journal article·2021-09

The Role of Crystallographic Texture and Basal Plane Slip on Microstructurally Short Fatigue Crack Initiation and Propagation in Forged Billet and Rolled Bar Ti-6Al-4V Alloy

Kishan Habib, Hideaki Nishikawa, Yoshiyuki Furuya, Satoshi Emura

Publisher page

Abstract

Tension-compression fatigue tests were conducted on forged (F-950) and rolled (R-950) Ti-6Al-4V alloys. The role of basal texture, produced by forging, was compared with prismatic texture, produced by rolling, on microstructurally short fatigue crack growth initiation and growth resistance. The fatigue life of R-950 alloy proved to be higher than that of F-950 alloy. Major differences in fatigue crack growth rate were detected in the short fatigue crack region at crack lengths of below 100 µm (F-950 alloy showing low resistance). To quantify the effect of texture alone, the opening/closure behaviour of a microstructurally small crack was analysed from the data obtained by combining an automatic in situ observation system with a digital image correlation technique. This analysis showed the crack opening stress of both alloys to be close to identical in the short fatigue crack growth region, nullifying the effect of crack closure. To study the effect of texture, cross-sectional electron backscatter diffraction analysis was performed at crack initiation sites. The results revealed that in F-950 alloy, short fatigue crack growth proceeded along basal planes that had similarly-oriented grains, whereas in R-950 alloy, short fatigue crack growth did not follow prismatic planes: the orientation varied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. G. Lütjering, Materials Science and Engineering (1998), 243(1-2): 32-45.10.1016/S0921-5093(97)00778-8 ↗
2. G. Welsch, R. Boyer, E. Collings, Materials properties handbook: titanium alloys, ASM international, Metals Park 1993.
3. I. Gurrappa, Materials Characterization, (2003), 51(2-3) 131-139.10.1016/j.matchar.2003.10.006 ↗
4. N. Poondla, T.S. Srivatsan, A. Patnaik, M. Petraroli, Journal of Alloys and Compounds, (2009), 486(1-2) 162-167.10.1016/j.jallcom.2009.06.172 ↗
5. R. Ritchie, J. Lankford, Materials Science and Engineering, (1986), 84 11-16.10.1016/0025-5416(86)90217-X ↗
6. K. Miller, Materials science and technology, (1993), 9(6) 453-462.10.1179/mst.1993.9.6.453 ↗
7. D. McDowell, F. Dunne, International journal of fatigue, (2010), 32(9) 1521-1542.10.1016/j.ijfatigue.2010.01.003 ↗
8. R.O. Ritchie, Metal Science, (1977), 11(8-9) 368-381.10.1179/msc.1977.11.8-9.368 ↗
9. K. Nakajima, K. Terao, T. Miyata, ISIJ international, (1999), 39(1) 69-74.10.2355/isijinternational.39.69 ↗
10. M. Bache, W. Evans, Materials Science and Engineering (2001), 319 409-414.10.1016/S0921-5093(00)02034-7 ↗
11. Furuya Y et al., Catalogue of NIMS fatigue data sheets. Sci Technol Adv Mater. 2019;20: 1055–1072.10.1080/14686996.2019.1680574 ↗
12. Furuya Y et al. (2011) NIMS fatigue data sheet, No: 115. Tsukuba: National Institute for Materials Science
13. Furuya Y et al. (2015) NIMS space use materials strength data sheet, No: 23, National Institute for Materials Science, Tsukuba
14. C. Stubbington, A. Bowen (1973) Titanium science and technology. 45: 1283-1296.
15. K. Zhang, X. Wu, C. Davies, International Journal of Fatigue, (2017), 104 206-220.10.1016/j.ijfatigue.2017.07.022 ↗
16. K. Zhang, K. Yang, A. Huang, X. Wu, C.H.J. Davies, International Journal of Fatigue, (2015) 80 288-297.10.1016/j.ijfatigue.2015.05.020 ↗
