Electrodeposition of Ni-W/PTFE Nanocomposite Coating and Investigation of Its Corrosion Resistance and Microhardness
Source abstract
Abstract
The current work mainly aims at estimating the impact of reinforcement nanoparticles (NPs) of polytetrafluoroethylene (PTFE) on the electrochemical and mechanical characteristics of Ni-W-PTFE nanocomposite (NC) coatings. Ni-W-PTFE NC coating was electrodeposited on copper from a modified bath having PTFE particles by direct current (DC). The impact of PTFE NPs on characteristics of Ni-W coatings was studied. Energy-dispersive X-ray detector (EDS) coupled with SEM, scanning electron microscope (SEM), and XRD are employed to investigate the chemical composition, surface morphology, and grain size of Ni-W-PTFE NC coatings, respectively. The electrochemical behavior of deposits was analyzed by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (Tafel) techniques. It was found that the addition of PTFE particles enhanced the hardness and surface morphology of the composite coatings and changed to a more spherical granular shape. XRD results showed that the Ni-W/PTFE NC coating has a Face-Centered Cubic (FCC) structure and that the particle`s crystallite size range is 25 to 38 nm. In addition, corrosion tests displayed that at the first step, corrosion resistance of deposits was increased by increasing bath concentrations of PTFE (to 8 g L−1). These superior properties are achieved chiefly due to uniformly distributed reinforced particles in deposits. The highest corrosion resistance (13293 Ω cm2) was attained from the solution with 8 g L−1 PTFE.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A. Aliyu, A. Gupta, and C. Srivastava: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 1440–49.10.1007/s11661-022-06605-5 ↗
2. A.P. Meshram, A. Gupta, and C. Srivastava: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 1430–39.10.1007/s11661-022-06603-7 ↗
3. P. Das, B. Samantaray, S. Dolai, K.S. Seshu, A. Prakash, and S. Gollapudi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 1913–26.10.1007/s11661-021-06202-y ↗
4. M.G. Hosseini, M. Abdolmaleki, and J. Ghahremani: Corros. Eng. Sci. Technol., 2013, vol. 49, pp. 247–53.10.1179/1743278213Y.0000000120 ↗
5. M.K. Kolle, S. Shajahan, and A. Basu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3721–31.10.1007/s11661-020-05787-0 ↗
6. S. Singh, M. Sribalaji, N.P. Wasekar, S. Joshi, G. Sundararajan, R. Singh, and A.K. Keshri: Appl. Surf. Sci., 2016, vol. 364, pp. 264–72.10.1016/j.apsusc.2015.12.179 ↗
7. K.A. Kumar, G.P. Kalaignan, and V.S. Muralidharan: Appl. Surf. Sci., 2012, vol. 259, pp. 231–37.10.1016/j.apsusc.2012.07.024 ↗
8. G. Gyawali, B. Joshi, K. Tripathi, and S.W. Lee: Ceram. Int., 2016, vol. 42, pp. 3497–3503.10.1016/j.ceramint.2015.10.153 ↗
9. N.P. Wasekar, N. Hebalkar, A. Jyothirmayi, B. Lavakumar, M. Ramakrishna, and G. Sundararajan: Corros. Sci., 2020, vol. 165, pp. 108409–12.10.1016/j.corsci.2019.108409 ↗
10. N. Sunwang, P. Wangyao, and Y. Boonyongmaneerat: Surf. Coat. Technol., 2011, vol. 206, pp. 1096–1101.10.1016/j.surfcoat.2011.07.082 ↗
