Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds
Source abstract
Abstract
Characterization of the microstructural evolution of fusion welds in alloys slated for use in advanced ultrasupercritical (A-USC) boilers during creep has been performed. Creep-rupture specimens involving INCONEL® 740, NIMONIC® 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and Haynes® 282® (Haynes and 282 are registered trademarks of Haynes International) have been analyzed via light optical microscopy, scanning electron microscopy, X-ray diffraction, and thermodynamic and kinetic modeling. Focus has been given to the microstructures that develop along the grain boundaries in these alloys during creep at temperatures relevant to the A-USC process cycle, and particular attention has been paid to any evidence of the formation of local γ′-denuded or γ′-free zones. This work has been performed in an effort to understand the microstructural changes that lead to a weld strength reduction factor (WSRF) in these alloys as compared to solution annealed and aged alloy 740 base metal. γ′ precipitate-free zones have been identified in alloy 740 base metal, solution annealed alloy 740 weld metal, and alloy 263 weld metal after creep. Their development during long-term thermal exposure is correlated with the stabilization of phases that are rich in γ′-forming elements (e.g., η and G) and is suppressed by precipitation of phases that do not contain the γ′ formers (e.g., M23C6 and μ). The location of failure and creep performance in terms of rupture life and WSRF for each welded joint is presented and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. K. Burnard and O. Ito: in IEA Clean Coal Centre Workshop on Advanced Ultrasupercritical Coal-Fired Power Plants, Sept. 19–20, 2012, Vienna, Austria.
2. J.P. Shingledecker and I.G. Wright: in 8th Liège Conf. on Mater. for Advanced Power Engineering, Sept. 18–20, 2006, Liège, Belgium, Forschungszentrum Jülich GmbH, Jülich, Germany, 2006, vol. 1, pp. 107–20.
3. R. Viswanathan, R. Purgert, and U. Rao: in 7th Liège Conf. on Mater. for Advanced Power Engineering, Sept. 30–Oct. 2, 2002, Liège, Belgium, Forschungszentrum Jülich GmbH, Jülich, Germany, 2002, vol. 2, pp. 1109–29.
4. Viswanathan, R., Henry, J. F., Tanzosh, J., Stanko, G., Shingledecker, J., Vitalis, B., & Purgert, R., J. Mater. Eng. Perform., 2005, vol. 14, pp. 281-92.10.1361/10599490524039 ↗
5. Jablonski, P. D., Hawk, J. A., Cowen, C. J. & Maziasz, P. J., J. Mater., 2012, vol. 64, pp 271-79.
6. ASME Code Case 2702, ASME Boiler and Pressure Vessel Code, ASME International, New York, NY, 2012.
7. Evans, N. D., Maziasz, P. J., Swindeman, R. W., & Smith, G. D., Scripta Materialia, 2004, vol. 51, pp. 503-07.10.1016/j.scriptamat.2004.05.047 ↗
8. Zhao, S. Q., Jiang, Y., Dong, J. X. & Xie, X. S., Acta Metall. Sinica (English Letters), 2006, vol. 19, pp. 425-31.10.1016/S1006-7191(06)62083-8 ↗
9. Zhao, S., Xie, X., Smith, G. D. & Patel, S. J., Mater. Sci. Eng. A, 2003, vol. 355, pp. 96-105.10.1016/S0921-5093(03)00051-0 ↗
10. P.J. Ennis, A. Strang, S.P. Gill, G.M. McColvin, and H.V. Atkinson: Energy Mater., 2012, vol. 4, pp. 184–88.10.1179/174892312X13269692038978 ↗
11. R. Viswanathan, J.P. Shingledecker, J. Hawk, and S. Goodstine: in 2nd ECCC Creep Conf., Creep & Frac. in High Temp. Components, Apr. 21–23, 2009, Zurich, Switzerland, DEStech Publications, Inc., Lancaster, PA, 2009, vol. 1, pp. 31–43.
12. Zhao, J.-C., Ravikumar, V. & Beltran, A. M., Metall. Mater. Trans. A, 2001, vol. 32, pp. 1271-82.10.1007/s11661-001-0217-4 ↗
13. Bechetti, D. H., DuPont, J. N., deBarbadillo, J. J., Baker, B. A. & Watanabe, M., Metall. Mater. Trans. A, 2015, vol. 46, pp. 739-55.10.1007/s11661-014-2682-6 ↗
14. ASTM E139-11, Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials, Annual Book of ASTM Standards, vol. 03.01, ASTM International, West Conshohocken, PA, 2011.
