Thermodynamic Stability of Nano-grained Alloys Against Grain Coarsening and Precipitation of Macroscopic Phases
Source abstract
Abstract
Abstract Thermodynamic conditions are derived here for binary alloys to have their grain boundary (GB) energies negative, ensuring the stability of some nano-grained (NG) alloys. All binary alloys are found to belong to one of the following three types. Type 1 is the unstable NG alloy both against grain coarsening and precipitation of a macro-phase. Type 2 is the partly stable NG alloy, stable against coarsening but not against precipitation. Type 3 is the fully stable NG alloy, both against coarsening and precipitation. Alloys type 1 have negative, or low-positive interaction energies between the components. Alloys type 2 have medium-positive interaction energies, while alloys type 3 have high-positive interaction energies. Equations are derived for critical interaction energies separating alloys type 1 from type 2 and those from type 3, being functions of the molar excess GB energy of the solute, temperature (T) and composition of the alloy. The criterion to form a stable NG alloy is formulated through a new dimensionless number (Ng), defined as the ratio of the interaction energy to the excess molar GB energy of the solute, both taken at zero Kelvin. Systems with Ng number below 0.6 belong to alloy type 1, systems with Ng number between 0.6 and 1 belong to alloy type 2, while systems with Ng number above 1 belong to alloy type 3, at least at T = 0 K. The larger is the Ng number, the higher is the maximum T of stability of the NG alloy. By gradually increasing temperature alloys type 3 convert first into type 2 and further into type 1. The Ng number is used here to evaluate 16 binary tungsten-based (W-B) alloys. At T = 0 K type 3 NG alloys are formed with B = Cu, Ag, Mn, Ce, Y, Sc, Cr; type 2 is formed in the W-Ti system, while type 1 alloys are formed with B = Al, Ni, Co, Fe, Zr, Nb, Mo and Ta. For the W-Ag system the region of stability of the NG alloys is shown on a calculated phase diagram, indicating also the stable grain size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A. Táborosi, R.K. Szilagyi, B. Zsirka, O. Fónagy, E. Horváth, J. Kristóf.: Inorg. Chem., 2018, 57, pp. 7151–7167.10.1021/acs.inorgchem.8b00877 ↗
2. E. Illés, M. Szekeres, I.Y. Tóth, Á. Szabó, B. Iván, R. Turcu, L. Vékás, I. Zupkó, G. Jaics, E. Tombácz, J Magnetism Magnetic Mater, 2018, 451, pp. 710-720.10.1016/j.jmmm.2017.11.122 ↗
3. K. Molnar, C. Voniatis, D. Feher, A. Ferencz, G. Weber, M. Zrinyi, A. Jedlovszky-Hajdu, Byophys J, 2018, 114, pp. 363a10.1016/j.bpj.2017.11.2013 ↗
4. Z. Fogarassy, N. Oláh, I. Cora, Z.E. Horváth, T. Csanádi, A. Sulyok, K. Balázsi, J Eur Ceram Soc, 2018, 38, pp. 2886-2892.10.1016/j.jeurceramsoc.2018.02.033 ↗
