Microstructural Analysis of Orientation-Dependent Recovery and Recrystallization in a Modified 9Cr-1Mo Steel Deformed by Compression at a High Strain Rate
Source abstract
Abstract
Abstract The evolution of the microstructure and texture during annealing of a modified ferritic/martensitic 9Cr-1Mo steel compressed by dynamic plastic deformation (DPD) to a strain of 2.3 has been investigated using transmission electron microscopy and electron backscatter diffraction. It is found that the duplex 〈111〉 + 〈100〉 fiber texture formed by DPD is transformed during annealing to a dominant 〈111〉 fiber texture, and that crystallites of the 〈111〉 component have an advantage during both nucleation and growth. Detailed characterization of the microstructural morphology, and estimation of the stored energies in 〈111〉- and 〈100〉-oriented regions in deformed and annealed samples, as well as investigations of the growth of recrystallizing grains, are used to analyze the annealing behavior. It is concluded that recrystallization in the given material occurs by a combination of oriented nucleation and oriented growth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H. Hu: Texture 1974, vol. 1, pp. 233-258.10.1155/TSM.1.233 ↗
2. I. L. Dillamore, H. Katoh and K. Haslam: Texture 1974, vol. 1, pp. 151-156.10.1155/TSM.1.151 ↗
3. Z. B. Zhang, O. V. Mishin, N. R. Tao and W. Pantleon: Mater. Sci. Technol. 2015, vol. 31, pp. 715-721.10.1179/1743284714Y.0000000652 ↗
4. Z.B. Zhang, N.R. Tao, O.V. Mishin and W. Pantleon: J. Mater. Sci. 2016, vol. 51, pp. 5545-5555.10.1007/s10853-016-9859-x ↗
5. Y. S. Li, N. R. Tao and K. Lu: Acta Mater. 2008, vol. 56, pp. 230-241.10.1016/j.actamat.2007.09.020 ↗
6. F. K. Yan, G. Z. Liu, N. R. Tao and K. Lu: Acta Mater. 2012, vol. 60, pp. 1059-1071.10.1016/j.actamat.2011.11.009 ↗
7. Z. B. Zhang, O. V. Mishin, N. R. Tao and W. Pantleon: J. Nucl. Mater. 2015, vol. 458, pp. 64-69.10.1016/j.jnucmat.2014.12.001 ↗
8. F. J. Humphreys: J. Mater. Sci. 2001, vol. 36, pp. 3833-3854.10.1023/A:1017973432592 ↗
9. O. V. Mishin, A. Godfrey and L. Ostensson: Metall. Mater. Trans. A 2006, vol. 37A, pp. 489-496.10.1007/s11661-006-0020-3 ↗
10. G. L. Wu and D. Juul Jensen: Mater. Charact. 2008, vol. 59, pp. 794-800.10.1016/j.matchar.2007.06.015 ↗
11. A. Godfrey, N. Hansen and D. Juul Jensen: Metall. Mater. Trans. A 2007, vol. 38A, pp. 2329-2339.10.1007/s11661-007-9279-2 ↗
12. A. Godfrey, W. Q. Cao, N. Hansen and Q. Liu: Metall. Mater. Trans. A 2005, vol. 36A, pp. 2371-2378.10.1007/s11661-005-0109-0 ↗
13. W. T. Read and W. Shockley: Phys. Rev. 1950, vol. 78, pp. 275-289.10.1103/PhysRev.78.275 ↗
14. W. T. Read: Dislocation in Solids, McGraw-Hill, New York, pp. 155-172, 1953.
15. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena. Elsevier, Oxford, 2004.
16. Y.B. Zhang, A. Godfrey, Q. Liu, W. Liu and D. Juul Jensen: Acta Mater. 2009, vol. 57, pp.2631-2639.10.1016/j.actamat.2009.01.039 ↗
17. J. O. Stiegler, C. K. H. Dubose R. E. Reed and C. J. McHargue: Acta Metall. 1963, vol. 11, pp. 851-860.10.1016/0001-6160(63)90054-3 ↗
18. R. A. Vandermeer and W. B. Snyder Jr.: Metall. Trans. A 1979, vol. 10, pp. 1031-1044.10.1007/BF02811649 ↗
19. K. Verbeken, L. Kestens, M.D. Nave: Acta Mater. 2005, vol. 53, pp.2675-2682.10.1016/j.actamat.2005.02.030 ↗
20. M. Sánchez-Araiza, S. Godet, P. J. Jacques and J. J. Jonas: Acta Mater. 2006, vol. 54, pp. 3085-3093.10.1016/j.actamat.2006.02.050 ↗
21. F. Huang, N. R. Tao and K. Lu: J. Mater. Sci. Techn. 2011, vol. 27, pp. 1-7.10.1016/S1005-0302(11)60017-0 ↗
22. Z. P. Luo, O. V. Mishin, Y. B. Zhang, H. W. Zhang and K. Lu: Scr. Mater. 2012, vol. 66, pp. 335-338.10.1016/j.scriptamat.2011.11.022 ↗
23. J. M. Rosenberg and H. R. Piehler: Metall. Trans. 1971, vol. 2, pp. 257-259.10.1007/BF02662666 ↗
24. Q. Xing, X. Huang and N. Hansen: Metall. Mater. Trans. A 2006, vol. 37A, pp. 1311-1322.10.1007/s11661-006-1083-x ↗
25. I. L. Dillamore, C. J. E. Smith and T. W. Watson: Metal Science 1967, vol. 1, pp. 49-54.10.1179/msc.1967.1.1.49 ↗
26. W.B. Hutchinson and L. Ryde: in 16th Risø International Symposium Materials Science, N. Hansen, D. Juul Jensen, Y.L. Liu, and B. Ralph, eds., Risø National Lab, Roskilde, 1995. p. 105.
27. I. Samajdar, B. Verlinden, P. Van Houtte and D. Vanderschueren: Mater. Sci. Eng. A 1997, vol. 238, pp. 343-350.10.1016/S0921-5093(97)00455-3 ↗
28. J. T. Park and J. A. Szpunar: Acta Mater. 2003, vol. 51, pp. 3037-3051.10.1016/S1359-6454(03)00115-0 ↗
29. R. L. Every and M. Hatherly: Texture 1974, vol. 1, pp. 183-194.10.1155/TSM.1.183 ↗
30. W.B. Hutchinson: Int. Met. Rev. 29 (1984) 25-42.10.1179/imtr.1984.29.1.25 ↗
31. D. Raabe: in 16th Risø International Symposium Materials Science, N. Hansen, D. Juul Jensen, Y.L. Liu, and B. Ralph, eds., Risø National Lab, Roskilde, 1995.
32. D. Raabe: Steel Research 1995, vol. 66, pp. 222-22910.1002/srin.199501116 ↗
33. M. Oyarzábal, A. Martínez-De-Guerenu and I. Gutiérrez: Mater. Sci. Eng. A 2008, vol. 485, pp. 200-209.10.1016/j.msea.2007.07.077 ↗
34. R. Khatirkar, B. Vadavadagi, S. K. Shekhawat, A. Haldar and I. Samajdar: ISIJ Int. 2012, vol. 52, pp. 884-893.10.2355/isijinternational.52.884 ↗
35. A.A. Gazder, M. Sánchez-Araiza, J.J. Jonas and E.V. Pereloma: Acta Mater 2011, vol. 59, pp. 4847-4865.10.1016/j.actamat.2011.04.027 ↗
36. D. Juul Jensen: Scr. Metall. Mater. 1992, vol. 27, pp. 533-538.10.1016/0956-716X(92)90335-C ↗