15. Drouin, D., Couture, A. R., Joly D., Tastet, X., Aimez, V., & Gauvin, R., Scanning, 2007, vol. 29, pp. 92-101.10.1002/sca.20000 ↗
16. Andersson, J. O., Helander, T., Höglund, L., Shi, P. F., & Sundman, B., Calphad, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
17. ThermoTech TTNi7 Ni-Based Superalloys Thermodynamic Database Version 7, ThermoTech, Ltd., Guildford, U.K., 2006.
18. DuPont, J. N., Lippold, J. C., & Kiser, S. D., Welding Metallurgy and Weldability of Nickel-Base Alloys, 1st Ed., Wiley, Hoboken, NJ, 2011.
19. Thermo-Calc Software MOB2 TCS Alloy Mobility Database. Stockholm, Sweden: Thermo-Calc Software AB.
20. J.P. Shingledecker: in 7th Inter. Conf. on Advances in Mater. Tech. for Fossil Power Plants, Oct. 22–25, 2013, Waikoloa, HI, ASM International, Materials Park, OH, 2014, pp. 230–41.10.31399/asm.cp.am-epri-2013p0230 ↗
21. Reed, R. C., The Superalloys: Fundamentals and Applications, 1st Ed., Cambridge University Press, New York, NY, 2006.10.1017/CBO9780511541285 ↗
22. Wadsworth, J., Ruano, O. A. & Sherby, O. D., Metall. Mater. Trans. A, 2002, vol. 33, pp. 219-29.10.1007/s11661-002-0084-7 ↗
23. Tien, J. K. & Gamble, R. P., Metall. Mater. Trans. B, 1971, vol. 2, pp. 1663-67.10.1007/BF02913891 ↗
24. Maldonado, R. & Nembach, E., Acta Mater., 1997, vol. 45, pp. 213-24.10.1016/S1359-6454(96)00139-5 ↗
25. Partridge, A., Noble, F. W. & Tatlock, G. J., J. Nucl. Mater., 1992, vol. 186, pp. 100-16.10.1016/0022-3115(92)90327-H ↗
26. Fleetwood, M. J., J. Inst. Metals, 1961, vol. 90, pp. 429-30.
27. Wolfenstine, J., Ruano, O. A., Wadsworth, J. & Sherby, O. D., Scripta Metall. Mater. 1993, vol. 29, pp. 515-20.10.1016/0956-716X(93)90157-N ↗
28. Manna, I., Pabi, S. K. & Gust, W., Int. Mater. Rev., 2001, vol. 46, pp. 53-91.10.1179/095066001101528402 ↗
29. Williams, D. B. & Butler, E. P., Int. Mater. Rev., 1981, vol. 26, pp. 153-83.10.1179/imr.1981.26.1.153 ↗
30. Bechetti, D. H., Dupont, J. N., Debarbadillo, J. J. & Baker, B. A., Metall. Mater. Trans. A, 2014, vol. 45, pp. 3051-63.10.1007/s11661-014-2243-z ↗
31. Cowen, C. J., Danielson, P. E. & Jablonski, P. D., J. Mater. Eng. Perform., 2011, vol. 20, pp. 1078-83.10.1007/s11665-010-9731-0 ↗
32. B.A. Baker: in Superalloys 718, 625, 706, and Various Derivatives, Oct. 2-6, 2005, Pittsburgh, PA, TMS, Warrendale, PA, 2005, pp. 601–11.10.7449/2005/Superalloys_2005_601_611 ↗
33. X. Xie, C. Chi, H. Yu, Q. Yu, J. Dong, M. Chen, and S. Zhao: in 6th Inter. Conf. on Advances in Mater. Tech. for Fossil Power Plants, Santa Fe, NM, Aug. 31-Sept. 3, 2010, ASM International, Materials Park, OH, 2011, pp. 30–52.10.31399/asm.cp.am-epri-2010p0030 ↗
34. ASTM E112-10, Standard Test Methods for Determining Average Grain Size, Annual Book of ASTM Standards, vol. 03.01, ASTM International, West Conshohocken, PA, 2010.
35. Eisler, G. R. & Fuerschbach, P. W., in Proceedings: 7 th Inter. Conf. on Computer Tech. in Welding, July 8-11, 1997, San Francisco, CA, National Institute of Standards and Technology, Washington, D.C., 1998, pp. 257–68.
36. S.K. Srivastava, J.L. Caron, and L.M. Pike: in 7th Inter. Conf. on Advances in Mater. Tech. for Fossil Power Plants, Oct. 22–25, 2013, Waikoloa, HI, ASM International, Materials Park, OH, 2014, pp. 120–30.
37. Y. Yang, R.C. Thomson, R.M. Leese, and S. Roberts: in 7th Inter. Conf. on Advances in Mater. Tech. for Fossil Power Plants, Oct. 22–25, 2013, Waikoloa, HI, ASM International, Materials Park, OH, 2014, pp. 143–54.