5. M. Weszl, K.L. Tóth, I. Kientzl, P. Nagy, D. Pammer, L. Pelyhe, N. E. Vrana, D. Scharnweber, C. Wolf-Brandstetter, J.F. Árpád, E. Bognár, Mater Sci Eng C, 2018, 78, pp. 69-78.10.1016/j.msec.2017.04.032 ↗
6. É. Fazakas, Z. Mátyás-Karácsony, R. Bak, L.K. Varga, Am. J. Analyt. Chem, 2017, 8, pp. 171-179.10.4236/ajac.2017.83014 ↗
7. G.F. Samu, Á. Veres, S. P. Tallósy, L. Janovák, I. Dékány, A. Yepez, R. Luque, C. Janáky, Catalysis Today, 2017, 284, pp. 3-10.10.1016/j.cattod.2016.07.010 ↗
8. M. Czagány, P. Baumli, G. Kaptay, Appl Surf Sci, 2017, 423 pp. 160-169.10.1016/j.apsusc.2017.06.168 ↗
9. O. Pitkänen, T. Järvinen, H. Cheng, G. S. Lorite, A. Dombovari, L. Rieppo, S. Talapatra, H. M. Duong, G. Tóth, K. L. Juhász, Z. Kónya, A. Kukovecz, P. M. Ajayan, R. Vajtai, K. Kordás: Sci Reports, 2017, 7, 16594.10.1038/s41598-017-16604-x ↗
10. F. Bíró, C. Dücső, G.Z. Radnóczi, Z. Baji, M. Takács, I. Bársony, Sensors Actuators B, 2017, 247, pp. 617-625.10.1016/j.snb.2017.03.075 ↗
11. V. Takáts, J. Hakl, A. Csík, H.F. Bereczki, G. Lévai, M. Godzsák, T.I. Török, G. Kaptay, K. Vad, Surf Coating Technol, 2017, 326, pp. 121-125.10.1016/j.surfcoat.2017.07.024 ↗
12. O. Tapasztó, J. Balko, V. Puchy, P. Kun, G. Dobrik, Z. Fogarassy, Z.E. Horváth, J. Dusza, K. Balázsi, C. Balázsi, L. Tapasztó: Sci Rep. 2017, 7, 10087.10.1038/s41598-017-10290-5 ↗
13. W. Rao, D. Wang, T. Kups, E. Baradács, B. Parditka, Z. Erdélyi, P. Schaaf, ACS Appl. Mater. Interfaces, 2017, 9, pp. 6273–6281.10.1021/acsami.6b13602 ↗
14. G. Czel, K. Tomolya, M. Sveda, A. Sycheva, F. Kristaly, A. Roosz, D. Janovszky. J Non-cryst Solids, 2017, 458, pp. 41-51.10.1016/j.jnoncrysol.2016.12.017 ↗
15. N. Oláh, Z. Fogarassy, A. Sulyok, M. Veres, G. Kaptay, K. Balázsi: Surf. Coat. Technol. 2016, 302, pp. 410-419.10.1016/j.surfcoat.2016.06.047 ↗
16. G. Levai, M. Godzsák, T.I. Török, J. Hakl, V. Takáts, A. Csik, K. Vad, G. Kaptay, Metall Mater Trans A, 2016, 47A, pp. 3580 – 3596.10.1007/s11661-016-3545-0 ↗
17. A. Lekatou, A.E. Karantzalis, A. Evangelou, V. Gousia, G. Kaptay, Z. Gacsi, P. Baumli, A. Simon, Mater Design, 2015, 65, pp. 1121-1135.10.1016/j.matdes.2014.08.040 ↗
18. O.L. Galkina, A. Sycheva, A. Blagodatskiy, G. Kaptay, V.L. Katanaev, G.A. Seisenbaeva, V.G. Kessler, A.V. Agafonov, Surf Coat Technol, 2014, 253, pp. 171-179.10.1016/j.surfcoat.2014.05.033 ↗
19. E. Sohn, X. Li, W.Y. He, S. Jiang, Z. Wang, K. Kang, J.H. Park, H. Berger, L. Forró, K.T.Law, J.Shan, K.F. Mak, Nature Mater, 2018, 17, 504-508.10.1038/s41563-018-0061-1 ↗
20. H. Gleiter, Acta Mater, 2000, 48, pp. 1-29.10.1016/S1359-6454(99)00285-2 ↗
21. R. Valiev, Nature Mater, 2004, 3, pp. 511-516.10.1038/nmat1180 ↗
22. M. A. Meyers, A. Mishra, D. J. Benson, Prog. Mater Sci, 2006, 51, pp. 427-556.10.1016/j.pmatsci.2005.08.003 ↗
