Role of Nb Addition on Microstructural Stability and Deformation Behaviors of FeMnAlC Lightweight Steels at 400 °C
Source abstract
Abstract
As part of efforts to fabricate FeMnAlC lightweight steels suitable for high-temperature applications, the influence of Nb addition on the microstructure and tensile deformation behaviors has been investigated. Electron backscattered diffraction analysis showed that Fe–20Mn–8Al–1.0C base steel consisted of a full austenite matrix after solution treatment, and the addition of 0.1 wt pct Nb resulted in grain refinement from 56 to 23 μm without significant changes in the microstructure. After aging treatment at 550 °C for 1 hour, significant hardening occurred (base steel: 257 → 392 HV, Nb-added steel: 273 → 359 HV) by the precipitation of nanosized κ-carbides with sizes of 2 to 6 nm. A higher strain-hardening rate at 400 °C by Nb addition was clearly brought about by the mutual interaction of dislocations with κ-carbides (through both shearing and Orowan bypassing mechanisms). The nanoindentation results and the calculation of the strength increment indicated that Nb addition led to a smaller hardening by κ-carbide precipitation. In terms of the microstructural evolution by thermal exposure time (100 to 5000 hours at 400 °C), it was first found that the intensive slip band impingement at grain boundaries occurred in these lightweight steels, but Nb addition effectively inhibited the significant reduction in ductility by suppressing the formation of slip bands. The effect of Nb addition is discussed in terms of the collaborative effects of grain refinement, κ-carbide precipitation, and microstructural stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. S.H. Kim, H. Kim, and N.J. Kim: Nature, 2015, vol. 518, pp. 77–80. https://doi.org/10.1038/nature14144.10.1038/nature14144 ↗
2. F.J. Gil, J.M. Manero, M.P. Ginebra, and J.A. Planell: Mater. Sci. Eng. A, 2003, vol. 349, pp. 150–5. https://doi.org/10.1016/S0921-5093(02)00784-0.10.1016/S0921-5093(02)00784-0 ↗
3. S. Tähtinen, P. Moilanen, B.N. Singh, and D.J. Edwards: J. Nucl. Mater., 2002, vols. 307–311, pp. 416–20. https://doi.org/10.1016/S0022-3115(02)01010-3.10.1016/S0022-3115(02)01010-3 ↗
4. P. Marmy and T. Leguey: J. Nucl. Mater., 2001, vol. 296, pp. 155–64. https://doi.org/10.1016/S0022-3115(01)00564-5.10.1016/S0022-3115(01)00564-5 ↗
5. A.W. Bowen: Mater. Sci. Eng., 1979, vol. 40, pp. 31–47. https://doi.org/10.1016/0025-5416(79)90006-5.10.1016/0025-5416(79)90006-5 ↗
6. T. Dursun and C. Soutis: Mater. Des., 2014, vol. 56, pp. 862–71. https://doi.org/10.1016/j.matdes.2013.12.002.10.1016/j.matdes.2013.12.002 ↗
7. L. Bartlett, R.A. Howell, A. Schulte, D. VanAken, and K. Peaslee: A Review of the Physical and Mechanical Properties of a Cast High Strength and Lightweight Fe-Mn-Al-C Steel, Materials Science and Technology (MS&T) 2010, Houston, Texas, 2010, pp. 1941–53.
8. Y. Sutou, N. Kamiya, R. Umino, I. Ohnuma, and K. Ishida: ISIJ Int., 2010, vol. 50, pp. 893–9. https://doi.org/10.2355/isijinternational.50.893.10.2355/isijinternational.50.893 ↗
9. D. Raabe, H. Springer, I. Gutierrez-Urrutia, F. Roters, M. Bausch, J.B. Seol, M. Koyama, P.P. Choi, and K. Tsuzaki: JOM, 2014, vol. 66, pp. 1845–56. https://doi.org/10.1007/s11837-014-1032-x.10.1007/s11837-014-1032-x ↗
10. C.W. Kim, M. Terner, J.H. Lee, H.U. Hong, J. Moon, S.J. Park, J.H. Jang, C.H. Lee, B.H. Lee, and Y.J. Lee: J. Alloys Compd., 2019, vol. 775, pp. 554–64. https://doi.org/10.1016/j.jallcom.2018.10.104.10.1016/j.jallcom.2018.10.104 ↗
11. G. Frommeyer and U. Brux: Steel Res. Int., 2006, vol. 77, pp. 627–33. https://doi.org/10.1002/srin.200606440.10.1002/srin.200606440 ↗
12. N. Lutsey: Review of Technical Literature and Trends Related to Automobile Mass-Reduction Technology, Davis, CA: University of California, Davis, UCD-ITS-RR-10-10, 2010. https://escholarship.org/uc/item/9t04t94w.
