Modeling and Analysis of High-Energy Ball Milling Through Attritors
Source abstract
Abstract
The effects of major processing parameters of attritor mills on ball milling efficiency (i.e., minimum energy consumption with maximum milling progress) are investigated using discrete element modeling (DEM). The major processing parameters investigated include the size of balls, ball volume fraction inside the canister, ball milling velocity, and design of the impeller shaft of the attritor mill. Their effects are studied through examination of the output parameters including the average speed of balls, maximum speed of balls, and torque applied on the impeller shaft. The torque on the impeller shaft represents the energy consumption during ball milling, while the difference between the maximum and average speeds of balls scales with the compressive pressure during “mini-forging” of powder particles trapped between the colliding balls and thus scales with milling progress (particle deformation and size reduction). The simulation reveals that the ball milling velocity, ball volume fraction inside the canister, ball size, and impeller shaft design are all important parameters for energy-efficient ball milling. In particular, high ball milling velocities can lead to larger particle deformation and faster size reduction with minimum energy consumption. Further, ball sizes smaller than the gap that will not be hit by impellers directly are good for high-energy-efficient ball milling. Otherwise, energy consumption increases substantially.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mineral Processing and Grinding · Metallurgy and Material Forming · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. P. S. Gilman and J. S. Benjamin, Annu. Rev. Mater. Sci., 1983, vol. 13, pp. 279-300.10.1146/annurev.ms.13.080183.001431 ↗
2. J. S. Benjamin and T. E. Volin, Metall. Trans., 1974, vol. 5, pp. 1929-34.10.1007/BF02644161 ↗
3. F.H. Froes, and J.J. de Barbadillo (eds.), Structural Applications of Mechanical Alloying, ASM International, Metals Park, OH, 1990.
4. R. Nagarajan, B.S. Murty, and S. Ranganathan: Chin. J. Mater. Res., 1994, vol. 5(Suppl.), pp. 215–20.
5. E. Wang, G. Liang, and X. Wang: Chin. J. Mater. Res., 1994, vol. 5(Suppl.), pp. 202–05.
6. R. Schulz, L. Dignard-Bailey, M.L. Trudeau, J.Y. Huot, and Z.H. Yan: in Nanophase and Nanocomposite Materials, S. Komarneni, J.C. Parker, and G.J. Thomas, eds., Mat. Res. Soc. Symp. Proc., Vol. 286, Materials Research Society, Pittsburgh, PA, 1993, pp. 221–26.10.1557/PROC-286-221 ↗
7. S. Ochiai and Y. Hirotsu, Chin. J. Mater. Res., 1994, vol. 5(Suppl.), pp. 308–311.
8. W. L. Johnson and H. J. Fecht, J. Less Common Met., 1988, vol. 145, pp. 63-80.10.1016/0022-5088(88)90263-9 ↗
9. C.C. Koch: Nanophases and Nanocrystalline Structures, R.D. Shull and J.M. Sanchez, eds., The Minerals, Metals & Materials Society, Warrendale, PA, 1994, pp. 19–31.
10. H. J. Fecht, E. Hellstern, Z. Fu and W. L. Johnson, 1990, Metall. Trans., vol. 21A, pp. 2333-2337.10.1007/BF02646980 ↗
11. H. J. Fecht, Nanostruct. Mater., 1992, vol. 1, pp.125-130.10.1016/0965-9773(92)90064-5 ↗
12. J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: in Mechanical Alloying, Materials Science Forum, Vols. 88–90, P.H. Shingu, ed., Trans Tech Publications Ltd, Switzerland, 1992, pp. 505–12.10.4028/www.scientific.net/MSF.88-90.505 ↗
