journal article·2022-07

High-Entropy-Alloy CoFeNiCr Bonded WC-Based Cemented Carbide Prepared by Spark Plasma Sintering

Donghai Zheng

Publisher page

Abstract

A WC-based cermet bonded by high-entropy-alloy CoFeNiCr was successfully fabricated by spark plasma sintering. The densification behavior, phase constitution, microstructure and mechanical properties of WC-CoFeNiCr/Co composites were investigated. After 5 minutes sintering at 1200 °C, the high-entropy-alloy CoFeNiCr binder retains an fcc structure without reacting with WC, and the WC-CoFeNiCr specimens show dense microstructure. At room temperature, the WC-10 wt pct CoFeNiCr specimen possesses hardness and fracture toughness of HV30 18.95 GPa and 15.88 MPa·m1/2, which are 11.6 and 7.6 pct higher than those of the WC-10 wt pct Co specimen. Especially at 600 °C, the WC-CoFeNiCr specimen has superior hardness, which is 29 pct higher than that of the WC-Co. The high softening resistance of the WC-CoFeNiCr composite at elevated temperature should be mainly attributable to the diffusion retardation of the CoCrFeNi binder.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. R. Warren and M.B. Waldron: Powder Metall., 1972, vol. 15, pp. 166–80.10.1179/pom.1972.15.30.005 ↗
2. A.J. Ardell: Acta Mater., 1972, vol. 20, pp. 601–09.10.1016/0001-6160(72)90015-6 ↗
3. I. Konyashin, A.A. Zaitsev, D. Sidorenko, E.A. Levashov, B. Ries, S.N. Konischev, M. Sorokin, A.A. Mazilkin, M. Herrmann, and A. Kaiser: Int. J. Refract. Met. Hard Mater., 2017, vol. 62, pp. 134–48.10.1016/j.ijrmhm.2016.06.006 ↗
4. S. Imasato, K. Tokumoto, T. Kitada, and S. Sakaguchi: Int. J. Refract. Met. Hard Mater., 1995, vol. 13, pp. 305–12.10.1016/0263-4368(95)92676-B ↗
5. J. Long, Z. Zhang, T. Xu, and B. Lu: Int. J. Refract. Met. Hard Mater., 2013, vol. 40, pp. 2–7.10.1016/j.ijrmhm.2013.03.014 ↗
6. H.Y. Rong, Z.J. Peng, X.Y. Ren, Y. Peng, C.B. Wang, Z.Q. Fu, L.H. Qi, and H.H. Miao: Mater. Sci. Eng. A, 2012, vol. 532, pp. 543–47.10.1016/j.msea.2011.10.119 ↗
7. B.L. Ezquerra, L. Lozada, H. van den Berg, M. Wolf, and J.M. Sanchez: Int. J. Refract. Met. Hard Mater., 2018, vol. 72, pp. 89–96.10.1016/j.ijrmhm.2017.12.021 ↗
8. Y. Gao, B.H. Luo, K.J. He, H.B. Jing, Z.H. Bai, W. Chen, and W.W. Zhang: Vacuum, 2017, vol. 143, pp. 271–82.10.1016/j.vacuum.2017.06.028 ↗
9. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, and S.-Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
10. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
11. T. Yang, Y.L. Zhao, Y. Tong, Z.B. Jiao, J. Wei, J.X. Cai, X.D. Han, D. Chen, A. Hu, J.J. Kai, K. Lu, Y. Liu, and C.T. Liu: Science, 2018, vol. 362, pp. 933–37.10.1126/science.aas8815 ↗
12. S. Praveen, B.S. Murty, and R.S. Kottada: Mater. Sci. Eng. A, 2012, vol. 534, pp. 83–89.10.1016/j.msea.2011.11.044 ↗
13. L. Liu, J.B. Zhu, C. Zhang, J.C. Li, and Q. Jiang: Mater. Sci. Eng. A, 2012, vol. 548, pp. 64–68.10.1016/j.msea.2012.03.080 ↗
14. W.-R. Wang, W.-L. Wang, and J.-W. Yeh: J. Alloys Comp., 2014, vol. 589, pp. 143–52.10.1016/j.jallcom.2013.11.084 ↗
15. C.-C. Juan, M.-H. Tsai, C.-W. Tsai, C.-M. Lin, W.-R. Wang, C.-C. Yang, S.-K. Chen, S.-J. Lin, and J.-W. Yeh: Intermetallics, 2015, vol. 62, pp. 76–83.10.1016/j.intermet.2015.03.013 ↗
16. O.N. Senkov, G.B. Wilks, J.M. Scott, and D.B. Miracle: Intermetallics, 2011, vol. 19, pp. 698–706.10.1016/j.intermet.2011.01.004 ↗
17. O.N. Senkov, J.M. Scott, S.V. Senkova, F. Meisenkothen, D.B. Miracle, and C.F. Woodward: J. Mater. Sci., 2012, vol. 47, pp. 4062–74.10.1007/s10853-012-6260-2 ↗
