journal article·2018-10

Effects of Carbon Variation on Microstructure Evolution in Weld Heat-Affected Zone of Nb-Ti Microalloyed Steels

Xiaoping Ma, Xueda Li, Brian Langelier, Baptiste Gault, Sundaresa Subramanian, Laurie Collins

Publisher page

Abstract

We investigated the effects of C concentration variation from 0.028 to 0.058 wt pct on microstructure of the coarse grained heat-affected zone (CGHAZ) of low heat input girth welded Ti-Nb microalloyed steels by using electron microscope and atom probe tomography. It is found that the CGHAZ microstructure exhibits a systematic response to C variation. Increased C raises the temperature for precipitation of NbC. This leads to coarser (Ti, Nb)N-Nb(C, N) but finer delayed strain-induced NbC in the high-C steel than in the low-C steel. Fine strain-induced NbC are ineffective in preventing austenite grain coarsening in CGHAZ due to their fast dissolution upon heating. For a given inter-particle spacing originally determined by (Ti, Nb)N particles, increased epitaxial growth of Nb(C, N) on pre-existing (Ti, Nb)N in the high-C steel results in a smaller austenite grain size of 34 µm in the CGHAZ of the high-C steel than that of 52 µm in the low-C steel. Increased C promotes a microstructure consisting of bainitic lath structure with C Cottrell atmospheres at dislocation debris and martensitic layers of 30 to 100 nm in thickness at inter-lath boundaries in the CGHAZ. Increased C promotes configuration of crystallographic variants belonging to different Bain groups in the neighbors, preferentially twin-related variant pairs within a bainite packet.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. [1] S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, J. Hartmann and S.G. Jansto: Mater. Sci. Eng. A, 2008, vol. 478, pp. 26-37.10.1016/j.msea.2007.06.003 ↗
2. [2] Ivani De S. Bott, Luis F.C.G. Teixeira and Paulo R. Rios: Metall. Trans. A, 2005, vol. 36A, pp. 443-54.10.1007/s11661-005-0315-9 ↗
3. [3] A. Lambert-Perlade. A.F. Gourgues, J. Besson, T. Sturel and A. Pineau: Metall. Mater. Trans. A, 2004, vol. 5A, pp. 1039-53.10.1007/s11661-004-1007-6 ↗
4. A.D. Batte, P.J. Boothby, and A.B. Rothwell: Proc. Int. Symp. Niobium 2001, Orlando, Florida, 2001, pp. 931–58.
5. [5] K. Banerjee, M. Militzer, M. Perez and X. Wang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3161-72.10.1007/s11661-010-0376-2 ↗
6. [6] M. Maalekian, R. Radis, M. Militzer, A. Moreau and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015-2610.1016/j.actamat.2011.11.016 ↗
7. [7] T. Gladman and F.B. Pickering: Effect of grain size on the mechanical properties of ferrous materials, in: T.N. Baker (Ed.), Yield, Flow and fracture of polycrystals, Applied Science pub., London and New York, 1983, pp. 141-98.
8. [8] B.L. Bramfitt and J. G. Speers: Metall. Mater. Trans. A, 1988, vol. 21A, pp. 817-29.
9. [10] F. Matsuda, Y. Fukada, H. Okada, C. Shiga, K. Ikeuchi, Y. Horii, T. Shiwaku and S. Suzuki: Welding in the World/Le Soudage dans le Monde, 1996, vol. 37, pp. 134-54.
10. [11] C.L. Davis and J.E. King: Mater. Sci. Technol., 1993, vol. 9, pp. 8-15.10.1179/mst.1993.9.1.8 ↗
11. [9] A. Cottrell: Brittle fracture from pile-ups in polycrystalline iron, in: T.N. Baker (Ed.), Yield, Flow and fracture of polycrystals, Applied Science pub., London and New York, 1983, pp. 123-29.
12. [12] M. Hillert and L.I. Staffansson: Acta Chem. Scand., 1970, vol. 24, pp. 3618-26.10.3891/acta.chem.scand.24-3618 ↗
13. [13] K. Thompson, D. Lawrence, D.J. Larson, J.O. Olson, T.F. Kelly and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131-39.10.1016/j.ultramic.2006.06.008 ↗
14. [14] B. Gault, M.P. Moody, J.M. Cairney and S.P. Ringer: Atom Probe Microscopy, Springer Science, New York, 2012.10.1007/978-1-4614-3436-8 ↗
15. [15] H.K.D.H. Bhadeshia and J.W. Christian: Metall Trans A, 1990, vol. 21(3), pp. 767- 97.10.1007/BF02656561 ↗
16. [16] M. Nemoto: High voltage electron microscopy, Academic Press, New York, 1974, pp. 230.
17. [17] H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10, pp. 895-907.10.1007/BF02658309 ↗
