journal article·2017-01

Fatigue Performance of Friction-Stir-Welded Al-Mg-Sc Alloy

Daria Zhemchuzhnikova, Sergey Mironov, Rustam Kaibyshev

Publisher page

Abstract

Fatigue behavior of a friction-stir-welded Al-Mg-Sc alloy was examined in cast and hot-rolled conditions. In both cases, the joints failed in the base material region and therefore the joint efficiency was 100 pct. The specimens machined entirely from the stir zone demonstrated fatigue strength superior to that of the base material in both preprocessed tempers. It was shown that the excellent fatigue performance of friction-stir joints was attributable to the ultra-fine-grained microstructure, the low dislocation density evolved in the stir zone, and the preservation of Al3Sc coherent dispersoids during welding. The formation of such structure hinders the initiation and growth of fatigue microcracks that provides superior fatigue performance of friction-stir welds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A. Munoz Cobello, G. Ruckert, B. Huneau, X. Sauvage, S. Marya: J. Mater. Proces. Technol., 2008, vol. 197, pp. 337–343.10.1016/j.jmatprotec.2007.06.035 ↗
2. D. Zhemchuzhnikova, A. Mogucheva, R. Kaibyshev: Mater. Sci. Eng. A, 2013, vol. 565, pp. 132–141.10.1016/j.msea.2012.12.017 ↗
3. J. Zhao, F. Jiang, H. Jian, K. Wen, L. Jiang, X. Chen: Mater. Design, 2010, vol. 31, pp. 306–311.10.1016/j.matdes.2009.06.012 ↗
4. X. Sauvage, A. Dede, A. Munoz Cabello, B. Huneau: Mater. Sci. Eng. A, 2008, vol. 491, pp. 346–371.10.1016/j.msea.2008.02.006 ↗
5. P. Yongyi, Y. Zhimin, L. Xuefeng, P. Qinglin, H. Zhenbo: Rare Metal Mater. Eng., 2011, vol. 40 (2), pp. 201–204.10.1016/S1875-5372(11)60015-5 ↗
6. S. Malopheyev, V. Kulitskiy, S. Mironov, D. Zhemchuzhnikova, R. Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 600, pp. 159–170.10.1016/j.msea.2014.02.018 ↗
7. N. Kumar, R.S. Mishra: Mater. Charact., 2012, vol. 74 (11), pp. 1–10.10.1016/j.matchar.2012.09.003 ↗
8. N.Q. Vo, D.C. Dunand, D.N. Seidman: Acta Mater., 2012, vol. 60, pp. 7078–7089.10.1016/j.actamat.2012.09.015 ↗
9. F.C. Liu, Z.Y. Ma: Scripta Mater., 2008, vol. 59, pp. 882–885.10.1016/j.scriptamat.2008.06.035 ↗
10. F.C. Liu, Z.Y. Ma, L.Q. Chen: Scr. Mater., 2009, vol. 60. pp. 968–971.10.1016/j.scriptamat.2009.02.021 ↗
11. F.C. Liu, Z.Y. Ma: Scr. Mater., 2010, vol. 62, pp. 125–128.10.1016/j.scriptamat.2009.10.010 ↗
12. F.C.Liu, Z.Y. Ma: Mater. Sci. Eng. A, 2011, vol. 530, pp. 548–558.10.1016/j.msea.2011.10.018 ↗
13. N. Kumar, R.S. Mishra, C.S. Huskamp, K.K. Sankaran: Scr. Mater., 2011, vol. 64, pp. 576–579.10.1016/j.scriptamat.2010.11.051 ↗
14. N. Kumar, R.S. Mishra, C.S. Huskamp, K.K. Sankaran: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5883–5887.10.1016/j.msea.2011.03.109 ↗
15. F.C. Liu, P. Xue, Z.Y. Ma: Mater. Sci. Eng. A, 2012, vol. 547, pp. 55–63.10.1016/j.msea.2012.03.076 ↗
