journal article·2020-05Open access

Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal–Matrix Composite

Witold Węglewski, Pandi Pitchai, Kamil Bochenek, Gabriella Bolzon, Ruth Konetschnik, Bernhard Sartory, Reinhold Ebner, Daniel Kiener, Michał Basista

Abstract

Abstract This work presents a combined experimental and computational study of the deformation and fracture of microcantilever specimens made of chromium(rhenium)-alumina metal–matrix composite (MMC), with a particular focus on the failure properties of the metal–ceramic interfaces. The obtained experimental results show that the bending strength of microcantilevers containing alumina particles in critical cross-sections near specimen’s fixed end is considerably higher than that of unreinforced chromium(rhenium) samples. Brittle cracking along chromium–alumina interfaces is the dominant fracture mode of the composite microcantilevers. The interface characteristics are determined in an indirect way by numerical simulations of the experiment with account of the actual specimen microstructure from the scanning electron microscope (SEM) images. A parametric study demonstrates that the overall material response may be reproduced by different sets of model parameters, whereas the actual failure mode permits to discriminate among the possible alternatives. Using this approach, the in situ values of the chromium–alumina interface cohesive strength and the fracture energy are estimated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Microstructure and mechanical properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Science, 2004, 305, 986-89.10.1126/science.1098993 ↗
2. Z. Hu, C. Cao, M. Pozuelo, M. Sokoluk, J.-M. Yang, and X. Li: Metall. Mater. Trans. A, 2019, vol. 50, pp. 4620–31.10.1007/s11661-019-05389-5 ↗
3. H. Dugdale, D.E.J. Amstrong, E. Tarleton, S.G. Roberts, and S. Lozano-Perez: Acta Mater., 2013, vol. 61, pp. 4707-13.10.1016/j.actamat.2013.05.012 ↗
4. J. Ast, Th. Przybilla, V. Maier, K. Durst, and M. Göken: J. Mater. Res., 2014, vol. 29, pp. 2129-40.10.1557/jmr.2014.240 ↗
5. T. Klünsner, S. Wurster, P. Supancic, R. Ebner, M. Jenko, J. Glätzle, A. Püschnel, and R. Pippan: Acta Mater., 2011, vol. 59, pp. 4244-52.10.1016/j.actamat.2011.03.049 ↗
6. M. Jonke, T. Klünsner, P. Supancic, W. Harrer, J. Glätzle, R. Barbist, and R. Ebner: Int. J. Refract. Metals Hard Mater., 2017, 64, 219–24.10.1016/j.ijrmhm.2016.11.003 ↗
7. R. Pippan, S. Wurster and D. Kiener: Mater. Des., 2018, vol. 159, pp. 252-67.10.1016/j.matdes.2018.09.004 ↗
8. J. Gong and A. Wilkinson: Philos. Mag. Lett., 2010, vol. 90, pp. 503-12.10.1080/09500831003772989 ↗
9. D.E.J. Armstrong, A.J. Wilkinson, and S.G. Roberts: J. Mater. Res., 2009, vol. 24, pp. 3268-76.10.1557/jmr.2009.0396 ↗
10. D.E.J. Armstrong, A.J. Wilkinson, and S.G. Roberts: Philos. Mag. Lett., 2011, vol. 91, pp. 394-400.10.1080/09500839.2011.573813 ↗
11. S. Wurster, C. Motz, and R. Pippan: Philos. Mag., 2012, vol. 92, pp. 1803-25.10.1080/14786435.2012.658449 ↗
12. F. Iqbal, J. Ast, M. Göken, and K. Durst: Acta Mater., 2012, vol. 60, pp.1193-1200.10.1016/j.actamat.2011.10.060 ↗