13. H. Kim, D.-W. Suh, and N.-J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1–11. https://doi.org/10.1088/1468-6996/14/1/014205.10.1088/1468-6996/14/1/014205 ↗
14. A. Grajcar, M. Kaminska, U. Galisz, L. Bulkowski, M. Opiela, and P. Skrzypczyk: J. Achiev. Mater. Manuf. Eng., 2012, vol. 55, pp. 245–55.
15. Ö.N. Cora and M. Koç: Proceedings of 7th Automotive Technologies Congress, 2014, pp. 1–8. https://doi.org/10.13140/2.1.4725.0883.10.13140/2.1.4725.0883 ↗
16. A.B. Pereira, R.O. Santos, B.S. Carvalho, M.C. Butuc, G. Vincze, and L.P. Moreira: Metals, 2019, vol. 9, p. 1051. https://doi.org/10.3390/met9101051.10.3390/met9101051 ↗
17. B. Mintz, A. Tuling, and A. Delgado: Mater. Sci. Technol., 2003, vol. 19, pp. 1721–6. https://doi.org/10.1179/174328413X13789824293948.10.1179/174328413X13789824293948 ↗
18. S.E. Kang, A. Tuling, J.R. Banerjee, W.D. Gundawardana, and B. Mintz: Mater. Sci. Technol., 2014, vol. 27, pp. 95–100. https://doi.org/10.1179/026708309X12506933873387.10.1179/026708309X12506933873387 ↗
19. D.P. Ilyaschenko, D.A. Chinakhov, E.D. Chinakhova, K.Y. Kirichenko, and E.V. Verkhoturova: FME Trans., 2019, vol. 48, pp. 75–81. Doi:10.5937/fmet2001075I.10.5937/fmet2001075I ↗
20. S.C. Tjong: Mater. Charact., 1990, vol. 24, pp. 275–92. https://doi.org/10.1016/1044-5803(90)90055-O.10.1016/1044-5803(90)90055-O ↗
21. K. Sato, K. Tagawa, and Y. Inoue: Mater. Sci. Eng. A, 1989, vol. 111, pp. 45–50. https://doi.org/10.1016/0921-5093(89)90196-2.10.1016/0921-5093(89)90196-2 ↗
22. K. Sato, K. Tagawa, and Y. Inoue: Metall. Trans. A, 1990, vol. 21, pp. 5–11. https://doi.org/10.1007/BF02656419.10.1007/BF02656419 ↗
23. W.K. Choo, J.H. Kim, and J.C. Yoon: Acta Mater., 1997, vol. 45, pp. 4877–85. https://doi.org/10.1016/S1359-6454(97)00201-2.10.1016/S1359-6454(97)00201-2 ↗
24. P. Dey, R. Nazarov, B. Dutta, M. Yao, M. Herbig, M. Friák, T. Hickel, D. Rabbe, and J. Neugebauer: Physical Review B, 2017, vol. 95, pp. 104–8. https://doi.org/10.1103/PhysRevB.95.104108.10.1103/PhysRevB.95.104108 ↗
25. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107. https://doi.org/10.1007/BF02646146.10.1007/BF02646146 ↗
26. B.K. Zuidema, D.K. Subramanyam, and W.C. Leslie: Metall. Trans. A, 1987, vol. 18, pp. 1629–93. https://doi.org/10.1007/BF02646146.10.1007/BF02646146 ↗
27. F.C. Chen and C.P. Chou: Mater. Sci. Eng. A, 1993, vol. 160, pp. 261–70. https://doi.org/10.1016/0921-5093(93)90455-N.10.1016/0921-5093(93)90455-N ↗
28. J.D. Yoo and K.-T. Park: Mater. Sci. Eng. A, 2008, vol. 496, pp. 417–24. https://doi.org/10.1016/j.msea.2008.05.042.10.1016/j.msea.2008.05.042 ↗
29. K.-T. Park: Scripta Mater., 2013, vol. 68, pp. 375–9. https://doi.org/10.1016/j.scriptamat.2012.09.031.10.1016/j.scriptamat.2012.09.031 ↗
30. K.-T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K.Y. Choi, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3651–61. https://doi.org/10.1016/j.msea.2010.02.058.10.1016/j.msea.2010.02.058 ↗