11. L. Elias and A.C. Hegde: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1033–39.10.1007/s11665-018-3134-z ↗
12. B. Li, D. Li, J. Zhang, W. Chen, and W. Zhang: J. Alloys Compd., 2019, vol. 787, pp. 952–62.10.1016/j.jallcom.2019.02.168 ↗
13. B. Li, D. Li, J. Zhang, W. Chen, and W. Zhang: Mater. Res. Bull., 2019, vol. 114, pp. 138–47.10.1016/j.materresbull.2019.03.004 ↗
14. T. He, Y. He, H. Li, Z. Su, Y. Fan, and Z. He: Ceram. Int., 2018, vol. 44, pp. 9188–93.10.1016/j.ceramint.2018.02.128 ↗
15. B. Li, D. Li, W. Chen, Y. Liu, J. Zhang, Y. Wei, W. Zhang, and W. Jia: Ceram. Int., 2019, vol. 45, pp. 4870–79.10.1016/j.ceramint.2018.11.184 ↗
16. S. Ahmadiyeh, A. Rasooli, and M.G. Hosseini: Surf. Eng., 2018, vol. 35, pp. 861–72.10.1080/02670844.2018.1498823 ↗
17. S. Ahmadiyeh, A. Rasooli, M.G. Hosseini, and A.H.S. Farhood: Mater. Chem. Phys., 2021, vol. 270, pp. 124761–75.10.1016/j.matchemphys.2021.124761 ↗
18. M.G. Hosseini, S. Ahmadiyeh, and A. Rasooli: Mater. Sci. Technol., 2019, vol. 35, pp. 1248–56.10.1080/02670836.2019.1619292 ↗
19. S. Ahmadiyeh, A. Rasooli, and M.G. Hosseini: Adv. Eng. Mater., 2020, vol. 22, pp. 2000426–37.10.1002/adem.202000426 ↗
20. S.I. Ghazanlou, A.H.S. Farhood, S. Hosouli, S. Ahmadiyeh, and A. Rasooli: Mater. Manuf. Process., 2018, vol. 33, pp. 1067–79.10.1080/10426914.2017.1364748 ↗
21. S.I. Ghazanlou, S. Ahmadiyeh, and X.X. Yavari: Surf. Eng., 2017, vol. 33, pp. 337–47.10.1080/02670844.2016.1275484 ↗
22. V. Adimule, B.C. Yallur, D. Bhowmik, and A.H.J. Gowda: Trans. Electr. Electron. Mater., 2022, vol. 23, pp. 288–303.10.1007/s42341-021-00348-7 ↗
23. V. Adimule, D. Bhowmik, and A. Suryavanshi: IOP Conf. Ser., 2019, vol. 577, 012032.10.1088/1757-899X/577/1/012032 ↗
24. V. Adimule, P. Banakar, K.S. Adarash, and V.H. Naik: AIP Conf. Proc., 2018, vol. 1989, 020001.10.1063/1.5047677 ↗
25. V. Adimule, P. Vageesha, G. Bagihalli, D. Bowmik, and H.J. Adarsha: Emerging Research in Electronics, Computer Science and Technology, 1st ed. Springer, Singapore, PRC, 2019, pp. 1131–40.10.1007/978-981-13-5802-9_97 ↗
26. V. Adimule, S.S. Nandi, and H.J. Adarsha: J. Nano Res., 2021, vol. 67, pp. 33–42.10.4028/www.scientific.net/JNanoR.67.33 ↗
27. V. Adimule, S.S. Nandi and A.H.J. Gowda. Techno-Societal, 1nd ed., Springer, London, 2021, pp. 55-68.10.1007/978-3-030-69925-3_6 ↗
28. V. Adimule, S.S. Nandi, B.C. Yallur, D. Bhowmik, and A.H. Jagadeesha: Mater. Today Chem., 2021, vol. 20, pp. 100438–51.10.1016/j.mtchem.2021.100438 ↗
29. V. Adimule, S.S. Nandi, B.C. Yallur, D. Bhowmik, and A.H. Jagadeesha: J. Fluoresc., 2021, vol. 31, pp. 487–99.10.1007/s10895-021-02683-7 ↗
30. V. Adimule, B.C. Yallur, D. Bhowmik, and A.H.J. Gowda: J. Mater. Sci., 2021, vol. 32, pp. 12164–81.
31. V. Adimule, B.C. Yallur, M. Challa, and R.S. Joshi: Heliyon, 2021, vol. 7, e08541.10.1016/j.heliyon.2021.e08541 ↗
32. S.S. Tulsi: Trans. Inst. Met. Finish., 1983, vol. 61, pp. 147–49.10.1080/00202967.1983.11870654 ↗
33. S. Khameneh-asl, A. Farzaneh, H. Teymourinia, O. Mermer, and M.G. Hosseini: RSC Adv., 2016, vol. 6, pp. 78774–83.10.1039/C6RA12970F ↗
34. L. Ren, Y. Cheng, Q. Wang, and J. Yang: Surf. Topogr. Metrol. Prop., 2019, vol. 7, pp. 045009–5021.10.1088/2051-672X/ab47a1 ↗
