journal article·2020-02Open access

Effects of Er and Zr Additions on the As-Cast Microstructure and on the Solution-Heat-Treatment Response of Innovative Al-Si-Mg-Based Alloys

M. Colombo, R. H. Buzolin, E. Gariboldi, L. Rovatti, R. Vallant, C. Sommitsch

Abstract

The microstructure of Al-Si-Mg alloys strongly depends on their chemical composition and the heat treatment they undergo during production. The influence of solution heat treatment (SHT) and the addition of Er and Zr on the microstructure of gravity-cast A356 (Al-7Si-0.4Mg) were examined. The reference as-cast microstructure is characterized by the grain size and morphology of eutectic Si, as well as the morphology, area fraction, and chemical composition of the intermetallic compounds. The morphology of eutectic Si is unstable during SHT; the evolution mechanisms can be described using thermodynamic and kinetic models and have been validated using optical and scanning electron microscope (SEM) micrographs. The effect of high-temperature exposure during SHT, on the other hand, plays a minor role on the quantity and morphology of the intermetallic compounds, as demonstrated by optical and SEM micrographs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. I.J. Polmear: Light Alloys: from Traditional Alloys to Nanocrystals, Butterworth-Heinemann, Oxford, United Kingdom, 2005.
2. K.T. Kashyap, S. Murali, K.S. Raman, and K.S.S. Murthy: Mater. Sci. Technol., 1993, vol. 9, pp. 189–204.10.1179/mst.1993.9.3.189 ↗
3. R. Chen, Y. Shio, Y. Xub, and C. Liu: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 1645–52.10.1016/S1003-6326(14)63236-2 ↗
4. K.T. Akhil, S. Arul, and R. Sellamuthu: Proc. Mater. Sci., 2014, vol. 5, pp. 362–68.10.1016/j.mspro.2014.07.278 ↗
5. Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2887–99.10.1007/s11661-003-0189-7 ↗
6. L.Y. Zhang, Y.H. Jiang, Z. Ma, S.F. Shan, Y.Z. Jia, C.Z. Fan, and W.K. Wang: J. Mater. Process. Technol., 2008, vol. 207, pp. 107–11.10.1016/j.jmatprotec.2007.12.059 ↗
7. M.A. Moustafa: J. Mater. Process. Technol., 2009, vol. 209, pp. 605–10.10.1016/j.jmatprotec.2008.02.073 ↗
8. C. Do-Lee: Mater. Sci. Eng. A, 2007, vol. 464, pp. 249–54.10.1016/j.msea.2007.01.130 ↗
9. C.H. Càceres: Scripta Metall. Mater., 1995, vol. 32, pp. 1851–56.10.1016/0956-716X(95)00031-P ↗
10. Q.G. Wang and C.J. Davidson: J. Mater. Sci., 2001, vol. 36, pp. 739–50.10.1023/A:1004801327556 ↗
11. M. Zhu, Z. Jian, G. Yang, and Y. Zhou: Mater. Design, 2012, vol. 36, pp. 243–49.10.1016/j.matdes.2011.11.018 ↗
12. E. Sjölander and S. Seifeddine: J. Mater. Process. Technol., 2010, vol. 210, pp. 1249–59.10.1016/j.jmatprotec.2010.03.020 ↗
13. F.H. Samuel: J. Mater. Sci., 1998, vol. 33, pp. 2283–97.10.1023/A:1004383203476 ↗
14. M.A. Moustafa, F.H. Samuel, and H.W. Doty: J. Mater. Sci., 2003, vol. 38, pp. 4507–22.10.1023/A:1027333602276 ↗
15. ASTM Standards (2012) Standard practice for heat treatment of aluminum-alloy castings from all processes. ASTM, Philadelphia.
16. G. Sharma, R.V. Ramanujan, and G.P. Tiwari: Acta Mater., 2000, vol. 48, pp. 875–89.10.1016/S1359-6454(99)00378-X ↗
17. J.C.M. Kampe, T.H. Courtney, and Y. Leng: Acta Metall., 1989, vol. 37, pp. 1735–45.10.1016/0001-6160(89)90059-X ↗
18. T.H. Courtney and J.C.M. Kampe: Acta Metall., 1989, vol. 37, pp. 1747–58.10.1016/0001-6160(89)90060-6 ↗
19. E. Ogris, A. Wahlen, H. Luechinger, and P.J. Uggowitzer: J. Light Met., 2002, vol. 2, pp. 263–69.10.1016/S1471-5317(03)00010-5 ↗
20. J.A. Taylor, D.H. St John, J. Barresi, and M.J. Couper: Mater. Sci. Forum, 2000, vol. 331, pp. 277–82.10.4028/www.scientific.net/MSF.331-337.277 ↗
21. P.A. Rometsch, L. Arnberg, and D.L. Zhang: Int. J. Cast Met. Res., 2016, vol. 12, pp. 1–8.10.1080/13640461.1999.11819338 ↗
22. J. Hernandez-Sandoval, G.H. Garza-Elizondo, A.M. Samuel, S. Valtiierra, and F.H. Samuel: Mater. Des., 2014, vol. 58, pp. 89–101.10.1016/j.matdes.2014.01.041 ↗
