The Role of Si and Cu Alloying Elements on the Dendritic Growth and Microhardness in Horizontally Solidified Binary and Multicomponent Aluminum-Based Alloys
Source abstract
Abstract
Horizontal directional solidification (HDS) experiments were carried out with Al-3wtpctCu, Al-3wtpctSi, and Al- 3wtpctCu-5.5wtpctSi alloys in order to analyze the interrelation between the secondary dendrite arm spacing (λ 2) and microhardness (HV). A water-cooled horizontal directional solidification device was applied. Microstructural characterization has been carried out using traditional techniques of metallography, optical, and SEM microscopy. The ThermoCalc software was used to generate the phase equilibrium diagrams as a function of Cu and Si for the analyzed alloys. The effects of Si and Cu elements on the λ 2 and HV evolution of the hypoeutectic binary Al-Cu and Al-Si alloys have been analyzed as well as the addition of Si in the formation of ternary Al-Cu-Si alloy. The secondary dendrite arm spacing was correlated with local solidification thermal parameters such as growth rate (V L), cooling rate (T R), and local solidification time (t SL). This has allowed to observe that power experimental functions given by λ 2 = Constant (V L)−2/3, λ 2 = Constant (T R)−1/3 and λ 2 = Constant (t SL)1/3 may represent growth laws of λ 2 with corresponding thermal parameters for investigated alloys. Hall–Petch equations have also been used to characterize the dependence of HV with λ 2. A comparative analysis is performed between λ 2 experimental values obtained in this study for Al-3wtpctCu-5.5wtpctSi alloy and the only theoretical model from the literature that has been proposed to predict the λ 2 growth in multicomponent alloys. Comparisons with literature results for upward directional solidification were also performed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. G. García-García, J. Espinoza-Cuadra and H. Mancha-Molinar: Mater. Des., 2007, vol. 28, pp. 428-33.10.1016/j.matdes.2005.09.021 ↗
2. L.G. Gomes, D.J. Moutinho, I. L. Ferreira, O.L. Rocha and A. Garcia: Appl. Mech. Mater., 2015, vol. 719-20, pp. 102-05.10.4028/www.scientific.net/AMM.719-720.102 ↗
3. I.L. Ferreira, D.J. Moutinho, L.G. Gomes, O.L. Rocha and A. Garcia: Phil. Mag. Lett., 2009, vol. 89, pp. 769-77.10.1080/09500830903292320 ↗
4. J.N. Silva, D.J. Moutinho, A.L. Moreira, I.L. Ferreira and O.L. Rocha: J Alloys Compd., 2009, vol. 478, pp. 358-66.10.1016/j.jallcom.2008.11.026 ↗
5. O.L. Rocha, C.A. Siqueira and A. Garcia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 995-1006.10.1007/s11661-003-0229-3 ↗
6. M.D. Peres, C.A. Siqueira and A. Garcia: J. Alloys Compd., 2004, vol. 381, pp.168-81.10.1016/j.jallcom.2004.03.107 ↗
7. I.L. Ferreira, D.J. Moutinho, L.G. Gomes, O.L. Rocha, P.R. Goulart and Garcia A: Mater. Sci. Forum, 2010, vol. 636-37, pp. 643-50.10.4028/www.scientific.net/MSF.636-637.643 ↗
8. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 651-63.10.1007/s11663-997-0039-x ↗
9. M. Rappaz and W.J. Boettinger: Acta Mater., 1999, vol. 47, pp. 3205-19.10.1016/S1359-6454(99)00188-3 ↗
10. D.H. Kirkwood: Mater. Sci. Eng., 1985, vol. 73, pp. L1-4.10.1016/0025-5416(85)90319-2 ↗
11. T.A. Costa, A.L. Moreira, D.J. Moutinho, M. Dias, I.L. Ferreira, J.E. Spinelli, O.L. Rocha and A. Garcia: Mater Sci Technol, 2015, vol. 31, pp. 1103-12.10.1179/1743284714Y.0000000678 ↗
12. H. Kaya, E. Çadırlı, U. Böyük and N. Maraslı: Appl. Surf. Sci, 2008, vol. 255, pp. 3071-78.10.1016/j.apsusc.2008.08.080 ↗
13. H. Kaya, U. Böyük, E. Çadırlı and N. Maraslı: Mater. Des., 2012, vol. 34, pp. 707-12.10.1016/j.matdes.2011.05.030 ↗
14. J.E. Spinelli, D.M. Rosa, I.L. Ferreira and A. Garcia: Mater. Sci. Eng. A, 2004, vol. 383, pp. 271-82.10.1016/S0921-5093(04)00831-7 ↗
15. M.J. SukJ, Y.M. Park and Y.D. Kimb: Scripta Mater., 2007, vol. 57, pp. 985-87.10.1016/j.scriptamat.2007.08.013 ↗
16. E. Çadirli: Met. Mater. Int., 2013, vol. 19, pp. 411-22.10.1007/s12540-013-3006-x ↗
17. M. Dias, T. Costa, O. Rocha, J. E. Spinelli, N. Cheung and A. Garcia: Mater. Charact., 2015, vol. 106, pp. 52-6.10.1016/j.matchar.2015.05.015 ↗
