journal article·2020-04

Austenite Grain Size Prediction in the Coarse-Grained Heat-Affected Zone of the Developed Cu-Free High-Strength Low-Alloy Hull Structure Steel

Xuan-Wei Lei, Shuan-Bao Zhou, Ji-Hua Huang

Publisher page

Abstract

The developed Cu-free high-strength low-alloy (HSLA) hull structure steel has wide potential applications because of its strength, good low-temperature toughness, and satisfactory weldability. As a significant part of microstructure characterization, austenite grain size in the coarse-grained heat-affected zone (CGHAZ) of this steel has not been investigated in any previous study. The present work has developed an equation considering the driving pressure and Zener pinning pressure to predict the austenite grain size in the CGHAZ of this developed Cu-free HSLA hull structure steel based on experimental data. In this equation, Zener pinning pressure is taken as a constant because of the high thermal stability of precipitate type I and relatively low thermal stability of precipitate type II in this steel. The results show this equation is applicable under heat input of 7.1 to 71.4 kJ/cm with peak temperature 1623 K to 1673 K (1350 °C to 1400 °C). In both theory and practice, the method for austenite grain size prediction in CGHAZ can be used for other steels that contain precipitates with similar properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. X. Luo, X. Chen, and Z. Wang: Steel Res. Int., 2017, vol. 88(11), pp. 170079(1–11).10.1002/srin.201700019 ↗
2. X. Luo, X. Chen, T. Wang, S. Pan and Z. Wang: Mater. Sci. Eng. A, 2018, vol. 710, pp. 192-99.10.1016/j.msea.2017.10.079 ↗
3. X.W. Lei, S. Dong, J.H. Huang, J. Yang, S.H. Chen and X.K. Zhao: Mater. Sci. Eng. A, 2018, vol. 718, pp. 437-48.10.1016/j.msea.2018.02.008 ↗
4. M.F. Ashby, K.E. Easterling: Acta Metall., 1982, vol. 30(11), pp. 1969-78.10.1016/0001-6160(82)90100-6 ↗
5. S. Mishra and T. DebRoy: Mater. Sci. Tech., 2006, vol. 22(3), pp.253-78.10.1179/174328406X84094 ↗
6. K. Banerjee, M. Militzer, M. Perez and X. Wang: Metall. Mater. Trans. A, 2010 vol. 41A, pp. 3161-72.10.1007/s11661-010-0376-2 ↗
7. J. Moon, J. Lee and C. Lee: Mat. Sci. Eng. A, 2007, vol. 459, pp. 40-46.10.1016/j.msea.2006.12.073 ↗
8. S. Dépinoy, B. Marini, C. Toffolon-Masclet, F. Roch and A.F. Gourgues-Lorenzon: Metall. Mater. Trans. A, 2017, vol. 48(5), pp. 2289-2300.10.1007/s11661-017-4002-4 ↗
9. L.M. Fu, H.R. Wang, W. Wang and A.D. Shan: Mater. Sci. Tech., 2011, vol. 27, pp. 996-01.10.1179/1743284711Y.0000000001 ↗
10. S. Sista, Z. Yang and T. DebRoy: Metall. Mater. Trans. B, 2000, vol. 31, pp. 529-36.10.1007/s11663-000-0158-0 ↗
11. M. Shome, O.P. Gupta and O.N. Mohanty: Scripta Mater., 2004, vol. 50, pp. 1007-10.10.1016/j.scriptamat.2003.12.030 ↗
12. S.J. Lee and Y.K. Lee: Mater. Design, 2008, vol. 29, pp. 1840-44.10.1016/j.matdes.2008.03.009 ↗
13. M. Shome and D.S. Sarma: ISIJ Int., 2003, vol. 43, pp. 1431-37.10.2355/isijinternational.43.1431 ↗
14. R.M. Miranda and M.A. Fortes: Mat. Sci. Eng. A, 1989, vol. 108, pp. 1-8.10.1016/0921-5093(89)90399-7 ↗
15. M. Maalekian, R. Radis, M. Militzer, A. Moreau and W. Poole: Acta Mater., 2012, vol. 60, pp. 1015-26.10.1016/j.actamat.2011.11.016 ↗
16. M. Shome and O.N. Mohanty: Metall. Mater. Trans. A, 2006, vol. 37, pp. 2159-69.10.1007/BF02586136 ↗
17. A.K. Giumelli, M. Militzer, E.B. Hawbolt: ISIJ Int., 1999, vol. 39, pp. 271-80.10.2355/isijinternational.39.271 ↗
18. D.B. Williams and C.B. Carter: Transmission Electron Microscopy, 1st ed., Springer, Boston, 1996, pp. 168.10.1007/978-1-4757-2519-3 ↗
19. J. Moon, S. Kim, J. Lee and C. Lee: Scripta Mater., 2007, vol. 56, pp. 1083-86.10.1016/j.scriptamat.2007.02.025 ↗
20. J. Moon, C. Lee, S. Uhm and J. Lee: Acta Mater., 2006, vol. 54, pp. 1053-61.10.1016/j.actamat.2005.10.037 ↗
21. M. PA, M. Ferry and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913-24.10.2355/isijinternational.38.913 ↗
22. R. Radis and E. Kozeschnik: Model. Simul. Mater. Sc., 2012, vol. 20(5), pp. 055010, 1-15.10.1088/0965-0393/20/5/055010 ↗
23. X.W. Lei, H.H. Wang, K.M. Wu, A. A. Shirzadi, Y. Q. Yin and N. C. Wu: Sci. Technol. Weld. Joi., 2014, vol. 19(5), pp. 402-07.10.1179/1362171814Y.0000000205 ↗
24. H. Ikawa, H. Oshige, S. Noi: Austenite grain growth of steel in weld-heat affected zone. T. JPN. Weld. Soc., 1977, vol. 8(2), pp. 132-37.