35. J. Tam, Z. Jiao, J.C.F. Lau, and U. Erb: Wear, 2017, vol. 374, pp. 1–4.10.1016/j.wear.2016.12.023 ↗
36. Y. Li: Int. J. Electrochem. Sci., 2022, vol. 17, p. 2.
37. S. Sangeetha, G.P. Kalaignan, and J.T. Anthuvan: Appl. Surf. Sci., 2015, vol. 359, pp. 412–19.10.1016/j.apsusc.2015.10.127 ↗
38. A. Farzaneh, M.G. Hosseini, S.K. Asl, and O. Mermer: Int. J. Electrochem. Sci., 2016, vol. 11, pp. 5140–53.10.20964/2016.06.86 ↗
39. Z. Mohammadpour and H.R. Zare: Met. Mater. Int., 2018, vol. 24, pp. 761–72.10.1007/s12540-018-0060-4 ↗
40. S.I. Ghazanlou, A.H.S. Farhood, S. Hosouli, S. Ahmadiyeh, and A. Rasooli: J. Mater. Sci. Mater. Electron., 2017, vol. 28, pp. 15537–51.10.1007/s10854-017-7442-0 ↗
41. S.I. Ghazanlou, A. Farhood, S. Ahmadiyeh, E. Ziyaei, A. Rasooli, and S. Hosseinpour: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1922–35.10.1007/s11661-019-05118-y ↗
42. N. Guglielmi: J. Electrochem. Soc., 1972, vol. 119, pp. 1009–12.10.1149/1.2404383 ↗
43. S. Ahmadiyeh, A. Rasooli, and M.G. Hosseini: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3167–79.10.1007/s11661-020-05718-z ↗
44. M.G. Hosseini, S. Ahmadiyeh, A. Rasooli, and S. Khameneh-asl: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5510–24.10.1007/s11661-019-05444-1 ↗
45. M.Y. Rekha and C. Srivastava: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5896–913.10.1007/s11661-019-05474-9 ↗
46. I. Garcia, J. Fransaer, and J.-P. Celis: Surf. Coat. Technol., 2001, vol. 148, pp. 171–78.10.1016/S0257-8972(01)01336-6 ↗
47. F. Hu and K. Chan: Appl. Surf. Sci., 2005, vol. 243, pp. 251–58.10.1016/j.apsusc.2004.09.068 ↗
48. N. Yadav, M. Nagar, and R. Bohra: J. Sol-Gel Sci. Technol., 2010, vol. 54, pp. 119–28.10.1007/s10971-010-2166-0 ↗
49. J.R. Macdonald: Ann. Biomed. Eng., 1992, vol. 20, pp. 289–305.10.1007/BF02368532 ↗
50. A. Rasooli, M.S. Safavi, S. Ahmadiyeh, and A. Jalali: Prot. Met. Phys. Chem. Surf., 2020, vol. 56, pp. 320–27.10.1134/S2070205120020215 ↗
51. Q. Feng, T. Li, H. Teng, X. Zhang, Y. Zhang, C. Liu, and J. Jin: Surf. Coat. Technol., 2008, vol. 202, pp. 4137–44.10.1016/j.surfcoat.2008.03.001 ↗
52. Y. Wang, S.L. Tay, S. Wei, C. Xiong, W. Gao, R.A. Shakoor, and R. Kahraman: J. Alloys Compd., 2015, vol. 649, pp. 222–28.10.1016/j.jallcom.2015.07.147 ↗
53. B. Bakhit: Surf. Coat. Technol., 2015, vol. 275, pp. 324–31.10.1016/j.surfcoat.2015.04.046 ↗
54. M. Abdolmaleki, R. Golbedaghi, and S. Ahmadieh: J. Appl. Chem., 2021, vol. 16, pp. 51–62.
55. M.G. Hosseini and H. Teimuriniya, 11th Iranian Biennial Electrochemistry Seminar, 2014: Rasht. pp. 201.
56. M. Stern and A.L. Geary: J. Electrochem. Soc., 1957, vol. 104, pp. 56–64.10.1149/1.2428496 ↗
57. S. Özkan, G. Hapçı, G. Orhan, and K. Kazmanlı: Surf. Coat. Technol., 2013, vol. 232, pp. 734–41.10.1016/j.surfcoat.2013.06.089 ↗