23. M. Dao, L. Lu, R.J. Asaro, J.T.M. De Hosson, E. Ma, Acta Mater, 2007, 55, pp. 4041-4065.10.1016/j.actamat.2007.01.038 ↗
24. R.H.R. Castro, Mater Letters, 2013, 96, pp. 45-56.10.1016/j.matlet.2013.01.007 ↗
25. K. Lu: Nat. Rev. Mater. 2016, 1, 16019.10.1038/natrevmats.2016.19 ↗
26. R.H.R.Castro, D.Gouvea, J Amer Ceram Soc, 2016, 99, pp. 1105-1121.10.1111/jace.14176 ↗
27. T.J.Rupert, Curr Opinion Solid State Mater Sci, 2016, 20, pp. 257-267.10.1016/j.cossms.2016.05.005 ↗
28. I.A.Ovidko, R.Z.Valiev, Y.T.Zhu, Progr Mater Sci, 2018, 94, pp. 462-540.10.1016/j.pmatsci.2018.02.002 ↗
29. P.K.Sahoo, S.S.K. Kamal, M.Premkumar, B.Sreedhar, S.K.Srivastava, L.Durai. Int J Refr Met Hard Mater, 2011, 29, 547-554.10.1016/j.ijrmhm.2011.03.011 ↗
30. G.T.P.Azar, H.R. Rezaie, B. Gogari, H.Razavizadeh, J Alloys Compds, 2013, 574, pp. 432-436.10.1016/j.jallcom.2013.04.172 ↗
31. C.Ren, M.Koopman, Z.Z. Fang, H.Zhang, B. van Devener, Int J Refract Met Hard Mater, 2016, 61, pp. 273-278.10.1016/j.ijrmhm.2016.10.003 ↗
32. W.T.Qiu, Y.Pang, Z.Xiao, Z.Li, Int J Refr Met Hard Mater, 2016, 61, pp. 91-97.10.1016/j.ijrmhm.2016.07.013 ↗
33. C.Ren, Z.Z.Fang, H.Zhang, M.Koopman, Int J Refr Met Hard Mater, 2016, 61, pp. 273-278.10.1016/j.ijrmhm.2016.10.003 ↗
34. M.Kapoor, T.Kaub, K.A.Darling, B.L.Boyce, G.B.Thompson, Acta Mater, 2017, 126, pp. 564-575.10.1016/j.actamat.2016.12.057 ↗
35. J.T.Zhao, J.Y.Zhang, L.F.Cao, Y.Q.Wang, P.Zhang, K.Wu, G.Liu, J.Sun, Acta Mater, 2017, 132, pp. 550-564.10.1016/j.actamat.2017.05.007 ↗
36. Z.L.Zhang, J.M.Guo, G.Dehm, R.Pippan, Acta Mater, 2017, 138, pp. 42-51.10.1016/j.actamat.2017.07.039 ↗
37. Chakraverty, K. Sikdarm, S.S. Singh, D. Roy, C.C. Koch: J. Alloys Compds., 2017, 716: 197-203.10.1016/j.jallcom.2017.05.093 ↗
38. G.Csiszár, A.Makvandi, E.J.Mittemeijer, J Appl Cryst, 2017, 50, pp. 152-171.10.1107/S1600576716019129 ↗
39. R.Raghavan, T.P.Harzer, S.Djaziri, S.W.Hieke, C.Kirchlechner, G.Dehm, J Mater Sci, 2017, 52, 913-920.10.1007/s10853-016-0386-6 ↗
40. S.S.V.Tatiparti, F.Ebrahimi, J Alloys Compds, 2017, 694, pp. 632-635.10.1016/j.jallcom.2016.09.286 ↗
41. P.S. Roodposthi, M. Saber, C. Koch, R.Scattergood, S.Shahbazmohamadi, J Alloys Compds, 2017, 720, pp. 510-520.10.1016/j.jallcom.2017.05.261 ↗
42. O.K.Donaldson, K.Hattar, T.Kaub, G.B.Thomson, J Mater Res, 2018, 33, pp. 68-80.10.1557/jmr.2017.296 ↗
43. J.Hu, Y.N.Shi, K.Lu, Scr mater, 2018, 154, pp. 182-185.10.1016/j.scriptamat.2018.05.036 ↗
44. H. Kotan, J Alloys Compds, 2018, 749, pp. 948-954.10.1016/j.jallcom.2018.03.324 ↗
45. X.G.Li, L.F.Cao, J.Y.Zhang, J.Li, J.T.Zhao, X.B.Feng, Y.Q.Wang, K.Wu, P.Zhang, G.Liu, J.Sun, Acta Mater, 2018, 151, pp. 87-99.10.1016/j.actamat.2018.03.044 ↗
46. J.F. Curry, T.F. Babuska, T.A. Furnish et al.: Adv. Mater. 2018, 30, 1802026.10.1002/adma.201802026 ↗
