Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains
Source abstract
Abstract
The transport of solid crystals in the liquid pool during solidification of large ingots is known to have a significant effect on their final grain structure and macrosegregation. Numerical modeling of the associated physics is challenging since complex and strong interactions between heat and mass transfer at the microscopic and macroscopic scales must be taken into account. The paper presents a finite element multi-scale solidification model coupling nucleation, growth, and solute diffusion at the microscopic scale, represented by a single unique grain, while also including transport of the liquid and solid phases at the macroscopic scale of the ingots. The numerical resolution is based on a splitting method which sequentially describes the evolution and interaction of quantities into a transport and a growth stage. This splitting method reduces the non-linear complexity of the set of equations and is, for the first time, implemented using the finite element method. This is possible due to the introduction of an artificial diffusion in all conservation equations solved by the finite element method. Simulations with and without grain transport are compared to demonstrate the impact of solid phase transport on the solidification process as well as the formation of macrosegregation in a binary alloy (Sn-5 wt pct Pb). The model is also applied to the solidification of the binary alloy Fe-0.36 wt pct C in a domain representative of a 3.3-ton steel ingot.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. C. Beckermann: International Materials Review, 2002, vol. 47, pp. 243-262.10.1179/095066002225006557 ↗
2. T. Mazet: PhD thesis, Université de Lorraine, 1995.
3. J. Li, M. Wu, A. Ludwig, A. Kharicha: Int. J. Heat Mass Transf., 2014, vol. 72, pp. 668–679.10.1016/j.ijheatmasstransfer.2013.08.079 ↗
4. E.J. Pickering, M. Holland, Ironmak. Steelmak., 2014, vol. 41, pp. 493–499.10.1179/1743281213Y.0000000144 ↗
5. E. J. Pickering, C. Chesman, S. Al-Bermani, M. Holland, P. Davies, J. Talamantes-Silva: Metall. Mater. Trans. B, 2015, vol. 46, pp. 1860–187.10.1007/s11663-015-0386-y ↗
6. J. Ni, C. Beckermann: Metall. Mater. B, 1991, vol. 22B, pp. 349-361.10.1007/BF02651234 ↗
7. J. Ni, C. Beckermann: J. Mater. Process. Manuf. Sci., 1993, vol. 2, pp. 217-231.
8. M. Založnik, H. Combeau: Computational Materials Science, 2010, vol. 48, pp. 1-10.10.1016/j.commatsci.2009.04.036 ↗
9. C.Y. Wang, C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754-2764.10.1007/BF02652369 ↗
10. C.Y. Wang, C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2765-2783.10.1007/BF02652370 ↗
11. M. Založnik, A. Kumar, H. Combeau: Computational Materials Science, 2010, vol. 48, pp. 11-21.10.1016/j.commatsci.2009.10.013 ↗
12. A. Ludwig, M. Wu: Metall. Mater. Trans. A, 2002, 33A, pp. 3673-3683.10.1007/s11661-002-0241-z ↗
13. M. Wu, J. Li, A. Ludwig, A. Kharicha: Computational Materials Science, 2013, vol. 79, pp. 830-840.10.1016/j.commatsci.2013.05.015 ↗
14. M. Wu, J. Li, A. Ludwig, A. Kharicha: Computational Materials Science, 2014, vol. 92, pp. 267-285.10.1016/j.commatsci.2014.05.027 ↗
15. A. Plotkowski, M.J.M. Krane: Computational Materials Science, 2016, vol. 124, pp. 238-248.10.1016/j.commatsci.2016.07.029 ↗
16. W.S. Li, H.F. Shen, B.C. Liu: International Journal of Minerals, Metallurgy and Materials, 2012, vol. 19, pp. 787-794.10.1007/s12613-012-0629-8 ↗
17. Honghao Ge, Fengli Ren, Jun Li, Xiujun Han, Mingxu Xia, Jianguo Li: Metall. Mater. Trans. A, 2017, 48A, pp. 1139-1150.10.1007/s11661-016-3910-z ↗
18. H. Combeau, M. Založnik, S. Hans, P.E. Richy: Metall. Mater. Trans. B., 2009, vol. 40B, pp. 289-304.10.1007/s11663-008-9178-y ↗
19. H. Combeau, M. Založnik, M. Bedel: JOM, 2016, vol. 68, pp. 2198–2206.10.1007/s11837-016-1993-z ↗
20. N. Leriche, H. Combeau, C.-A. Gandin, M. Založnik: IOP Conf. Ser. Mater. Sci. Eng., 2015, vol. 84, p. 12087.10.1088/1757-899X/84/1/012087 ↗
21. D. Li, X.-Q. Chen, P. Fu, X. Ma, H. Liu, Y. Chen, Y. Cao, Y. Luan, Y. Li: Nat. Commun., 2014, vol. 5, p. 5572.10.1038/ncomms6572 ↗