16. F.C. Liu, Z.Y. Ma, F.C. Zhang: J. Mater. Sci. Technol., 2012, vol. 28 (11), pp. 1025–1030.10.1016/S1005-0302(12)60168-6 ↗
17. D. Zhemchuzhnikova, S. Malopheyev, S. Mironov, R.Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 598, pp. 387–395.10.1016/j.msea.2014.01.060 ↗
18. M. Goto, S.Z. Han, J. Kitamura, T. Yakushiji, J.H. Ahn, S.S. Kim, M. Baba, T. Yamamoto, J. Lee: Int. J. Fatig., 2015, vol. 73, pp. 98–109.10.1016/j.ijfatigue.2014.11.014 ↗
19. D.B. Williams, C.B. Carter, Transmission Electron Microscopy, A Text Book for Materials Science, Springer, 2009, p.820.10.1007/978-0-387-76501-3 ↗
20. M. Grujicic, G. Arakere, B. Pandurangan, A. Hariharan, C.-F. Yen, B.A. Cheeseman, C. Fountzoulas: J. Mater. Eng. Perform., 2011, vol. 20, pp. 855–864.10.1007/s11665-010-9725-y ↗
21. ASM Handbook: Fractography, vol. 12, ASM International—Materials Information Society, USA, 1987, p. 857.
22. ASM Handbook, Fracture and Fatigue, vol. 19, ASM International—Materials Information Society, USA, 1996, p. 2592.10.31399/asm.hb.v19.9781627081931 ↗
23. F. Ellyin (1997): Fatigue Damage, Crack Growth and Life Prediction, Chapman & Hall, London, pp. 12–441
24. J. Polák, J. Man: Int. J. Fatigue, 2016, vol.91, pp. 294–303.10.1016/j.ijfatigue.2016.02.021 ↗
25. P. Neumann: Acta Metal, 1974, vol.22, pp.1155–1165.10.1016/0001-6160(74)90071-6 ↗
26. P. Neumann: Acta Metal, 1969, vol.17, pp.1219–1225.10.1016/0001-6160(69)90099-6 ↗
27. A. Hunsche, P.Neumann: Acta Metal, 1986, vol.34, pp.207–217.10.1016/0001-6160(86)90192-6 ↗
28. A. Vinogradov: J Mater Sci, 2007, vol. 42, pp. 1797–1808.10.1007/s10853-006-0973-z ↗
29. S. Suresh (1998): Fatigue of materials, Cambridge University Press, Cambridge, vol. 2, pp. 37–8510.1017/CBO9780511806575 ↗
30. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
31. C. Zhou, X. Yang, G. Luan: J. Mater. Sci., 2006, vol. 41, pp. 2771–2777.10.1007/s10853-006-6337-x ↗
32. C. Zhou, X. Yang, G. Luan: Scr. Mater., 2005, vol.53, pp. 1187–1191.10.1016/j.scriptamat.2005.07.016 ↗
33. A. C. de Oliveira Miranda, A. Gerlich, Sc. Walbridge: Eng. Fracture Mech., 2015, vol. 147, pp. 243–260.10.1016/j.engfracmech.2015.09.007 ↗
34. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, P.J. Withers: Int. Mater. Rev., 2009, vol. 54, pp. 49–93.10.1179/174328009X411136 ↗
35. S. Mironov, K. Inagaki, Y.S. Sato & H. Kokawa; Phil. Mag., 2015, vol. 95, pp. 367–381.10.1080/14786435.2015.1006293 ↗
36. S. Mironov, N. Onuma, Y.S. Sato, H. Kokawa: Acta Mater., 2015, vol. 100, pp. 301–312.10.1016/j.actamat.2015.08.066 ↗
37. Y. Estrin, A. Vinogradov: Int. J. Fatig., 2010, vol. 32, pp. 898–907.10.1016/j.ijfatigue.2009.06.022 ↗
38. H Mughrabi, H.W. Hoppel: Int. J. Fatig., 2010, vol. 32, pp. 1413–1427.10.1016/j.ijfatigue.2009.10.007 ↗
39. A. Vinogradov, A. Washikita, K. Kitagawa, V.I. Kopylov: Mater. Sci. Eng., 2003, vol. A349, pp. 318–326.10.1016/S0921-5093(02)00813-4 ↗