47. Y.Z.Chen, K.Wang, G.B.Shan, A.V.Ceguerra, L.K.Huang, H.Dong, L.F.Cao, S.P.Ringer, F.Liu, Acta Mater, 2018, 158, pp. 340-353.10.1016/j.actamat.2018.07.070 ↗
48. J. Weissmuller, Nanostruct. Mater, 1993, 3, pp. 261-272.10.1016/0965-9773(93)90088-S ↗
49. J. Weissmuller, J. Mater. Res., 1994, 9, pp. 4-7.10.1557/JMR.1994.0004 ↗
50. D.L. Beke, C. Cserháti, I.A. Szabó: Nanostr. Mater., 1997, 9, pp. 665-668.10.1016/S0965-9773(97)00146-3 ↗
51. R.Kirchheim, Acta Mater, 2002, 40, pp. 413-419.10.1016/S1359-6454(01)00338-X ↗
52. D.L.Beke, C.Cserháti, I.A.Szabó, J Appl Phys, 2004, 95, pp. 4996-5001.10.1063/1.1688461 ↗
53. F. Liu, R. Kirchheim, J Cryst Growth, 2004, 264, pp. 385-391.10.1016/j.jcrysgro.2003.12.021 ↗
54. F. Liu, R. Kirchheim, Scripta Mater, 2004, 51, pp. 521-525.10.1016/j.scriptamat.2004.05.042 ↗
55. P. C.Millett, R. P. Selvam, S. Bansal,A. Saxena, Acta Mater, 2005, 53, pp. 3671-3678.10.1016/j.actamat.2005.04.031 ↗
56. L.S.Shvindlerman, G.Gottstein, Scripta Mater, 2006, 54, pp. 1041-1045.10.1016/j.scriptamat.2005.11.047 ↗
57. R. Kirchheim, Scripta Mater, 2006, 55, pp. 963-964.10.1016/j.scriptamat.2006.07.037 ↗
58. R. Kirchheim, Acta Mater, 2007, 55, pp. 5129-5138.10.1016/j.actamat.2007.05.047 ↗
59. R. Kirchheim, Acta Mater, 2007, 55, pp. 5139-5148.10.1016/j.actamat.2007.05.033 ↗
60. P. C. Millett, R. P. Selvam, A. Saxena, Acta Mater, 2007, 55, pp. 2329-2336.10.1016/j.actamat.2006.11.028 ↗
61. J. R. Trelewicz, C. A. Schuh: Phys. Rev B, 2009, 79:094112.10.1103/PhysRevB.79.094112 ↗
62. F.Liu, Z.Chen, W.Yang, C.L.Yang, H.F.Wang, G.C.Yang, Mater Sci Eng A, 2010, 457, pp. 13-17.10.1016/j.msea.2007.01.142 ↗
63. Y. Purohit, L. Sun, D.L. Irving, R.O. Scattergood, D.W. Brenner: Mater. Sci. Eng. A 2010, 527, 1769-1775.10.1016/j.msea.2009.11.034 ↗
64. K.A.Darling, M.A.Tschopp, B.K.VanLeeuwen, M.A.Atwater, Z.K.Liu, Comput Mater Sci, 2014, 84, pp. 255-266.10.1016/j.commatsci.2013.10.018 ↗
65. N. X. Zhou, J. Luo, Mater Lett, 2014, 115, pp. 268-271.10.1016/j.matlet.2013.09.093 ↗
66. T. Chookajorn, H.A.Murdoch, C.A.Schuh, Science, 2012, 337, pp. 951-954.10.1126/science.1224737 ↗
67. H.A. Murdoch, C.A. Schuh, Acta Mater, 2013, 61, pp. 2121-2132.10.1016/j.actamat.2012.12.033 ↗
68. H.A. Murdoch, C.A. Schuh, J Mater Res, 2013, 28, pp. 2154-2163.10.1557/jmr.2013.211 ↗
69. M. Saber, H. Kotan, C.C. Koch, R.O. Scattergood: J. Appl. Phys., 2013, 113, 063515.10.1063/1.4791704 ↗
70. T. Chookajorn, C.A. Schuh: Phys. Rev. B, 2014, 89, 064102.10.1103/PhysRevB.89.064102 ↗
71. T. Chookajorn, C.A. Schuh, Acta Mater, 2014, 73, 128-138.10.1016/j.actamat.2014.03.039 ↗
72. A.R.Kalidindi, T.Chookajoorn, C.A.Schuh, JOM, 2015, 67, 2834-2843.10.1007/s11837-015-1636-9 ↗
73. F. Abdeljawad, S.M. Foiles, Acta Mater, 2015, 101, 159-171.10.1016/j.actamat.2015.07.058 ↗
