Achieving High Strength Joint of Pure Copper Via Laser-Cold Metal Transfer Arc Hybrid Welding
Source abstract
Abstract
Fiber laser-cold metal transfer arc hybrid welding of pure copper was studied. Weld porosity was tested by X-ray nondestructive testing. Microstructure and fracture features were observed by scanning electron microscopy. Mechanical properties were evaluated by cross weld tensile test. Full penetrated and continuous welds were obtained by hybrid welding once the laser power reached 2 kW, while they could not be obtained by laser welding alone, even though the laser power reached 5 kW. The ultimate tensile strength (UTS), the yield strength (YS), and the elongation of the best hybrid weld material were up to 227, 201 MPa, and 21.5 pct, respectively. The joint efficiencies in UTS and YS of hybrid weld were up to 84 and 80 pct of the BM, respectively. The fracture location changes from the fusion zone to the heat-affected zone with the increase of laser power. Besides, the mechanisms of process stability and porosity suppression were clarified by laser–arc interaction and pool behavior. The strengthening mechanism was discussed by microstructure characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Y. Li, and Z. Peng: Inform. Tech. J., 2013, vol. 12(13), pp. 2526–32.10.3923/itj.2013.2526.2532 ↗
2. R. Pohja, H. Vestman, P. Jauhiainen and H. Hanninen: Narrow Gap Arc Welding Experiments of Thick Copper Sections, Helsinki University of Technology, Finland, 2003, pp. 3–12.
3. L. Wang, G. Wei, H. Gao and J. Yao: Weld. Tech., 2011, vol. 40(8), pp. 10–14. [in Chinese].
4. E. Biro, D. C. Weckman and Y. Zhou: Metall. Mater. Trans. A, 2001, vol. 33A, pp. 2002–19.
5. H. Chen, G. Bi, M.S.L. Nai and J. Wei: J. Mater. Process. Tech., 2015, vol. 216, pp. 287–93.10.1016/j.jmatprotec.2014.09.020 ↗
6. M. Gao, Y. Cao, X.Y. Zeng and J. Hu: J. Alloys. Compd., 2011, vol. 509, pp. 953–56.10.1016/j.jallcom.2010.09.142 ↗
7. A. Heider, P. Stritt, A. Hess, R. Weber and T. Graf: Phys. Procedia, 2011, vol. 12, pp. 81–87.10.1016/j.phpro.2011.03.011 ↗
8. A. Hess, R. Schuster, A. Heider, R. Weber and T. Graf: Phys. Procedia, 2011, vol. 12, pp. 88–94.10.1016/j.phpro.2011.03.012 ↗
9. B. Ribic, T.A. Palmer, T. DebRoy: Int. Mater. Rev., 2009,vol. 54, pp. 223–44.10.1179/174328009X411163 ↗
10. C. Bagger, and F. O. Olsen: J. Laser Appl., 2005, vol. 17, pp. 2–14.10.2351/1.1848532 ↗
11. C. Zhang, M. Gao, G. Li, C. Chen and X.Y. Zeng:, Sci. Tech. Weld. Join., 2013, vol. 18, pp. 703–10.10.1179/1362171813Y.0000000153 ↗
12. C. Zhang, G. Li, M. Gao, J. Yan and X.Y. Zeng: Int. J. Adv. Manuf. Technol., 2013, vol. 68, pp. 1253–60.10.1007/s00170-013-4916-y ↗
13. L. M. Liu, G. Song and M. L. Zhu: Metall. Mater. Trans. A, 2008, vol. 39A, pp.1702–11.10.1007/s11661-008-9533-2 ↗
14. M. Gao, S.W. Mei, Z.M. Wang, X.Y. Li and X.Y. Zeng: J. Mater. Process. Tech., 2012, vol. 212, pp. 1338–46.10.1016/j.jmatprotec.2012.01.011 ↗
15. L. Zhang, J. Ning, X. Zhang, G. Zhang and J. Zhang: Mater. Des., 2015, vol. 74, pp. 1–18.10.1016/j.matdes.2015.02.027 ↗
16. S.W. Mei, M. Gao, J. Yan, C. Zhang, G. Li, and X.Y. Zeng: Sci. Tech. Weld. Join., 2013, vol. 18, pp. 293–300.10.1179/1362171813Y.0000000106 ↗
17. S. Engler, R. Ramsayer and R. Poprawe: Phys. Procedia, 2011, vol. 12, pp. 339–46.10.1016/j.phpro.2011.03.142 ↗
18. A. Hess, R. Weber, A. Heider and T. Graf: Phys. Procedia., 2010, vol. 5, pp. 29–36.10.1016/j.phpro.2010.08.026 ↗
19. T. Tsukamoto, I. Kawaguchi, G. Arakane and H. Honda: SPIE, 2003, vol. 4831, pp. 176–83.
20. A. Heider, R. Weber, D. Herrmann, P. Herzog and T. Graf: J. Laser. Appl., 2015, vol. 27, 022003.10.2351/1.4906127 ↗
21. A. Heider, J. Sollinger, F. Abt, M. Boley, R. Weber and T. Graf: Phys. Procedia, 2013, vol. 41, pp. 112-18.10.1016/j.phpro.2013.03.058 ↗
22. A. Matsunawa: Sci. Tech. Weld. Join., 2001, vol. 6, pp. 351-254.10.1179/stw.2001.6.6.351 ↗
23. B. Ribic, R. Rai, T. DebRoy: Sci. Tech. Weld. Join., 2009, vol. 13, pp. 683–93.10.1179/136217108X356782 ↗
24. M. Gao, X. Y. Zeng, B. Tan and J. C. Feng: Sci. Tech. Weld. Join., 2009, vol. 14, pp. 274–281.10.1179/136217109X406929 ↗
25. P. Xue, B.L. Xiao, Q. Zhang and Z.Y. Ma: Scr. Mater., 2011, vol. 64, pp. 1051–54.10.1016/j.scriptamat.2011.02.019 ↗
26. S.R. Ren, Z.Y. Ma and L.Q. Chen: Scr. Mater., 2007, vol. 56, pp. 69–72.10.1016/j.scriptamat.2006.08.054 ↗
27. M. Gao, Y. Cao, X.Y. Zeng and T. Lin: Sci. Tech. Weld. Join., 2010, vol. 15, pp. 638–45.10.1179/136217110X12813393169697 ↗