31. K. Choi, C.-H. Seo, H. Lee, S.K. Kim, J.H. Kwak, K.G. Chin, K.-T. Park, and N.J. Kim: Scripta Mater., 2010, vol. 63, pp. 1028–31. https://doi.org/10.1016/j.scriptamat.2010.07.036.10.1016/j.scriptamat.2010.07.036 ↗
32. J.-H. Shin, J.H. Jang, S.-D. Kim, S.-J. Park, and J. Lee: Phil. Mag. Lett., 2020, vol. 100, pp. 1–10. https://doi.org/10.1080/09500839.2020.1768603.10.1080/09500839.2020.1768603 ↗
33. J.-H. Shin, G.-Y. Rim, S.-D. Kim, J.H. Jang, S.-J. Park, and J. Lee: Mater. Charact., 2020, vol. 164, p. 110316. https://doi.org/10.1016/j.matchar.2020.110316.10.1016/j.matchar.2020.110316 ↗
34. J. Moon, S.-J. Park, S.-D. Kim, J.H. Jang, T.-H. Lee, C.-H. Lee, B.H. Lee, H.-U. Hong, and H.N. Han: J. Alloys Compd., 2019, vol. 804, pp. 511–20. https://doi.org/10.1016/j.jallcom.2019.06.362.10.1016/j.jallcom.2019.06.362 ↗
35. J. Moon, S.-J. Park, and C.-H. Lee: J. Weld. Join., 2020, vol. 38, pp. 333–41. https://doi.org/10.5781/JWJ.2020.38.4.1.10.5781/JWJ.2020.38.4.1 ↗
36. N. Fujita, K. Ohmura, M. Kikuchi, T. Suzuki, S. Funaki, and I. Hiroshige: Scripta Mater., 1996, vol. 35, pp. 705–10. https://doi.org/10.1016/1359-6462(96)00214-X.10.1016/1359-6462(96)00214-X ↗
37. Y. Yamamoto, M.L. Santella, M.P. Brady, H. Bei, and P.J. Maziasz: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1868–80. https://doi.org/10.1007/s11661-009-9886-1.10.1007/s11661-009-9886-1 ↗
38. S.-Y. Huang, W.-T. Tsai, Y.-T. Pan, J.-C. Kuo, H.-W. Chen, and D.-Y. Lin: Metals, 2019, vol. 9, p. 975. https://doi.org/10.3390/met9090975.10.3390/met9090975 ↗
39. J. Moon and S.-J. Park: J. Weld. Join., 2017, vol. 35, pp. 9–15. https://doi.org/10.5781/JWJ.2017.35.1.9.10.5781/JWJ.2017.35.1.9 ↗
40. A. Bedolla-Jacuinde, R. Correa, J.G. Quezada, and C. Maldonado: Mater. Sci. Eng. A, 2005, vol. 398, pp. 297–308. https://doi.org/10.1016/j.msea.2005.03.072.10.1016/j.msea.2005.03.072 ↗
41. G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, and W.F. Hammetter: Metall. Mater. Trans. A, 1989, vol. 20, pp. 2149–58. https://doi.org/10.1007/BF02650300.10.1007/BF02650300 ↗
42. C.L. Yang, Z.J. Zhang, T. Cai, P. Zhang, and Z.F. Zhang: Sci. Rep., 2015, vol. 5, p. 15532. https://doi.org/10.1038/srep15532.10.1038/srep15532 ↗
43. S.-D. Kim, J.-Y. Park, J.H. Jang, J. Moon, H.-Y. Ha, C.-H. Lee, K.-J. Park, J.-H. Shin, and T.-H. Lee: Sci. Rep., 2019, vol. 9, p. 15171. https://doi.org/10.1038/s41598-019-51586-y.10.1038/s41598-019-51586-y ↗
44. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83. https://doi.org/10.1016/0001-6160(89)90143-0.10.1016/0001-6160(89)90143-0 ↗
45. E. Welsch, D. Ponge, S.M. HafezHaghighat, S. Sandlöbes, P. Choi, M. Herbig, S. Zaefferer, and D. Raabe: Acta Mater., 2016, vol. 116, pp. 188–99. https://doi.org/10.1016/j.actamat.2016.06.037.10.1016/j.actamat.2016.06.037 ↗
46. P. Verma, G.S. Rao, P. Chellapandi, G.S. Mahobia, K. Chattopadhyay, N.C.S. Srinivas, and V. Singh: Mater. Sci. Eng. A, 2015, vol. 621, pp. 39–51. https://dx.doi.org/10.1016/j.msea.2014.10.011.10.1016/j.msea.2014.10.011 ↗
