04.002 ↗
4. 4. Z. S. Levin and K. T. Hartwig, Mater. Sci. Eng. A 2017, vol. 707, pp. 602-611.10.1016/j.msea.2017.09.100 ↗
5. 5. Z. M. Xie, R. Liu, S. Miao, X. D. Yang, T. Zhang, X. P. Wang, Q. F. Fang, C. S. Liu, G. N. Luo, Y. Y. Lian and X. Liu, Sci. Rep. 2015, vol. 5, p. 16014.10.1038/srep16014 ↗
6. 6. C. Ren, Z. Z. Fang, L. Xu, J. P. Ligda, J. D. Paramore and B. G. Butler, Acta Mater. 2019, vol. 162, pp. 202-213.10.1016/j.actamat.2018.10.002 ↗
7. 7. X. Tan, L. Luo, H. Chen, X. Zhu, X. Zan, G. Luo, J. Chen, P. Li, J. Cheng, D. Liu and Y. Wu, Sci. Rep. 2015, vol. 5, p. 12755.10.1038/srep12755 ↗
8. 8. Z. M. Xie, S. Miao, R. Liu, L. F. Zeng, T. Zhang, Q. F. Fang, C. S. Liu, X. P. Wang, Y. Y. Lian, X. Liu and L. H. Cai, J. Nucl. Mater. 2017, vol. 496, pp. 41-53.10.1016/j.jnucmat.2017.09.022 ↗
9. 9. S. Bonk, J. Reiser, J. Hoffmann and A. Hoffmann, Int. J. Refract. Met. Hard Mater. 2016, vol. 60, pp. 92-98.10.1016/j.ijrmhm.2016.06.020 ↗
10. 10. M. Battabyal, R. Schäublin, P. Spätig, M. Walter, M. Rieth and N. Baluc, J. Nucl. Mater. 2013, vol. 442, pp. S225-S228.10.1016/j.jnucmat.2013.01.301 ↗
11. 11. Y. Wang and J. Aktaa, Scr. Mater. 2017, vol. 139, pp. 22-25.10.1016/j.scriptamat.2017.06.008 ↗
12. 12. Y. Wang and J. Aktaa, Materialia 2018, vol. 2, pp. 46-52.10.1016/j.mtla.2018.05.009 ↗
13. 13. J. Echigoya, M. Taya and WD Armstrong, Mater. Sci. Eng. A 1991, vol. 141, pp. 63-66.10.1016/0921-5093(91)90708-U ↗
14. 14. A. Luo, K. S. Shin and D. L. Jacobson, Mater. Sci. Eng. A 1991, vol. 148, pp. 219-229.10.1016/0921-5093(91)90824-7 ↗
15. 15. M. Xia, Q. Yan, L. Xu, H. Guo, L. Zhu and C. Ge, J. Nucl. Mater. 2013, vol. 434, pp. 85-89.10.1016/j.jnucmat.2012.11.017 ↗
16. 16. J. Li, J. Cheng, B. Wei, M. Zhang, L. Luo and Y. Wu, Int. J. Refract. Met. Hard Mater. 2017, vol. 66, pp. 226-233.10.1016/j.ijrmhm.2017.04.004 ↗
17. 17. R. Liu, Z. M. Xie, T. Zhang, Q. F. Fang, X. P. Wang, T. Hao, C. S. Liu and Y. Dai, Mater. Sci. Eng. A 2016, vol. 660, pp. 19-23.10.1016/j.msea.2016.02.072 ↗
18. Z. Dong, N. Liu, Z. Ma, C. Liu, Q. Guo, Z. A. Alothman, Y. Yamauchi, A. Hossain, M. Shahriar and Y. Liu, Sci. Rep. 2017, vol. 7, p. 6051.10.1038/s41598-017-06437-z ↗
19. 19. Z. Dong, N. Liu, Z. Ma, C. Liu, Q. Guo and Y. Liu, J. Alloys Compd. 2017, vol. 695, pp. 2969-2973.10.1016/j.jallcom.2016.11.364 ↗
20. 20. Y. Lv, J. Fan, Y. Han, T. Liu, P. Li and H. Yan, J. Alloys Compd. 2019, vol. 774, pp. 1140-1150.10.1016/j.jallcom.2018.09.163 ↗
21. 21. Z. Dong, N. Liu, W. Hu, Z. Ma, C. Li, C. Liu, Q. Guo and Y. Liu, J. Mater. Sci. Technol. 2020, vol. 36, pp. 118-127.10.1016/j.jmst.2019.05.067 ↗
22. 22. W. Hu, Z. Dong, L. Yu, Z. Ma and Y. Liu, J. Mater. Sci. Technol. 2020, vol. 36, pp. 84-90.10.1016/j.jmst.2019.08.010 ↗