18. G. Zhu, Y. Liu, and J.W. Ye: Mater. Lett., 2013, vol. 113, pp. 80–82.10.1016/j.matlet.2013.08.087 ↗
19. Z. Fu and R. Koc: J. Am. Ceram. Soc., 2017, vol. 100, pp. 2803–13.10.1111/jace.14814 ↗
20. C.S. Chen, C.C. Yang, H.Y. Chai, J.W. Yeh, and J.L.H. Chau: Int. J. Refract. Met. Hard Mater., 2014, vol. 43, pp. 200–04.10.1016/j.ijrmhm.2013.11.005 ↗
21. Z. Fu, W. Chen, H. Wen, D. Zhang, Z. Chen, B. Zheng, Y. Zhou, and E.J. Lavernia: Acta Mater., 2016, vol. 107, pp. 59–71.10.1016/j.actamat.2016.01.050 ↗
22. D.H. Zheng, X.Q. Li, Y.Y. Li, S.G. Qu, and C. Yang: J. Alloys Comp., 2013, vol. 572, pp. 62–67.10.1016/j.jallcom.2013.03.259 ↗
23. K. Niihara, R. Morena, and D.P.H. Hasselman: J. Mater. Sci. Lett., 1982, vol. 1, pp. 13–16.10.1007/BF00724706 ↗
24. B. Liu, J. Wang, Y. Liu, Q. Fang, Y. Wu, S. Chen, and C.T. Liu: Intermetallics, 2016, vol. 75, pp. 25–30.10.1016/j.intermet.2016.05.006 ↗
25. Y.-F. Kao, T.-J. Chen, S.-K. Chen, and J.-W. Yeh: J. Alloys Comp., 2009, vol. 488, pp. 57–64.10.1016/j.jallcom.2009.08.090 ↗
26. W.H. Liu, J.Y. He, H.L. Huang, H. Wang, Z.P. Lu, and C.T. Liu: Intermetallics, 2015, vol. 60, pp. 1–8.10.1016/j.intermet.2015.01.004 ↗
27. Y. Park, N. Hwang, and D. Yoon: MMTA, 1996, vol. 27, pp. 2809–19.10.1007/BF02652373 ↗
28. D.Y. Yang, D.Y. Yoon, and S.J.L. Kang: J. Am. Ceram. Soc., 2011, vol. 94, pp. 1019–24.10.1111/j.1551-2916.2010.04198.x ↗
29. D.H. Zheng, X.Q. Li, Y.Y. Li, S.G. Qu, and C. Yang: Mater. Sci. Eng. A, 2013, vol. 561, pp. 445–51.10.1016/j.msea.2012.10.059 ↗
30. J. Ferreira, M. Amaral, F. Antunes, and J. Costa: Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 1–8.10.1016/j.ijrmhm.2008.01.013 ↗
31. J. Dąbrowa, W. Kucza, G. Cieślak, T. Kulik, M. Danielewski, and J.-W. Yeh: J. Alloys Comp., 2016, vol. 674, pp. 455–62.10.1016/j.jallcom.2016.03.046 ↗
32. C. Tsai, M. Tsai, and J.-W. Yeh: Acta Mater., 2013, vol. 61, pp. 4887–97.10.1016/j.actamat.2013.04.058 ↗
33. A. Mehta and Y. Sohn: Mater. Res. Lett., 2021, vol. 9, pp. 239–46.10.1080/21663831.2021.1878475 ↗
34. J. Dąbrowa, M. Zajusz, W. Kucza, G. Cieślak, K. Berent, T. Czeppe, T. Kulik, and M. Danielewski: J. Alloys Comp., 2019, vol. 783, pp. 193–207.10.1016/j.jallcom.2018.12.300 ↗
35. M. Vaidya, S. Trubel, B.S. Murty, G. Wilde, and S.V. Divinski: J. Alloys Comp., 2016, vol. 688, pp. 994–1001.10.1016/j.jallcom.2016.07.239 ↗
36. M. Vaidya, K.G. Pradeep, B.S. Murty, G. Wilde, and S.V. Divinski: Acta Mater., 2018, vol. 146, pp. 211–24.10.1016/j.actamat.2017.12.052 ↗
37. M. Vaidya, K.G. Pradeep, B.S. Murty, G. Wilde, and S.V. Divinski: Sci. Rep., 2017, vol. 7, p. 12293.10.1038/s41598-017-12551-9 ↗
38. S.V. Divinski, A.V. Pokoev, E. Neelamegan, and P.J.D.F. Aloke: Diffus. Found., 2018, vol. 17, pp. 69–104.10.4028/www.scientific.net/DF.17.69 ↗
39. D. Prokoshkina, V.A. Esin, G. Wilde, and S.V. Divinski: Acta Mater., 2013, vol. 61, pp. 5188–97.10.1016/j.actamat.2013.05.010 ↗
40. S. Frank and C. Herzig: Mater. Sci. Eng. A, 1997, vol. 239–240, pp. 882–88.10.1016/S0921-5093(97)00679-5 ↗
41. S.V. Divinski, G. Reglitz, and G. Wilde: Acta Mater., 2010, vol. 58, pp. 386–95.10.1016/j.actamat.2009.09.015 ↗
42. J.H. Westbeook: J. Electrochem. Soc., 1956, vol. 103, p. 54.10.1149/1.2430233 ↗
43. G. Sharma, R.V. Ramanujan, T.R.G. Kutty, and G.P. Tiwari: Mater. Sci. Eng. A, 2000, vol. 278, pp. 106–12.10.1016/S0921-5093(99)00590-0 ↗
44. K.B. Khan, T.R.G. Kutty, and M.K. Surappa: Mater. Sci. Eng. A, 2006, vol. 427, pp. 76–82.10.1016/j.msea.2006.04.015 ↗