23. Y.-C. Tsai, C.-Y. Chou, S.-L. Lee, C.-K. Lin, J.-C. Lin, and S.W. Lim: J. Alloys Compds., 2009, vol. 487, pp. 157–62.10.1016/j.jallcom.2009.07.183 ↗
24. A.K. Dahle, K. Nogita, S.D. McDonald, C. Dinnis, and L. Lu: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 243–48.10.1016/j.msea.2005.09.055 ↗
25. A. Mazahery and M.O. Shabani: J. Mater., 2014, vol. 66, pp. 726–38.
26. J.H. Li, X.D. Wang, T.H. Ludwig, Y. Tsunekawa, L. Arnberg, J.Z. Jiang, and P. Schumacher: Acta Mater., 2015, vol. 84, pp. 153–63.10.1016/j.actamat.2014.10.064 ↗
27. M. Colombo, E. Gariboldi, and A. Morri: J. Alloys Compds., 2017, vol. 708, pp. 1234–44.10.1016/j.jallcom.2017.03.076 ↗
28. M. Colombo, E. Gariboldi, and A. Morri: Mater. Sci. Eng. A, 2018, vol. 713, pp. 151–60.10.1016/j.msea.2017.12.068 ↗
29. L. Ceschini, A. Morri, A. Morri, A. Gamberini, and S. Messieri: Mater. Des., 2009, vol. 30, pp. 4525–41.10.1016/j.matdes.2009.05.012 ↗
30. Z. Fan, Y. Wang, Y. Zhang, T. Qin, X.R. Zhou, G.E. Thompson, T. Pennycook, and T. Hashimoto: Acta Mater., 2015, vol. 84, pp. 292–304.10.1016/j.actamat.2014.10.055 ↗
31. P. Schumacher and A.L. Greer: Mater. Sci. Eng. A, 1994, vol. 178, pp. 309–13.10.1016/0921-5093(94)90559-2 ↗
32. Y. Wang, L. Zhou, and Z. Fan: Light Metals, TMS, Warrendale, PA, 2016, pp. 725–29.
33. Z. Chen, H. Kang, G. Fan, J. Li, Y. Lu, J. Jie, Y. Zhang, T. Li, X. Jian, and T. Wang: Acta Mater., 2016, vol. 120, pp. 168–78.10.1016/j.actamat.2016.08.045 ↗
34. H. Okamoto: J. Phase Equilibria, 1993, vol. 14, pp. 120–21.10.1007/BF02652171 ↗
35. P.S. Mohanty and J.E. Gruzleski: Acta Mater., 1996, vol. 44, pp. 3749–60.10.1016/1359-6454(96)00021-3 ↗
36. M.V. Karpets, Y.V. Milman, O.M. Barabash, N.P. Korzhova, O.N. Senkov, D.B. Miracle, T.N. Legkaya, and I.V. Voskoboynik: Intermetallics, 2003, vol. 11, pp. 241–49.10.1016/S0966-9795(02)00234-0 ↗
37. S. Nafisi, R. Ghomashchi, and H. Vali: Mater. Charact., 2008, vol. 59, pp. 1466–73.10.1016/j.matchar.2008.01.014 ↗
38. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald, and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–60.10.1007/s11661-001-0352-y ↗
39. M.M. Makhlouf and H.V. Guthy: J. Light Met., 2001, vol. 1, pp. 199–218.10.1016/S1471-5317(02)00003-2 ↗
40. J.H. Li, M. Albu, F. Hofer, and P. Schumacher: Acta Mater., 2015, vol. 83, pp. 187–202.10.1016/j.actamat.2014.09.040 ↗
41. T. Hosch and R.E. Napolitano: Mater. Sci. Eng. A, 2010, vol. 528, pp. 226–32.10.1016/j.msea.2010.09.008 ↗
42. H.P. Stuewe and O. Kolednik: Acta Metall., 1988, vol. 36, pp. 1705–08.10.1016/0001-6160(88)90237-4 ↗
43. H.V. Guthy: Evolution of the Eutectic Microstructure in Chemically Modified and Unmodified Aluminum Silicon Alloys, Worcester Polytechnic Institute, Worcester, MA, 2002.
44. S. Fujikawa, K. Hirano, and Y. Fukushima: Metall. Trans., 1974, vol. 5, pp. 1811–15.10.1007/BF02644145 ↗
45. J.L. Murray and A.J. McAlister: Bull. Alloy Phase Diagrams, 1984, vol. 5, pp. 74–84.10.1007/BF02868729 ↗
46. L.J. Colley, M.A. Wells, and W.J. Poole: Can. Metall. Q., 2014, vol. 53, pp. 125–37.10.1179/1879139513Y.0000000112 ↗
47. Y. Zhang, K. Gao, S. Wen, H. Huang, Z. Nie, and D. Zhou: J. Alloys Compds., 2014, vol. 610, pp. 27–34.10.1016/j.jallcom.2014.04.093 ↗
48. S.J. Rothman, N.L. Peterson, L.J. Nowicki, and L.C. Robinson: Phys. Stat. Solidi (b), 1974, vol. 9, pp. 29–33.10.1002/pssb.2220630151 ↗
49. H. Okamoto: J. Phase Equilibria Diffus., 2011, vol. 32, pp. 261–62.10.1007/s11669-011-9877-y ↗
50. H. Okamoto: J. Phase Equilibria, 2002, vol. 23, pp. 455–56.10.1361/105497102770331497 ↗
51. K. Hirano and S. Fujikawa: J. Nucl. Mater., 1978, vol. 69, pp. 564–66.10.1016/0022-3115(78)90275-1 ↗
52. S. Fujikawa, K. Hirano, and Y. Fukushima: Metall. Trans. A, 1978, vol. 9A, pp. 1811–15.10.1007/BF02663412 ↗
53. S. Mantl, W. Petry, K. Schroeder, and G. Vogl: Phys. Rev. B, 1983, vol. 27, pp. 5313–31.10.1103/PhysRevB.27.5313 ↗