13. R. B. Schwarz, S. R. Srinivasan, J. J. Petrovic and C. J. Maggiore, Mater. Sci. Eng., 1992, vol. A155, pp. 75-83.10.1016/0921-5093(92)90314-Q ↗
14. S. Jayashankar and M. J. Kaufman, Scripta Metall. Mater., 1992, vol. 26, pp. 1245-1250.10.1016/0956-716X(92)90571-U ↗
15. A. Calka, A. P. Radlinski, R. A. Shanks and A. P. Pogany, J. Mater. Sci. Letter, 1991, vol. 10, pp. 734-737.10.1007/BF00722784 ↗
16. Z. G. Yang and L. Shaw, Nanostruct. Mater., 1996, vol. 7, pp. 873-886.10.1016/S0965-9773(96)00058-X ↗
17. A. Calka and J. S. Williams, Scripta Metall. 1992, Mater., vol. 27, pp. 999-1004.10.1016/0956-716X(92)90463-O ↗
18. G. Le Caer, E. Bauer-Grosse, A. Pianelli, E. Bouzy and P. Matteazzi, 1990, J. Mater. Sci., vol. 25, pp. 4726-4731.10.1007/BF01129932 ↗
19. R.-M. Ren, Z.-G. Yang and L. Shaw, J. Mater. Sci., 2000, vol. 35, pp. 6015-6026.10.1023/A:1026751017284 ↗
20. L. Shaw, X.-Q. Xie, Z.-G. Yang and R.-M. Ren, Scripta Mater., 1998, vol. 39, pp. 1169-1175.10.1016/S1359-6462(98)00313-3 ↗
21. D. M. Maurice and T. H. Courtney, Metall. Trans. A, 1990, vol. 21A, pp. 289–303.10.1007/BF02782409 ↗
22. B. J. M. Aikin and T. H. Courtney, Metall. Trans. A, 1993, vol. 24A, pp. 647-657.10.1007/BF02656633 ↗
23. B. J. M. Aikin and T. H. Courtney, Metall. Trans. A, 1993, vol. 24A, pp. 2465-2471.10.1007/BF02646525 ↗
24. B. J. M. Aikin, T. H. Courtney and D. R. Maurice, 1991, Mater. Sci. Eng. A, vol. 147, pp. 229-237.10.1016/0921-5093(91)90850-M ↗
25. D. M. Maurice and T. H. Courtney, Metall. Mater. Trans. A, 1994, vol. 25A, pp. 147-158.10.1007/BF02646683 ↗
26. D. M. Maurice and T. H. Courtney, Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2431-2435.10.1007/BF02671257 ↗
27. D. M. Maurice and T. H. Courtney, Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2437-2444.10.1007/BF02671258 ↗
28. J. R. Harris, J. A. D. Wattis and J. V. Wood, Acta Mater., 2001, vol. 49, pp. 3991-4003.10.1016/S1359-6454(01)00302-0 ↗
29. A.Y. Badmos and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2189–94.10.1007/s11661-997-0176-5 ↗
30. I. Borner and J. Eckert, Mater. Sci. Eng. A, 1997, vol. 226-228, pp. 541-545.10.1016/S0921-5093(97)80063-9 ↗
31. R. W. Rydin, D. M. Maurice and T. H. Courtney, Metall. Trans. A, 1993, vol. 24A, pp. 175-185.10.1007/BF02669614 ↗
32. D. M. Maurice and T. H. Courtney, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1973-1979.10.1007/BF02651946 ↗
33. D. M. Maurice and T. H. Courtney, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1981-1986.10.1007/BF02651947 ↗
34. R. M. Davis, B. McDermott and C. C. Koch, Metall. Trans. A, 1988, vol. 19A, pp. 2867-2874.10.1007/BF02647712 ↗
35. T. S. Ward, W. Chen, M. Schoenitz, R. N. Dave and E. L. Dreizin, Acta Mater., 2005, vol. 53, pp. 2909-2918.10.1016/j.actamat.2005.03.006 ↗
36. X. Jiang, M. A. Trunov, M. Schoenitz, R. N. Dave, and E. L. Dreizin, J. Alloys Compounds, 2009, vol. 478, pp. 246-251.10.1016/j.jallcom.2008.12.021 ↗
37. P. R. Santhanam and E. L. Dreizin, Powder Technol., 2012, vol. 221, pp. 403-411.10.1016/j.powtec.2012.01.037 ↗
38. P. R. Santhanam, A, Ermoine and E. L. Dreizin, Chem. Eng. Sci., 2013, vol. 101, pp. 366-373.10.1016/j.ces.2013.06.048 ↗
39. C. Suryanarayana, Prog. Mater. Sci., 2001, vol. 46, pp. 1-184.10.1016/S0079-6425(99)00010-9 ↗
40. C. Suryanarayana and N. Al-Aqeeli, Prog. Mater. Sci., 2013, vol. 58, pp. 383-502.10.1016/j.pmatsci.2012.10.001 ↗
41. T. M. Cook and T. H. Courtney, Metall. Mater. Trans. A, 1995, vol. 26, pp. 2389-2397.10.1007/BF02671252 ↗