18. A.S. Barros, I. A. Magno, F.A. Souza, C. A. Mota, A.L. Moreira, M.A. Silva and O. L. Rocha: Met. Mater. Int., 2015, vol. 21, pp. 429-39.10.1007/s12540-015-4499-2 ↗
19. O.P. Modi, N. Deshmukh, D.P. Mondal, A.K. Jha, A.H. Yegneswaran and H.K. Khaira: Mater. Charact., 2001, vol. 46, pp. 347-52.10.1016/S1044-5803(00)00113-3 ↗
20. H. Kaya, U. Böyük, E. Çadırlı, and N. Maraslı: Met. Mater. Int., 2013, vol. 19, pp. 39-44.10.1007/s12540-013-1007-4 ↗
21. K.S. Cruz, E.S. Meza, F.A.P. Fernandes, J.M.V. Quaresma, L.C. Casteletti and A. Garcia: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 972-84.10.1007/s11661-009-0161-2 ↗
22. M.V. Canté, J.E. Spinelli, N. Cheung and A. Garcia: Met. Mater. Int., 2010, vol. 16, pp. 39-49.10.1007/s12540-010-0039-2 ↗
23. C. Brito, T.A. Costa, T.A. Vida, F. Bertelli, N. Cheung, J.E. Spinelli and A. Garcia: Metall. Mater. Trans. A, 2015, vol 46A, pp. 3342-55.10.1007/s11661-015-2967-4 ↗
24. C.H.U. Gomes, R.H.L. Kikuchi, A.S. Barros, J.N.S. Silva, M.A.P.S. Silva, A.L.S. Moreira and O.F.L. Rocha: Mater. Res., 2015, vol 18, pp 1362-71.10.1590/1516-1439.036315 ↗
25. E. Çadirli, H. Kaya and M. Gündüz: J. Alloys Compd., 2007, vol. 431, pp. 171-79.10.1016/j.jallcom.2006.05.073 ↗
26. E. Çadirli and M. Gündüz: J. Mater. Sci., 2000, vol. 35, pp. 3837-48.10.1023/A:1004829413966 ↗
27. M. Gündüz and E. Çadirli: Mater. Sci. Eng., A, 2002, vol. 327, pp. 167-85.10.1016/S0921-5093(01)01649-5 ↗
28. H. Kaya, E. Çadirli and M. Gündüz: J. Mater. Eng. Perform., 2007, vol. 16, pp. 12-21.10.1007/s11665-006-9002-2 ↗
29. S.P. O’Dell, G.L. Ding and S.N. Tewari: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2159-65.10.1007/s11661-999-0027-7 ↗
30. E. Acer, E. Çadirli, H. Erol and M. Gündüz: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3040-51.10.1007/s11661-016-3484-9 ↗
31. J.M.V. Quaresma, C.A. Santos and A. Garcia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3167-78.10.1007/s11661-000-0096-0 ↗
32. J. Chen, S.N. Tewari, G. Magadi, H.C. de Groh III: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2985-90.10.1007/s11661-003-0197-7 ↗
33. W.R. Osório, P.R. Goulart, G.A. Santos, C.M. Neto and A. Garcia: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2525-38.10.1007/BF02586225 ↗
34. A. Noeppel, A. Ciobanas, X.D. Wang, K. Zaidat, N. Mangelinck, O. Budenkova, A. Weiss, G. Zimmermann and Y. Fautrelle: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 193-08.10.1007/s11663-009-9311-6 ↗
35. R.H. Mathiesen, L. Arnberg, Y. Li, V. Meier, P.L. Schaffer, I. Snigireva, A. Snigirev and A.K. Dahle: Metall. Mater. Trans. A, 2010, vol. 42A, pp. 170-80.
36. D. Mirkovic´ and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 958–73.10.1007/s11661-009-9787-3 ↗
37. D. Mirkovic´ and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 974–98.10.1007/s11661-009-9788-2 ↗
38. M. Easton, C. Davidson and D. John: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1528–38.10.1007/s11661-010-0183-9 ↗
39. G. Jiang, Y. Li and Y. Liu: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3405-11.10.1007/s11661-010-0402-4 ↗
40. K. Cruz, N. Cheung and A. Garcia: Tec. Metal. Mater., 2008, vol. 4, pp. 21-26.
41. G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noel, N. Bergeon, T. Schenk, J. Hartwig and J. Baruchel: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 865-74.10.1007/s11661-007-9449-2 ↗
42. J.D. Hunt and S.Z. Lu: Metall. Mater. Trans. A, 1966, vol. 27A, pp. 611-23.
43. J.D. Hunt: Int. Conf. on Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 3-9.
44. W. Kurz and J.D. Fisher: Acta Metall., 1981, vol. 29, pp. 11-20.10.1016/0001-6160(81)90082-1 ↗
45. W. Kurz and J.D. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1992, pp. 85-90.
46. R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, vol. 39, pp. 49-74.10.1179/imr.1994.39.2.49 ↗
47. T. Okamoto and K. Kishitake: J. Cryst. Growth, 1975, vol. 29, pp. 137-46.10.1016/0022-0248(75)90217-1 ↗
48. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444-51.10.1063/1.1713333 ↗
49. U. Feurer, R. Wunderlin, in: W. Kurz, D.J. Fisher (Eds.), Fundamentals of Solidification, Appendix 8, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1986, pp. 214–16.