13. D. Kiener, C. Motz, T. Schöberl, M. Jenko, and G. Dehm: Adv. Eng. Mater. 2006, vol. 8, pp. 1119-25.10.1002/adem.200600129 ↗
14. M.G. Mueller, M. Fornabaio, G. Zagar, and A. Mortensen: Acta Mater., 2016, vol. 105, pp. 165-75.10.1016/j.actamat.2015.12.006 ↗
15. V. Pejchal, M. Fornabaio, G. Zagar, and A. Mortensen: J. Mech. Phys. Solids, 2017, vol. 109, pp. 34-49.10.1016/j.jmps.2017.08.005 ↗
16. N. Chawla and K.K. Chawla, Metal Matrix Composites, Springer Science + Business Media Inc., New York, NY, 2006.10.1007/b101197 ↗
17. A. Mortensen and T.W. Clyne, in European White Book of Fundamental Research in Materials Science, Max-Planck-Institute für Metallforschung, Stuttgart, 2001, pp. 210-16.
18. J.C. Williams and E.A. Starke: Acta Mater. 2003, vol. 51, pp. 5775-99.10.1016/j.actamat.2003.08.023 ↗
19. D.R. Clarke: J. Am. Ceram. Soc., 1992, vol. 75, pp. 739-59.10.1111/j.1151-2916.1992.tb04138.x ↗
20. J.W. Kaczmar, K. Pietrzak and W. Włosiński: J. Mater. Proc. Technol., 2000, vol. 106, pp. 58-67.10.1016/S0924-0136(00)00639-7 ↗
21. A.A. Mazen and A.Y. Ahmed: J. Mater. Eng. Perform., 1998, vol. 7, pp. 393–401.10.1361/105994998770347846 ↗
22. M. Chmielewski, K. Pietrzak, A. Strojny-Nędza, B. Dubiel, and A. Czyrska-Filemonowicz: Int. J. Mater. Res., 2014, vol. 105, pp. 200–07.10.3139/146.111002 ↗
23. M. Chmielewski, K. Pietrzak, M. Basista, and W. Węglewski: Int. J. Refract. Met. Hard Mater., 2016, vol. 54, pp. 196-202.10.1016/j.ijrmhm.2015.07.012 ↗
24. W. Węglewski, M. Basista, A. Manescu, M. Chmielewski, K. Pietrzak, and Th. Schubert: Composites, Part B, 2014, vol. 67, pp.119–24.10.1016/j.compositesb.2014.06.027 ↗
25. Simpleware ScanIP/FE v.4.3, Simpleware Ltd., Exeter, UK, 2011.
26. ABAQUS/Standard, Release 6.14-1. Dassault Systems Simulia Corporation, Providence, RI, 2014.
27. G. Lin and K.S. Chan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3239-51.10.1007/s11661-999-0234-2 ↗
28. W. Węglewski, K. Bochenek, M. Basista, Th. Schubert, U. Jehring, J. Litniewski, and S. Mackiewicz: Comput. Mater. Sci., 2013, vol. 77, pp. 19-30.10.1016/j.commatsci.2013.04.007 ↗
29. A. Sully and E. Brandes, Chromium. Publ Butterworth, London, 1971.
30. R.G. Munro: J. Am. Ceram. Soc., 1997, vol. 80, pp. 1919-28.10.1111/j.1151-2916.1997.tb03074.x ↗
31. P.P. Camanho and C.G. Davila CG: NASA/TM 2002, 211737.
32. G. Alfano and M.A. Crisfield: Int. J. Numer. Methods Eng., 2001, vol. 50, pp.1701–36.10.1002/nme.93 ↗
33. M.N. Yuan, Y.Q. Yang, C. Li, P.Y. Heng, and L.Z. Li: Mater. Des., 2012, vol. 38, pp. 1–6.10.1016/j.matdes.2011.12.043 ↗
34. Q. Xu and Z.Lu: Int. J. Plast., 2013, vol. 41, pp. 147–64.10.1016/j.ijplas.2012.09.008 ↗
35. H. Qing: Mater. Des., 2013, vol. 51, pp. 438–47.10.1016/j.matdes.2013.04.051 ↗
36. Y. Mi, M.A. Crisfield, and G.A.O. Davies: J. Compos. Mater., 1998, vol. 32, pp. 1246–72.10.1177/002199839803201401 ↗
37. X. Lu, M. Fernández, R.S. Bradley, S.D. Rawson, M. Brien, B. Hornberger, M. Leibowitz, G. Tozzi and P.J. Withers: Acta Biomater., 2019, 96, 400-11.10.1016/j.actbio.2019.06.042 ↗