18. [18] D. Kalish and M. Cohen: Mater. Sci. Eng., 1970, vol. 6, pp. 156-66.10.1016/0025-5416(70)90045-5 ↗
19. [19] M. Peet, S.S. Babu, M.K. Miller and H.K.D.H. Bhadeshia: Scripta Mater., 2004, vol. 50, pp. 1277-81.10.1016/j.scriptamat.2004.02.024 ↗
20. [20] F.G. Caballero, M.K. Miller, S.S. Babu and C. Garcia-Mateo: Acta Mater., 2007, vol. 55, pp. 381-90.10.1016/j.actamat.2006.08.033 ↗
21. [21] A. Cochardt, G. Schoeck and H. Wiedersich: Acta Metall., 1955, vol. 3(6), pp. 533-37.10.1016/0001-6160(55)90111-5 ↗
22. S.V. Subramanian, F. Boratto, J.J. Jonas, and C.M. Sellars: Proc. Int. Symp. Microalloyed Bar Forg. Steels, Hamilton, Canada, 1990, pp. 120–36.
23. [23] M.T. Nagata, J.G. Speer and D.K. Matlock: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3099-110.10.1007/s11661-002-0294-z ↗
24. H. Zou: Kinetics of Carbonitride Precipitation in Microalloyed Steels. Ph.D. Thesis, McMaster University, Canada, 1991.
25. [25] S.G. Hong, K.B. Kang and C.G. Park: Scripta Mater., 2002, vol. 46, pp. 163-68.10.1016/S1359-6462(01)01214-3 ↗
26. [26] X. Ma, C. Miao, B. Langelier and S. Subramanian: Mater. Des., 2017, vol. 132, pp. 244-49.10.1016/j.matdes.2017.07.006 ↗
27. [27] P. Gong, E.J. Palmiere and W.M. Rainforth: Acta Mater., 2015, vol. 97, pp. 392-403.10.1016/j.actamat.2015.06.057 ↗
28. [28] J.W. Cahn: Acta Matell., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
29. [29] T. Nishizawa: The 131 st and 132 nd Nishiyama Memorial Seminar, ISIJ, Tokyo, 1990, pp. 17.
30. [30] C. Fossaert, G. Rees, T. Maurickx and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 21-30.10.1007/BF02669791 ↗
31. [31] G.I. Rees, J. Perdrix, T. Maurickx and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1995, vol. 194, pp. 179-86.10.1016/0921-5093(94)09673-2 ↗
32. [32] C.S. Smith: Trans. Am. Soc. Metals, 1953, vol.45, pp. 533-75.
33. H. Réglé, N. Maruyama, and N. Yoshinaga: Proc. Int. Conf. Adv. High Strength Sheet Steels Automot. Appl., Winter Park, Colorado, 2004, pp. 239–46.
34. [34] M. Hillert: Decomposition of Austenite by Diffusional Processes, Interscience, New York, 1972.
35. [35] Z. Guo, C.S. Lee and J.W. Morris Jr: Acta Mater., 2004, vol. 52, pp. 5511 -18.10.1016/j.actamat.2004.08.011 ↗
36. [36] H. Kitahara, R. Ueji, N. Tsuji and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
37. [37] Y. You, C. Shang, W. Nie and S. Subramanian: Mater. Sci. Eng. A, 2012, vol. 558, pp. 692-701.10.1016/j.msea.2012.08.077 ↗
38. [38] Y. You, C. Shang, L. Chena and S. Subramanian: Mater. Sci. Eng. A, 2012, vol. 546, pp. 111-18.10.1016/j.msea.2012.03.038 ↗
39. [39] T. Furuhara, H. Kawata, S. Morito and T. Maki: Mater. Sci. Eng. A, 2006, vol. 431, pp. 228-36.10.1016/j.msea.2006.06.032 ↗
40. [40] N. Takayama, G. Miyamoto and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 2387-96.10.1016/j.actamat.2011.12.018 ↗
41. [41] T. Furuhara, H. Kawata, S. Morito, G. Miyamoto and T. Maki: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1003-13.10.1007/s11661-008-9510-9 ↗
42. [42] V. Pancholi, Madangopal Krishnan, I.S. Samajdar, V. Yadav and N.B. Ballal: Acta Mater., 2008, vol. 56, pp. 2037-50.10.1016/j.actamat.2007.12.057 ↗
43. [43] S. Morito, H. Tanaka, R. Konishi, T. Furuhara and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
44. [44] S. Morito, X. Huang, T. Furuhara, T. Maki and H. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
45. [45] A. Lambert-Perlade, A.F. Gourgues and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337-48.10.1016/j.actamat.2004.01.025 ↗
46. [46] H.K.D.H. Bhadeshia and D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265-73.10.1016/0001-6160(80)90082-6 ↗
47. [47] M. Hillert, L. Höglund and J. Ågren: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3693-700.10.1007/s11661-004-0275-5 ↗
48. [48] Y. Zhong, F. Xiao, J. Zhang, Y. Shan, W. Wang and K. Yang: Acta Mater., 2006, vol. 54, pp. 435-43.10.1016/j.actamat.2005.09.015 ↗
49. [49] Seok-Jae Lee, June-Soo Park and Young-Kook Lee: Scripta Mater., 2008, vol. 59, pp. 87-90.10.1016/j.scriptamat.2008.02.036 ↗
50. [50] X. Li, X. Ma, S.V. Subramanian, C. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2014, vol. 616, pp. 141-47.10.1016/j.msea.2014.07.100 ↗