23. N. Liu, Z. Dong, Z. Ma, Z. Qian, L. Ma, L. Yu and Y. Liu, Acta Metall. Sin. 2020, 1, pp. 1-6.
24. 24. R. Liu, X. P. Wang, T. Hao, C. S. Liu and Q. F. Fang, J. Nucl. Mater. 2014, vol. 450, pp. 69-74.10.1016/j.jnucmat.2013.05.049 ↗
25. S. Miao, Z. M. Xie, L. F. Zeng, T. Zhang, Q. F. Fang, X. P. Wang, C. S. Liu, G. N. Luo and X. Liu, Fusion Eng. Des. 2017. 16: 191-206
26. 26. Y. K. Wang, S. Miao, Z. M. Xie, R. Liu, T. Zhang, Q. F. Fang, T. Hao, X. P. Wang, C. S. Liu, X. Liu and L. H. Cai, J. Nucl. Mater. 2017, vol. 492, pp. 260-268.10.1016/j.jnucmat.2017.05.038 ↗
27. 27. M. Qin, Z. Chen, P. Chen, S. Zhao, R. Li, J. Ma and X. Qu, Int. J. Refract. Met. Hard Mater. 2017, vol. 68, pp. 145-150.10.1016/j.ijrmhm.2017.07.008 ↗
28. 28. M. Qin, J. Yang, Z. Chen, P. Chen, S. Zhao, J. Cheng, P. Cao, B. Jia, G. Chen, L. Zhang and X. Qu, Mater. Sci. Eng. A 2020, vol. 774, pp. 138878.10.1016/j.msea.2019.138878 ↗
29. 29. J. Fan, Y. Han, P. Li, Z. Sun and Q. Zhou, J. Nucl. Mater. 2014, vol. 455, pp. 717-723.10.1016/j.jnucmat.2014.09.037 ↗
30. 30. Z. Z. Fang and H. Wang, Int. Mater. Rev. 2008, vol. 53, pp. 326-352.10.1179/174328008X353538 ↗
31. 31. O. B. Bembalge and S. K. Panigrahi, Metall. Mater. Trans. A 2019, vol. 50, pp. 4288-4306.10.1007/s11661-019-05342-6 ↗
32. 32. H. Wang, Z. Z. Fang and K. S. Hwang, Metall. Mater. Trans. A 2011, vol. 42, pp. 3534-3542.10.1007/s11661-011-0751-7 ↗
33. 33. W. H. Liu, Y. Wu, J. Y. He, T. G. Nieh and Z. P. Lu, Scr. Mater. 2013, vol. 68, pp. 526-529.10.1016/j.scriptamat.2012.12.002 ↗
34. W. Ni, C. G. Schmidt, F. Teocoli, A. Kaiser, K. B. Andersen, S. Ramousse and V. Esposito, J. Eur. Ceram. Soc. 2013, vol. 33, pp. 2529-2537.10.1016/j.jeurceramsoc.2013.03.025 ↗
35. 35. N. Nafsin, J. A. Aguiar, T. Aoki, A. M. Thron, K. van Benthem and R. H. R. Castro, Acta Mater. 2017, vol. 136, pp. 224-234.10.1016/j.actamat.2017.07.005 ↗
36. 36. W. Ni, K. B. Andersen and V. Esposito, J. Eur. Ceram. Soc. 2014, vol. 34, pp. 3769-3778.10.1016/j.jeurceramsoc.2014.04.044 ↗
37. 37. T. Frolov, Q. Zhu, T. Oppelstrup, J. Marian and R. E. Rudd, Acta Mater. 2018, vol. 159, pp. 123-134.10.1016/j.actamat.2018.07.051 ↗
38. 38. G. Gottstein and L.S. Shvindlerman, Acta Metall. Mater. 1993, vol. 41, pp. 3267-3275.10.1016/0956-7151(93)90056-X ↗
39. 39. L. Jiang, H. Wen, H. Yang, T. Hu, T. Topping, D. Zhang, E. J. Lavernia and J. M. Schoenung, Acta Mater. 2015, vol. 89, pp. 327-343.10.1016/j.actamat.2015.01.062 ↗