74. N. Zhou, T. Hu, J. Huang, J. Luo, Scr Mater, 2016, 124, pp. 160-163.10.1016/j.scriptamat.2016.07.014 ↗
75. T. Liang, Z. Chen, X. Yang, J. Zhang, P. Zhang, Int J Mater Res, 2017, 108, pp. 435-440.10.3139/146.111496 ↗
76. O. Waseda, H. Goldenstein, G.F.B. LenzSilva, A. Neiva, P. Chantrenne, J. Morthomas, M. Perez, C.S. Becquart, R.G.A. Veiga: Model. Simul. Mater. Sci. Eng., 2017, 25, 075005.10.1088/1361-651X/aa83ef ↗
77. D.A.Aksyonov, A.G.Lipnitskii, Comp Mater Sci, 2017, 137, pp. 266-272.10.1016/j.commatsci.2017.05.034 ↗
78. F. Abdeljawad, P. Lu, N. Argibay, B.G. Clarke, B.L. Boyce, S.M. Foiles, Acta Mater, 2017, 126, pp. 528-539.10.1016/j.actamat.2016.12.036 ↗
79. A.R.Kalidindi, C.A.Schuh, Acta Mater, 2017, 132, pp. 128-137.10.1016/j.actamat.2017.03.029 ↗
80. Y.Zhang, G.J.Tucker, J.R.Trelevicz, Acta Mater, 2017, 131, pp. 39-47.10.1016/j.actamat.2017.03.060 ↗
81. A.R.Kalidindi, C.A.Schuh, J Mater Res, 2017, 32, 1993-2000.10.1557/jmr.2017.188 ↗
82. J.D.Schuler, T.J.Rupert, Acta Mater, 2017, 140, pp. 196-205.10.1016/j.actamat.2017.08.042 ↗
83. S.B. Kadambi, S. Patala: Phys. Rev. Mater., 2017, 1, 043604.10.1103/PhysRevMaterials.1.043604 ↗
84. F.D.Fischer, G.A.Zickler, J.Svoboda, Phil Mag, 2017, 97, 1963-1977.10.1080/14786435.2017.1322728 ↗
85. W.T.Xing, A.R.Kalidindi, C.A.Schuh, Scr Mater, 2017, 127, 136-140.10.1016/j.scriptamat.2016.09.014 ↗
86. Y.J. Zhao, J.Q. Zhou, J Nanopart Res, 2017, 19, 406.10.1007/s11051-017-4111-4 ↗
87. C.J.O Brien, C.M.Barr, P.M.Price, K.Hattar, S.M.Foiles, J Mater Sci, 2018, 53, pp. 2911-2927.10.1007/s10853-017-1706-1 ↗
88. K.Graetz, J.S.Paras, C.A.Schuh, Materialia, 2018, 1, pp. 89-98.10.1016/j.mtla.2018.05.005 ↗
89. M. A. Tschopp, H. A. Murdoch, L. J. Kecskes, K. A. Darling, JOM, 2014, 66, pp. 1000 – 1019.10.1007/s11837-014-0978-z ↗
90. R. A. Andrievski, J Mater Sci, 2014, 49, pp. 1449-1460.10.1007/s10853-013-7836-1 ↗
91. M. Saber, C.C. Koch, and R.O. Scattergood, Mater Res Lett, 2015, 3, pp. 65-75.10.1080/21663831.2014.997894 ↗
92. H.R.Peng, M.M.Gong, Y.Z.Chen, F.Liu, Int Mater Rev, 2017, 62, pp. 303-333.10.1080/09506608.2016.1257536 ↗
93. P.Lejcek, M.Vsianska, M.Sob, J Mater Res, 2018, 33, pp. 2647-2660.10.1557/jmr.2018.230 ↗
94. G.Kaptay, J Mater Sci, 2012, 47, 8320-8335.10.1007/s10853-012-6772-9 ↗
95. G.Kaptay, Adv Colloid Interface Sci, 2018, 256, pp. 163-192.10.1016/j.cis.2018.04.007 ↗
96. J.W. Gibbs: Trans. Conn. Acad. Arts Sci. 1875–1878, vol. 3, pp. 108–248 and 343–524.
97. I.Langmuir, J Am Chem Soc, 1918, 40, pp. 1361–1403.10.1021/ja02242a004 ↗
98. D. McLean. Grain boundaries in metals. Clarendon Press, Oxford, 1957.
99. P. Lejcek. Grain boundary segregation in metals, vol. 136 Springer Series Maters Sci, Springer, Berlin, 2010.
100. G.Kaptay, J Mater Sci, 2016, 51, pp. 1738-1755.10.1007/s10853-015-9533-8 ↗