22. M. Wu, A. Kharicha, A. Ludwig: Mater. China, 2015, vol. 34, pp. 640–651.
23. W. Tu, H. Shen, B. Liu: ISIJ Int., 2014, vol. 54, no. 2, pp. 351–355.10.2355/isijinternational.54.351 ↗
24. V. D. Fachinotti, S. Le Corre, N. Triolet, M. Bobadilla, M. Bellet: Int. J. Num. Meth. Eng., 2006, vol. 67, pp. 1341-1384.10.1002/nme.1664 ↗
25. T. Koshikawa, M. Bellet, C.-A. Gandin, H. Yamamura, M. Bobadilla: Acta Materialia, 2017, 124, pp. 513-527.10.1016/j.actamat.2016.11.023 ↗
26. M. Rappaz, M. Bellet, M. Deville: Numerical Modeling in Materials Science and Engineering, Springer-Verlag, Berlin Heidelberg, 2003.10.1007/978-3-642-11821-0 ↗
27. I. Christie, D.F. Griffiths, A.R. Mitchell, O.C. Zienkiewicz: Int. J. Num. Meth. Engrg., 1976, vol. 10, pp. 1389-1396.10.1002/nme.1620100617 ↗
28. J.C. Heinrich, P.S. Huyakorn, O.C. Zienkiewicz, A.R. Mitchell: Int. J. Num. Meth. Engrg, 1977, vol. 11, pp. 134-143.
29. T.J.R. Hughes: Int. J. Num. Meth. Engrg., 1978, vol. 12, pp. 1359-1365.10.1002/nme.1620120904 ↗
30. T.J.R. Hughes, J.D. Atkinson: Variational Methods in the Mechanics of Solids, Pergamon Press, Oxford, 1980, pp. 387-391.10.1016/B978-0-08-024728-1.50069-0 ↗
31. I. Harari, T.J.R. Hughes: Computer Methods in Applied Mechanics and Engineering, 1992, vol. 93, pp. 411-454.10.1016/0045-7825(92)90006-6 ↗
32. I. Harari, T.J.R. Hughes: Computer Methods in Applied Mechanics and Engineering, 1994, vol. 115, pp. 165-191.10.1016/0045-7825(94)90193-7 ↗
33. F. Brezzi, A. Russo: Math. Models Methods Appl. Sci., 1994, vol. 4, pp. 571-587.10.1142/S0218202594000327 ↗
34. D. Kuzmin, S. Turek: J. Comput. Physics, 2002, vol. 175, pp. 525-558.10.1006/jcph.2001.6955 ↗
35. W. Cook, W.H. Cabot: J. Comput. Physics, 2003, vol. 195, pp. 594-601.10.1016/j.jcp.2003.10.012 ↗
36. P. Agarwal, B. K. O’Neill: Chem. Eng. Sci., 1998, vol. 43, pp. 2487-2499.10.1016/0009-2509(88)85183-2 ↗
37. E. Hachem, B. Rivaux, T. Kloczko, H. Digonnet, T. Coupez: J. Comput. Physics, 2010, vol. 229, pp. 8643–8665.10.1016/j.jcp.2010.07.030 ↗
38. D.J. Hebditch, J.D. Hunt: Metallurgical Transactions, 1974, vol. 5, pp. 1557–1564.10.1007/BF02646326 ↗
39. N. Ahmad, J. Rappaz, J.-L. Desbiolles, T. Jalanti, M. Rappaz, H. Combeau, G. Lesoult, C. Stomp: Metallurgical and Materials Transactions A, 1998, vol. 29, pp. 617-630.10.1007/s11661-998-0143-9 ↗
40. H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar, Ch.-A. Gandin, B. Goyeau, S. Mosbah, T. Quatravaux, M. Rady, M. Založnik: IOP Conference Series: Materials Science and Engineering, 2012, vol. 33, 012086.10.1088/1757-899X/33/1/012086 ↗
41. K.O. Tveito, M. Bedel, M. Založnik, H. Combeau, M. M’Hamdi: IOP Conf. Series: Materials Science and Engineering, 2011, vol. 27, 012040.10.1088/1757-899X/27/1/012040 ↗