17. F. Bridier, P. Villechaise, J. Mendez, Acta Materialia, (2008), 56(15) 3951-3962.10.1016/j.actamat.2008.04.036 ↗
18. Y. Xu, S. Joseph, P. Karamched, K. Fox, D. Rugg, F.P. Dunne, D. Dye, Nature communications, (2020), 11(1) 1-13.10.1038/s41467-019-13993-7 ↗
19. I. Bantounas, D. Dye, T.C. Lindley, Acta materialia, (2010), 58(11) 3908-3918.10.1016/j.actamat.2010.03.036 ↗
20. J. Qiu, Y. Ma, J. Lei, Y. Liu, A. Huang, D. Rugg, R. Yang, Metallurgical and Materials Transactions A, (2014), 45(13) 6075-6087.10.1007/s11661-014-2541-5 ↗
21. A. Maenosono, M. Koyama, Y. Tanaka, S. Ri, Q. Wang, H. Noguchi, International Journal of Fatigue, (2019), 128 105200.10.1016/j.ijfatigue.2019.105200 ↗
22. T.R. Bieler, S. Semiatin, International Journal of Plasticity, (2002), 18(9) 1165-1189.10.1016/S0749-6419(01)00057-2 ↗
23. J.M. Perilla, J.G. Sevillano (1995) Materials Science and Engineering, 201(1-2): 103-110.10.1016/0921-5093(95)09780-5 ↗
24. [24] T. Dick, G. Cailletaud, Computational Materials Science, (2006), 38(1) 113-125.10.1016/j.commatsci.2006.01.015 ↗
25. W. Elber (1971) Damage tolerance in aircraft structures. ASTM International, West Conshohocken
26. R.W. LANDGRAF, Journal of Materials, (1969), 4(1) 176-188.
27. H. Nishikawa, Y. Furuya, Mater Trans (2018) 20:17.
28. H. Nishikawa, Y. Furuya, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, (2019), 105(1) 105-111.10.2355/tetsutohagane.TETSU-2018-096 ↗
29. R. Jones, Titanium Science and Technology (1973)44: 1033-1047.
30. B. Boyce, R. Ritchie, Engineering Fracture Mechanics, (2001), 68(2) 129-147.10.1016/S0013-7944(00)00099-0 ↗
31. J. Newman Jr: Int. J. Fract., 1984, vol. (24), pp. 131–5.10.1007/BF00020751 ↗
32. E. Wolf, Engineering fracture mechanics, (1970), 2(1) 37-45.10.1016/0013-7944(70)90028-7 ↗
33. J. Zhang, S. Yang, J. Lin, Chinese Journal of Mechanical Engineering (2015) 28(2) 409-415.10.3901/CJME.2015.0104.002 ↗
34. S. Dubey, A. Soboyejo, W. Soboyejo, Acta Materialia, (1997), 45(7) 2777-2787.10.1016/S1359-6454(96)00380-1 ↗
35. V. Sinha, C. Mercer, W. Soboyejo, Materials Science and Engineering: (2000), 287(1): 30-42.10.1016/S0921-5093(00)00817-0 ↗
36. J. Andersson, International Journal of Fatigue, (2005), 27(8) 847-852.10.1016/j.ijfatigue.2004.11.007 ↗
37. A. Turnbull, E. De Los-Rios (1995) Fatigue Fract Eng. Mater. Struct. 18(12): 1455-1467.10.1111/j.1460-2695.1995.tb00868.x ↗
38. H. Nishikawa, Y. Furuya, S. Igi, S. Goto, F. Briffod, T. Shiraiwa, M. Enoki, T. Kasuya, Fatigue & Fracture of Engineering Materials & Structures, (2020), 43(6) 1239-1249.10.1111/ffe.13217 ↗
39. Y. Furuya, E. Takeuchi (2014) Materials Science and Engineering, 598: 135-140.10.1016/j.msea.2014.01.019 ↗
40. C. Chung, J. Kim, H. Kim, W. Kim, Materials Science and Engineering: (2002), 337(1-2): 39-44.10.1016/S0921-5093(02)00010-2 ↗
41. B. Oberwinkler, A. Lettner, W. Eichlseder, International Journal of Fatigue (2011), 33(5) 710-718.10.1016/j.ijfatigue.2010.11.024 ↗
42. K. Le Biavant, S. Pommier, C. Prioul, Fatigue & Fracture of Engineering Materials & Structures, (2002), 25(6) 527-545.10.1046/j.1460-2695.2002.00480.x ↗
43. Y. Mine, S. Ando, K. Takashima (2011) Materials Science and Engineering. 528(25-26) 7570-757810.1016/j.msea.2011.06.079 ↗
44. S. Taira, K. Tanaka, M. Hoshina, STP 675 (1979) 135-162.
45. S. Joseph, K. Joseph, T.C. Lindley, D. Dye, International Journal of Plasticity (2020), 131 102743.10.1016/j.ijplas.2020.102743 ↗
46. S. Joseph, T.C. Lindley, D. Dye, International Journal of Plasticity (2018), 110 38-56.10.1016/j.ijplas.2018.06.009 ↗