Effects of Solute Nb Atoms and Nb Precipitates on Isothermal Transformation Kinetics from Austenite to Ferrite
Source abstract
Abstract
Nb is a very important micro-alloying element in low-carbon steels, for grain size refinement and precipitation strengthening, and even a low content of Nb can result in a significant effect on phase transformation kinetics from austenite to ferrite. Solute Nb atoms and Nb precipitates may have different effects on transformation behaviors, and these effects have not yet been fully characterized. This paper examines in detail the effects of solute Nb atoms and Nb precipitates on isothermal transformation kinetics from austenite to ferrite. The mechanisms of the effects have been analyzed using various microscopy techniques. Many solute Nb atoms were found to be segregated at the austenite/ferrite interface and apply a solute drag effect. It has been found that solute Nb atoms have a retardation effect on ferrite nucleation rate and ferrite grain growth rate. The particle pinning effect caused by Nb precipitates is much weaker than the solute drag effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A. J. DeArdo: Proc. Int. Symp. Niobium 2001, TMS. Orlando. 2001. p. 427.
2. F. Fazeli, and M. Militzer: J. Iron Steel. Res. Int., 2011, vol. 18, no. 1, pp. 658-663.
3. N. Fujita, and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, no. 4, pp. 403-408.10.1179/026708301101510122 ↗
4. J. Kim, J. G. Jung, D. H. Kim, Y. K. Lee: Acta Mater., 2013, vol. 61, no.19, pp. 7437– 7443.10.1016/j.actamat.2013.08.052 ↗
5. E. G. Dere, H. Sharma, S. E. Offerman, J. Sietsma: Solid State Phenomena, 2011. vols. 172-174, pp. 499-504.10.4028/www.scientific.net/SSP.172-174.499 ↗
6. M. Gomez, S. F. Medina, A. Quispe, and P. Valles: ISIJ Int., 2002, vol. 42, no.4, pp. 423-431.10.2355/isijinternational.42.423 ↗
7. C. Fossaert, G. I. Rees, T. Maurickx, and H. K. D. H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26, pp. 21-30.10.1007/BF02669791 ↗
8. F. De Kazinczy, A. Axnas, and P. Pachleitner: Jernkont Ann, 1963, vol. 147, pp. 408–33.
9. G. I. Rees, J. Perdrix, T. Maurickx, and H. K. D. H. Bhadeshia: Mater. Sci. Eng. A, 1995, vol. 194, pp. 179-186.10.1016/0921-5093(94)09673-2 ↗
10. S. C. Hong, S. H. Lim, K. J. Lee, D. H. Shin, and K. S. Lee: ISIJ Int., 2002, vol. 42, no. 12, pp. 1461-1467.10.2355/isijinternational.42.1461 ↗
11. J. Cao, Q. Liu, Q. Yong, and X. Sun: J. Iron. Steel. Res. Int., 2007, vol. 14, no. 3, pp. 51-55.10.1016/S1006-706X(07)60043-0 ↗
12. M. Gomez, S. F. Medina, and P. Valles: ISIJ Int., 2005, vol. 45, no. 11, pp. 1711-1720.10.2355/isijinternational.45.1711 ↗
13. M. G. Akben, I. Weiss, and J. J. Jonas: Acta Metall., 1981, vol. 29, no. 1, pp. 111-121.10.1016/0001-6160(81)90092-4 ↗
14. S. H. Cho, K. B. Kang, and J. J. Jonas: ISIJ Int., 2001, vol. 41, no.1, pp. 63–69.10.2355/isijinternational.41.63 ↗
15. Y. C. Jung, H. Ueno, H. Ohtsubo, K. Nakai, and Y. Ohmori: ISIJ Int., 1995, vol. 35, no.8, pp. 1001-1005.10.2355/isijinternational.35.1001 ↗
16. M. Suehiro, Z. K. Liu, and J. Agren: Acta Mater., 1996, vol. 44, no.10, pp. 4241-4251.10.1016/S1359-6454(96)00036-5 ↗
17. M. Militzer, E. B. Hawbolt, and T. R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31, no.4, pp. 1247-1259.10.1007/s11661-000-0120-4 ↗
18. L. Wang, S. V. Parker, A. J. Rose, G. D. West, and R. C. Thomson: J. Iron Steel. Res. Int., 2011, vol. 18, no. 1, pp. 208-212.
19. J. W. Cahn: Acta Metall., 1962, vol. 10, no.9, pp. 789-798.10.1016/0001-6160(62)90092-5 ↗
20. M. Hillert, and B. Sundman: Acta Metall., 1976, vol. 24, no. 8, pp. 731-743.10.1016/0001-6160(76)90108-5 ↗
21. G. R. Purdy, and Y. J. M. Brechet: Acta Metall. Mater., 1995, vol. 43, no.10, pp. 3763-3774.10.1016/0956-7151(95)90160-4 ↗
22. M. Enomoto: Acta Mater., 1999, vol. 47, no. 13, pp. 3533-3540.10.1016/S1359-6454(99)00232-3 ↗
23. P. J. Felfer, C. R. Killmore, J. G. Williams, K. R. Carpenter, S. P. Ringer, and J. M. Cairney: Acta Mater., 2012, vol. 60. no.13, pp. 5049-5055.10.1016/j.actamat.2012.06.013 ↗
24. F. Fazeli, and M. Militzer:Metall. Mater. Trans. A, 2005, vol. 36, no.6, pp. 1395-1405.10.1007/s11661-005-0232-y ↗
25. T. Furuhara, T. Yamaguchi, G. Miyamoto, and T. Maki: Mater. Sci. Tech., 2010, vol. 26, no.4, pp. 392-397.10.1179/026708309X12512744 ↗
26. J. Crank: The Mathematics of Diffusion, p. 11, Clarendon Press, Oxford, 1975.
27. K. J. Lee, and J. K. Lee: Scripta Mater., 1999, vol. 40, no. 7, pp. 831–36.10.1016/S1359-6462(99)00025-1 ↗
28. M. H. Thomas and G. M. Michal: Proc. of Int. Conf. on Solid-Solid Phase Transform., TMS of AIME, Pittsburgh, 1981, p. 469.