47. W. Karlsen, M. Ivanchenko, U. Ehrnstén, Y. Yagodzinskyy, and H. Hänninen: J. Nucl. Mater., 2009, vol. 395, pp. 156–61. https://doi.org/10.1016/j.jnucmat.2009.10.047.10.1016/j.jnucmat.2009.10.047 ↗
48. J. Moon, S.-J. Park, J.H. Jang, T.-H. Lee, C.-H. Lee, H.-U. Hong, H.N. Han, J. Lee, B.H. Lee, and C. Lee: Acta Mater., 2018, vol. 147, pp. 226–35. https://doi.org/10.1016/j.actamat.2018.01.051.10.1016/j.actamat.2018.01.051 ↗
49. J. Moon, H.-Y. Ha, S.-J. Park, T.-H. Lee, J.H. Jang, C.-H. Lee, H.N. Han, and H.-U. Hong: J. Alloys Compd., 2019, vol. 775, pp. 1136–46. https://doi.org/10.1016/j.jallcom.2018.10.253.10.1016/j.jallcom.2018.10.253 ↗
50. H. Wen, T.D. Topping, D.Isheim, D.N. Seidman, and E.J. Lavernia: Acta Mater., 2013, vol. 61, pp. 2769–82. http://dx.doi.org/10.1016/j.actamat.2012.09.036.10.1016/j.actamat.2012.09.036 ↗
51. K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J. M. Schoenung: Acta Mater., 2014, vol. 62, pp. 141–55. https://doi.org/10.1016/j.actamat.2013.09.042.10.1016/j.actamat.2013.09.042 ↗
52. T.H. Courtney: Mechanical Behavior of Materials. 2nd ed. Long Grove, Waveland, 2005.
53. C.K. Syn, D.R. Lesuer, and O.D. Sherby: Metall. Mater. Trans. A, 1994, vol. 25, pp. 1481–93. https://doi.org/10.1007/BF02665480.10.1007/BF02665480 ↗
54. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83. https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564 ↗
55. D. Hull and D.J. Bacon: Introduction to Dislocations, 5th ed. Butterworth-Heinemann, 2011. https://doi.org/10.1016/C2009-0-64358-0.10.1016/C2009-0-64358-0 ↗
56. M. Sauzay and M.O. Moussa: Int. J. Fract., 2013, vol. 184, pp. 215–40. https://doi.org/10.1007/s10704-013-9878-4.10.1007/s10704-013-9878-4 ↗
57. J. Kacher, B.P. Eftink, B. Cui, and I.M. Robertson: Current Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 227–43. http://dx.doi.org/10.1016/j.cossms.2014.05.004.10.1016/j.cossms.2014.05.004 ↗
58. J. Kacher and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 6657–72. https://doi.org/10.1016/j.actamat.2012.08.036.10.1016/j.actamat.2012.08.036 ↗
59. J. Moon, H.-Y. Ha, K.-W. Kim, S.-J. Park, T.-H. Lee, S.-D. Kim, J.H. Jang, H.-H. Jo, H.-U. Hong, B.H. Lee, Y.-J. Lee, C. Lee, D.-W. Suh, H.N. Han, D. Raabe, and C.-H. Lee: Sci. Rep., 2020, vol. 10, p. 12140. https://doi.org/10.1038/s41598-020-69177-7.10.1038/s41598-020-69177-7 ↗
60. J. Moon, S.-J. Park, J.H. Jang, T.-H. Lee, C.-H. Lee, H.-U. Hong, H.N. Han, D.-W. Suh, S.H. Kim, H.N. Han, and B.H. Lee: Scripta Mater., 2017, vol. 127, pp. 97–101. http://dx.doi.org/10.1016/j.scriptamat.2016.08.036.10.1016/j.scriptamat.2016.08.036 ↗
61. L. Bartlett, D.V. Aken, J. Medvedeva, D. Isheim, N. Medvedeva, and K. Song: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2421–34. https://doi.org/10.1007/s11661-014-2187-3.10.1007/s11661-014-2187-3 ↗